Dng04 » Пт ноя 25, 2011 10:02 am
Вот лог:
WTware 5.0.1 supervisor.
WTC listener active.
WTC broadcast listener active.
HTTPd listener active.
[KERNEL (unsync)] .0.0 (root@compiler) (gcc version 4.5.2 (Buildroot 2011.05-git) ) #1 PREEMPT Tue Aug 2 01:39:00 UTC 2011
[KERNEL] KERNEL supported cpus:
[KERNEL] Intel GenuineIntel
[KERNEL] AMD AuthenticAMD
[KERNEL] NSC Geode by NSC
[KERNEL] Cyrix CyrixInstead
[KERNEL] Centaur CentaurHauls
[KERNEL] Transmeta GenuineTMx86
[KERNEL] Transmeta TransmetaCPU
[KERNEL] UMC UMC UMC UMC
[KERNEL] BIOS-provided physical RAM map:
[KERNEL] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[KERNEL] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[KERNEL] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[KERNEL] BIOS-e820: 0000000000100000 - 000000007f5e0000 (usable)
[KERNEL] BIOS-e820: 000000007f5e0000 - 000000007f5e3000 (ACPI NVS)
[KERNEL] BIOS-e820: 000000007f5e3000 - 000000007f5f0000 (ACPI data)
[KERNEL] BIOS-e820: 000000007f5f0000 - 000000007f600000 (reserved)
[KERNEL] BIOS-e820: 00000000c0000000 - 00000000d0000000 (reserved)
[KERNEL] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[KERNEL] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[KERNEL] DMI 2.4 present.
[KERNEL] DMI: Gigabyte Technology Co., Ltd. EG31M-S2/EG31M-S2, BIOS FA 07/25/2008
[KERNEL] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[KERNEL] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[KERNEL] last_pfn = 0x7f5e0 max_arch_pfn = 0x100000
[KERNEL] MTRR default type: uncachable
[KERNEL] MTRR fixed ranges enabled:
[KERNEL] 00000-9FFFF write-back
[KERNEL] A0000-BFFFF uncachable
[KERNEL] C0000-CAFFF write-protect
[KERNEL] CB000-EFFFF uncachable
[KERNEL] F0000-FFFFF write-through
[KERNEL] MTRR variable ranges enabled:
[KERNEL] 0 base 000000000 mask F80000000 write-back
[KERNEL] 1 base 07F800000 mask FFF800000 uncachable
[KERNEL] 2 base 07F700000 mask FFFF00000 uncachable
[KERNEL] 3 base 07F600000 mask FFFF00000 uncachable
[KERNEL] 4 disabled
[KERNEL] 5 disabled
[KERNEL] 6 disabled
[KERNEL] 7 disabled
[KERNEL] Warning only 895MB will be used.
[KERNEL] Use a HIGHMEM enabled kernel.
[KERNEL] initial memory mapped : 0 - 00800000
[KERNEL] Base memory trampoline at [c009b000] 9b000 size 12288
[KERNEL] init_memory_mapping: 0000000000000000-0000000037fa0000
[KERNEL] 0000000000 - 0000400000 page 4k
[KERNEL] 0000400000 - 0037c00000 page 2M
[KERNEL] 0037c00000 - 0037fa0000 page 4k
[KERNEL] kernel direct mapping tables up to 37fa0000 @ 7fb000-800000
[KERNEL] early_memtest: # of tests: 1
[KERNEL] 0000010000 - 000009b000 pattern 0000000000000000
[KERNEL] 000009e000 - 000009e400 pattern 0000000000000000
[KERNEL] 000041d0f6 - 00007fb000 pattern 0000000000000000
[KERNEL] 00007fc000 - 0037fa0000 pattern 0000000000000000
[KERNEL] RAMDISK: 7f1ea000 - 7f5bf000
[KERNEL] Allocated new RAMDISK: 37bcb000 - 37f9fe04
[KERNEL] Move RAMDISK from 000000007f1ea000 - 000000007f5bee03 to 37bcb000 - 37f9fe03
[KERNEL] ACPI: RSDP 000f6be0 00014 (v00 GBT )
[KERNEL] ACPI: RSDT 7f5e3040 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[KERNEL] ACPI: FACP 7f5e30c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[KERNEL] ACPI: DSDT 7f5e3180 04363 (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
[KERNEL] ACPI: FACS 7f5e0000 00040
[KERNEL] ACPI: HPET 7f5e7640 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[KERNEL] ACPI: MCFG 7f5e76c0 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[KERNEL] ACPI: APIC 7f5e7540 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[KERNEL] ACPI: SSDT 7f5e7d60 003AB (v01 PmRef CpuPm 00003000 INTL 20040311)
[KERNEL] ACPI: Local APIC address 0xfee00000
[KERNEL] 895MB LOWMEM available.
[KERNEL] mapped low ram: 0 - 37fa0000
[KERNEL] low ram: 0 - 37fa0000
[KERNEL] Zone PFN ranges:
[KERNEL] DMA 0x00000010 -> 0x00001000
[KERNEL] Normal 0x00001000 -> 0x00037fa0
[KERNEL] Movable zone start PFN for each node
[KERNEL] early_node_map[2] active PFN ranges
[KERNEL] 0: 0x00000010 -> 0x0000009f
[KERNEL] 0: 0x00000100 -> 0x00037fa0
[KERNEL] On node 0 totalpages: 229167
[KERNEL] free_area_init_node: node 0, pgdat c03b0e60, node_mem_map f74cb200
[KERNEL] DMA zone: 32 pages used for memmap
[KERNEL] DMA zone: 0 pages reserved
[KERNEL] DMA zone: 3951 pages, LIFO batch:0
[KERNEL] Normal zone: 1760 pages used for memmap
[KERNEL] Normal zone: 223424 pages, LIFO batch:31
[KERNEL] Using APIC driver default
[KERNEL] ACPI: PM-Timer IO Port: 0x408
[KERNEL] ACPI: Local APIC address 0xfee00000
[KERNEL] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[KERNEL] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[KERNEL] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 1/0x1 ignored.
[KERNEL] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[KERNEL] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[KERNEL] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[KERNEL] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[KERNEL] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[KERNEL] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[KERNEL] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[KERNEL] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[KERNEL] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[KERNEL] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[KERNEL] ACPI: IRQ0 used by override.
[KERNEL] ACPI: IRQ2 used by override.
[KERNEL] ACPI: IRQ9 used by override.
[KERNEL] Using ACPI (MADT) for SMP configuration information
[KERNEL] nr_irqs_gsi: 40
[KERNEL] Allocating PCI resources starting at 7f600000 (gap: 7f600000:40a00000)
[KERNEL] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[KERNEL] pcpu-alloc: [0] 0
[KERNEL] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227375
[KERNEL] Kernel command line: root=/dev/ram0 ramdisk_blocksize=4096 ramdisk_size=8192 memtest=1 quiet initrd=packages/initrd BOOT_IMAGE=packages/kernel
[KERNEL] PID hash table entries: 4096 (order: 2, 16384 bytes)
[KERNEL] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[KERNEL] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[KERNEL] Initializing CPU#0
[KERNEL] Memory: 901532k/917120k available (2179k kernel code, 15136k reserved, 586k data, 292k init, 0k highmem)
[KERNEL] virtual kernel memory layout:
[KERNEL] fixmap : 0xfffa2000 - 0xfffff000 ( 372 kB)
[KERNEL] vmalloc : 0xf87a0000 - 0xfffa0000 ( 120 MB)
[KERNEL] lowmem : 0xc0000000 - 0xf7fa0000 ( 895 MB)
[KERNEL] .init : 0xc03b4000 - 0xc03fd000 ( 292 kB)
[KERNEL] .data : 0xc0320c9b - 0xc03b35c0 ( 586 kB)
[KERNEL] .text : 0xc0100000 - 0xc0320c9b (2179 kB)
[KERNEL] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[KERNEL] NR_IRQS:288
[KERNEL] CPU 0 irqstacks, hard=f6c08000 soft=f6c0a000
[KERNEL] Console: colour VGA+ 80x25
[KERNEL] console [tty0] enabled
[KERNEL] Fast TSC calibration using PIT
[KERNEL] Detected 2500.298 MHz processor.
[KERNEL] Calibrating delay loop (skipped), value calculated using timer frequency.. 5000.59 BogoMIPS (lpj=2500298)
[KERNEL] pid_max: default: 32768 minimum: 301
[KERNEL] Mount-cache hash table entries: 512
[KERNEL] using mwait in idle threads.
[KERNEL] CPU: Intel Pentium(R) Dual-Core CPU E5200 @ 2.50GHz stepping 06
[KERNEL] ACPI: Core revision 20110413
[KERNEL] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[KERNEL] ... version: 2
[KERNEL] ... bit width: 40
[KERNEL] ... generic registers: 2
[KERNEL] ... value mask: 000000ffffffffff
[KERNEL] ... max period: 000000007fffffff
[KERNEL] ... fixed-purpose events: 3
[KERNEL] ... event mask: 0000000700000003
[KERNEL] Enabling APIC mode: Flat. Using 1 I/O APICs
[KERNEL] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[KERNEL] NET: Registered protocol family 16
[KERNEL] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[KERNEL] ACPI: bus type pci registered
[KERNEL] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000)
[KERNEL] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved in E820
[KERNEL] PCI: Using MMCONFIG for extended config space
[KERNEL] PCI: Using configuration type 1 for base access
[KERNEL] bio: create slab <bio-0> at 0
[KERNEL] ACPI: EC: Look up EC in DSDT
[KERNEL] ACPI: SSDT 7f5e7740 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
[KERNEL] ACPI: Dynamic OEM Table Load:
[KERNEL] ACPI: SSDT (null) 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
[KERNEL] ACPI: Interpreter enabled
[KERNEL] ACPI: (supports S0 S3 S5)
[KERNEL] ACPI: Using IOAPIC for interrupt routing
[KERNEL] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[KERNEL] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[KERNEL] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[KERNEL] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[KERNEL] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[KERNEL] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[KERNEL] pci_root PNP0A03:00: host bridge window [mem 0x7f600000-0xfebfffff]
[KERNEL] pci 0000:00:00.0: [8086:29c0] type 0 class 0x000600
[KERNEL] pci 0000:00:02.0: [8086:29c2] type 0 class 0x000300
[KERNEL] pci 0000:00:02.0: reg 10: [mem 0xe1200000-0xe127ffff]
[KERNEL] pci 0000:00:02.0: reg 14: [io 0xe000-0xe007]
[KERNEL] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
[KERNEL] pci 0000:00:02.0: reg 1c: [mem 0xe1000000-0xe10fffff]
[KERNEL] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[KERNEL] pci 0000:00:1b.0: reg 10: [mem 0xe1280000-0xe1283fff 64bit]
[KERNEL] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[KERNEL] pci 0000:00:1b.0: PME# disabled
[KERNEL] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[KERNEL] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[KERNEL] pci 0000:00:1c.0: PME# disabled
[KERNEL] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
[KERNEL] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[KERNEL] pci 0000:00:1c.1: PME# disabled
[KERNEL] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[KERNEL] pci 0000:00:1d.0: reg 20: [io 0xe100-0xe11f]
[KERNEL] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[KERNEL] pci 0000:00:1d.1: reg 20: [io 0xe200-0xe21f]
[KERNEL] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[KERNEL] pci 0000:00:1d.2: reg 20: [io 0xe300-0xe31f]
[KERNEL] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[KERNEL] pci 0000:00:1d.3: reg 20: [io 0xe400-0xe41f]
[KERNEL] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[KERNEL] pci 0000:00:1d.7: reg 10: [mem 0xe1284000-0xe12843ff]
[KERNEL] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[KERNEL] pci 0000:00:1f.0: [8086:27b8] type 0 class 0x000601
[KERNEL] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[KERNEL] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[KERNEL] pci 0000:00:1f.2: [8086:27c0] type 0 class 0x000101
[KERNEL] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007]
[KERNEL] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003]
[KERNEL] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007]
[KERNEL] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003]
[KERNEL] pci 0000:00:1f.2: reg 20: [io 0xf000-0xf00f]
[KERNEL] pci 0000:00:1f.2: PME# supported from D3hot
[KERNEL] pci 0000:00:1f.2: PME# disabled
[KERNEL] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
[KERNEL] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
[KERNEL] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[KERNEL] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
[KERNEL] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[KERNEL] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[KERNEL] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
[KERNEL] pci 0000:02:00.0: reg 10: [io 0xd000-0xd0ff]
[KERNEL] pci 0000:02:00.0: reg 18: [mem 0xe1110000-0xe1110fff 64bit pref]
[KERNEL] pci 0000:02:00.0: reg 20: [mem 0xe1100000-0xe110ffff 64bit pref]
[KERNEL] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[KERNEL] pci 0000:02:00.0: supports D1 D2
[KERNEL] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[KERNEL] pci 0000:02:00.0: PME# disabled
[KERNEL] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[KERNEL] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
[KERNEL] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe0ffffff]
[KERNEL] pci 0000:00:1c.1: bridge window [mem 0xe1100000-0xe11fffff 64bit pref]
[KERNEL] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[KERNEL] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff]
[KERNEL] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[KERNEL] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[KERNEL] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[KERNEL] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[KERNEL] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[KERNEL] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[KERNEL] pci 0000:00:1e.0: bridge window [mem 0x7f600000-0xfebfffff] (subtractive decode)
[KERNEL] pci_bus 0000:00: on NUMA node 0
[KERNEL] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[KERNEL] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[KERNEL] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[KERNEL] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[KERNEL] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x09)
[KERNEL] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[KERNEL] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[KERNEL] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[KERNEL] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[KERNEL] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[KERNEL] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[KERNEL] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[KERNEL] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[KERNEL] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[KERNEL] vgaarb: loaded
[KERNEL] vgaarb: bridge control possible 0000:00:02.0
[KERNEL] usbcore: registered new interface driver usbfs
[KERNEL] usbcore: registered new interface driver hub
[KERNEL] usbcore: registered new device driver usb
[KERNEL] PCI: Using ACPI for IRQ routing
[KERNEL] PCI: pci_cache_line_size set to 64 bytes
[KERNEL] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[KERNEL] reserve RAM buffer: 000000007f5e0000 - 000000007fffffff
[KERNEL] pnp: PnP ACPI init
[KERNEL] ACPI: bus type pnp registered
[KERNEL] pnp 00:00: [bus 00-ff]
[KERNEL] pnp 00:00: [io 0x0cf8-0x0cff]
[KERNEL] pnp 00:00: [io 0x0000-0x0cf7 window]
[KERNEL] pnp 00:00: [io 0x0d00-0xffff window]
[KERNEL] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[KERNEL] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[KERNEL] pnp 00:00: [mem 0x7f600000-0xfebfffff window]
[KERNEL] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[KERNEL] pnp 00:01: [io 0x0010-0x001f]
[KERNEL] pnp 00:01: [io 0x0022-0x003f]
[KERNEL] pnp 00:01: [io 0x0044-0x005f]
[KERNEL] pnp 00:01: [io 0x0062-0x0063]
[KERNEL] pnp 00:01: [io 0x0065-0x006f]
[KERNEL] pnp 00:01: [io 0x0074-0x007f]
[KERNEL] pnp 00:01: [io 0x0091-0x0093]
[KERNEL] pnp 00:01: [io 0x00a2-0x00bf]
[KERNEL] pnp 00:01: [io 0x00e0-0x00ef]
[KERNEL] pnp 00:01: [io 0x04d0-0x04d1]
[KERNEL] pnp 00:01: [io 0x0290-0x029f]
[KERNEL] pnp 00:01: [io 0x0800-0x087f]
[KERNEL] pnp 00:01: [io 0x0290-0x0294]
[KERNEL] pnp 00:01: [io 0x0880-0x088f]
[KERNEL] system 00:01: [io 0x04d0-0x04d1] has been reserved
[KERNEL] system 00:01: [io 0x0290-0x029f] has been reserved
[KERNEL] system 00:01: [io 0x0800-0x087f] has been reserved
[KERNEL] system 00:01: [io 0x0290-0x0294] has been reserved
[KERNEL] system 00:01: [io 0x0880-0x088f] has been reserved
[KERNEL] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[KERNEL] pnp 00:02: [dma 4]
[KERNEL] pnp 00:02: [io 0x0000-0x000f]
[KERNEL] pnp 00:02: [io 0x0080-0x0090]
[KERNEL] pnp 00:02: [io 0x0094-0x009f]
[KERNEL] pnp 00:02: [io 0x00c0-0x00df]
[KERNEL] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[KERNEL] pnp 00:03: [irq 0 disabled]
[KERNEL] pnp 00:03: [irq 8]
[KERNEL] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[KERNEL] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[KERNEL] pnp 00:04: [io 0x0070-0x0073]
[KERNEL] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[KERNEL] pnp 00:05: [io 0x0061]
[KERNEL] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[KERNEL] pnp 00:06: [io 0x00f0-0x00ff]
[KERNEL] pnp 00:06: [irq 13]
[KERNEL] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[KERNEL] pnp 00:07: [io 0x03f0-0x03f5]
[KERNEL] pnp 00:07: [io 0x03f7]
[KERNEL] pnp 00:07: [irq 6]
[KERNEL] pnp 00:07: [dma 2]
[KERNEL] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[KERNEL] pnp 00:08: [io 0x03f8-0x03ff]
[KERNEL] pnp 00:08: [irq 4]
[KERNEL] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[KERNEL] pnp 00:09: [io 0x02f8-0x02ff]
[KERNEL] pnp 00:09: [irq 3]
[KERNEL] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[KERNEL] pnp 00:0a: [io 0x0378-0x037f]
[KERNEL] pnp 00:0a: [irq 7]
[KERNEL] pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active)
[KERNEL] pnp 00:0b: [irq 12]
[KERNEL] pnp 00:0b: Plug and Play ACPI device, IDs PNP0f13 (active)
[KERNEL] pnp 00:0c: [io 0x0060]
[KERNEL] pnp 00:0c: [io 0x0064]
[KERNEL] pnp 00:0c: [irq 1]
[KERNEL] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 (active)
[KERNEL] pnp 00:0d: [io 0x0400-0x04bf]
[KERNEL] system 00:0d: [io 0x0400-0x04bf] has been reserved
[KERNEL] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[KERNEL] pnp 00:0e: [mem 0xc0000000-0xcfffffff]
[KERNEL] system 00:0e: [mem 0xc0000000-0xcfffffff] has been reserved
[KERNEL] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
[KERNEL] pnp 00:0f: [mem 0x000cd000-0x000cffff]
[KERNEL] pnp 00:0f: [mem 0x000f0000-0x000f7fff]
[KERNEL] pnp 00:0f: [mem 0x000f8000-0x000fbfff]
[KERNEL] pnp 00:0f: [mem 0x000fc000-0x000fffff]
[KERNEL] pnp 00:0f: [mem 0x7f5e0000-0x7f5fffff]
[KERNEL] pnp 00:0f: [mem 0x00000000-0x0009ffff]
[KERNEL] pnp 00:0f: [mem 0x00100000-0x7f5dffff]
[KERNEL] pnp 00:0f: [mem 0xfec00000-0xfec00fff]
[KERNEL] pnp 00:0f: [mem 0xfed13000-0xfed1dfff]
[KERNEL] pnp 00:0f: [mem 0xfed20000-0xfed8ffff]
[KERNEL] pnp 00:0f: [mem 0xfee00000-0xfee00fff]
[KERNEL] pnp 00:0f: [mem 0xffb00000-0xffb7ffff]
[KERNEL] pnp 00:0f: [mem 0xfff00000-0xffffffff]
[KERNEL] pnp 00:0f: [mem 0x000e0000-0x000effff]
[KERNEL] system 00:0f: [mem 0x000cd000-0x000cffff] has been reserved
[KERNEL] system 00:0f: [mem 0x000f0000-0x000f7fff] could not be reserved
[KERNEL] system 00:0f: [mem 0x000f8000-0x000fbfff] could not be reserved
[KERNEL] system 00:0f: [mem 0x000fc000-0x000fffff] could not be reserved
[KERNEL] system 00:0f: [mem 0x7f5e0000-0x7f5fffff] could not be reserved
[KERNEL] system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
[KERNEL] system 00:0f: [mem 0x00100000-0x7f5dffff] could not be reserved
[KERNEL] system 00:0f: [mem 0xfec00000-0xfec00fff] could not be reserved
[KERNEL] system 00:0f: [mem 0xfed13000-0xfed1dfff] has been reserved
[KERNEL] system 00:0f: [mem 0xfed20000-0xfed8ffff] has been reserved
[KERNEL] system 00:0f: [mem 0xfee00000-0xfee00fff] has been reserved
[KERNEL] system 00:0f: [mem 0xffb00000-0xffb7ffff] has been reserved
[KERNEL] system 00:0f: [mem 0xfff00000-0xffffffff] has been reserved
[KERNEL] system 00:0f: [mem 0x000e0000-0x000effff] has been reserved
[KERNEL] system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
[KERNEL] pnp 00:10: [mem 0xffb80000-0xffbfffff]
[KERNEL] pnp 00:10: Plug and Play ACPI device, IDs INT0800 (active)
[KERNEL] pnp: PnP ACPI: found 17 devices
[KERNEL] ACPI: ACPI bus type pnp unregistered
[KERNEL] Switching to clocksource acpi_pm
[KERNEL] PCI: max bus depth: 1 pci_try_num: 2
[KERNEL] pci 0000:00:1c.0: BAR 8: assigned [mem 0x7f600000-0x7f7fffff]
[KERNEL] pci 0000:00:1c.0: BAR 9: assigned [mem 0x7f800000-0x7f9fffff 64bit pref]
[KERNEL] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[KERNEL] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
[KERNEL] pci 0000:00:1c.0: bridge window [mem 0x7f600000-0x7f7fffff]
[KERNEL] pci 0000:00:1c.0: bridge window [mem 0x7f800000-0x7f9fffff 64bit pref]
[KERNEL] pci 0000:02:00.0: BAR 6: assigned [mem 0xe1120000-0xe112ffff pref]
[KERNEL] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[KERNEL] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
[KERNEL] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe0ffffff]
[KERNEL] pci 0000:00:1c.1: bridge window [mem 0xe1100000-0xe11fffff 64bit pref]
[KERNEL] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[KERNEL] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff]
[KERNEL] pci 0000:00:1e.0: bridge window [mem disabled]
[KERNEL] pci 0000:00:1e.0: bridge window [mem pref disabled]
[KERNEL] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[KERNEL] pci 0000:00:1c.0: setting latency timer to 64
[KERNEL] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[KERNEL] pci 0000:00:1c.1: setting latency timer to 64
[KERNEL] pci 0000:00:1e.0: setting latency timer to 64
[KERNEL] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[KERNEL] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[KERNEL] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[KERNEL] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[KERNEL] pci_bus 0000:00: resource 8 [mem 0x7f600000-0xfebfffff]
[KERNEL] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[KERNEL] pci_bus 0000:01: resource 1 [mem 0x7f600000-0x7f7fffff]
[KERNEL] pci_bus 0000:01: resource 2 [mem 0x7f800000-0x7f9fffff 64bit pref]
[KERNEL] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[KERNEL] pci_bus 0000:02: resource 1 [mem 0xe0000000-0xe0ffffff]
[KERNEL] pci_bus 0000:02: resource 2 [mem 0xe1100000-0xe11fffff 64bit pref]
[KERNEL] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
[KERNEL] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[KERNEL] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[KERNEL] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[KERNEL] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
[KERNEL] pci_bus 0000:03: resource 8 [mem 0x7f600000-0xfebfffff]
[KERNEL] NET: Registered protocol family 2
[KERNEL] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[KERNEL] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[KERNEL] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[KERNEL] TCP: Hash tables configured (established 131072 bind 65536)
[KERNEL] TCP reno registered
[KERNEL] UDP hash table entries: 512 (order: 1, 8192 bytes)
[KERNEL] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
[KERNEL] NET: Registered protocol family 1
[KERNEL] pci 0000:00:02.0: Boot video device
[KERNEL] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x2f00
[KERNEL] pci 0000:00:1d.0: Performing full reset
[KERNEL] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x2000
[KERNEL] pci 0000:00:1d.1: Performing full reset
[KERNEL] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x2000
[KERNEL] pci 0000:00:1d.2: Performing full reset
[KERNEL] pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x2000
[KERNEL] pci 0000:00:1d.3: Performing full reset
[KERNEL] PCI: CLS 32 bytes, default 64
[KERNEL] Freeing initrd memory: 3924k freed
[KERNEL] ROMFS MTD (C) 2007 Red Hat, Inc.
[KERNEL] msgmni has been set to 1768
[KERNEL] io scheduler noop registered
[KERNEL] io scheduler cfq registered (default)
[KERNEL] pcieport 0000:00:1c.0: setting latency timer to 64
[KERNEL] pcieport 0000:00:1c.1: setting latency timer to 64
[KERNEL] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[KERNEL] ACPI: Power Button [PWRB]
[KERNEL] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[KERNEL] ACPI: Power Button [PWRF]
[KERNEL] ACPI: acpi_idle registered with cpuidle
[KERNEL] brd: module loaded
[KERNEL] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[KERNEL] ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96
[KERNEL] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[KERNEL] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[KERNEL] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[KERNEL] drivers/usb/core/inode.c: creating file 'devices'
[KERNEL] drivers/usb/core/inode.c: creating file '001'
[KERNEL] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[KERNEL] ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8
[KERNEL] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
[KERNEL] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[KERNEL] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[KERNEL] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[KERNEL] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
[KERNEL] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe1284000
[KERNEL] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[KERNEL] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[KERNEL] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[KERNEL] usb usb1: default language 0x0409
[KERNEL] usb usb1: udev 1, busnum 1, minor = 0
[KERNEL] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[KERNEL] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[KERNEL] usb usb1: Product: EHCI Host Controller
[KERNEL] usb usb1: Manufacturer: Linux 3.0.0 ehci_hcd
[KERNEL] usb usb1: SerialNumber: 0000:00:1d.7
[KERNEL] usb usb1: usb_probe_device
[KERNEL] usb usb1: configuration #1 chosen from 1 choice
[KERNEL] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[KERNEL] hub 1-0:1.0: usb_probe_interface
[KERNEL] hub 1-0:1.0: usb_probe_interface - got id
[KERNEL] hub 1-0:1.0: USB hub found
[KERNEL] hub 1-0:1.0: 8 ports detected
[KERNEL] hub 1-0:1.0: standalone hub
[KERNEL] hub 1-0:1.0: no power switching (usb 1.0)
[KERNEL] hub 1-0:1.0: individual port over-current protection
[KERNEL] hub 1-0:1.0: power on to power good time: 20ms
[KERNEL] hub 1-0:1.0: local power source is good
[KERNEL] hub 1-0:1.0: trying to enable port power on non-switchable hub
[KERNEL] drivers/usb/core/inode.c: creating file '001'
[KERNEL] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[KERNEL] ohci_hcd: block sizes: ed 64 td 64
[KERNEL] uhci_hcd: USB Universal Host Controller Interface driver
[KERNEL] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[KERNEL] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[KERNEL] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[KERNEL] drivers/usb/core/inode.c: creating file '002'
[KERNEL] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[KERNEL] uhci_hcd 0000:00:1d.0: detected 2 ports
[KERNEL] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
[KERNEL] uhci_hcd 0000:00:1d.0: Performing full reset
[KERNEL] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
[KERNEL] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e100
[KERNEL] usb usb2: default language 0x0409
[KERNEL] usb usb2: udev 1, busnum 2, minor = 128
[KERNEL] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[KERNEL] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[KERNEL] usb usb2: Product: UHCI Host Controller
[KERNEL] usb usb2: Manufacturer: Linux 3.0.0 uhci_hcd
[KERNEL] usb usb2: SerialNumber: 0000:00:1d.0
[KERNEL] usb usb2: usb_probe_device
[KERNEL] usb usb2: configuration #1 chosen from 1 choice
[KERNEL] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[KERNEL] hub 2-0:1.0: usb_probe_interface
[KERNEL] hub 2-0:1.0: usb_probe_interface - got id
[KERNEL] hub 2-0:1.0: USB hub found
[KERNEL] hub 2-0:1.0: 2 ports detected
[KERNEL] hub 2-0:1.0: standalone hub
[KERNEL] hub 2-0:1.0: no power switching (usb 1.0)
[KERNEL] hub 2-0:1.0: individual port over-current protection
[KERNEL] hub 2-0:1.0: power on to power good time: 2ms
[KERNEL] hub 2-0:1.0: local power source is good
[KERNEL] hub 2-0:1.0: trying to enable port power on non-switchable hub
[KERNEL] drivers/usb/core/inode.c: creating file '001'
[KERNEL] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0
[KERNEL] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[KERNEL] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[KERNEL] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[KERNEL] drivers/usb/core/inode.c: creating file '003'
[KERNEL] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[KERNEL] uhci_hcd 0000:00:1d.1: detected 2 ports
[KERNEL] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
[KERNEL] uhci_hcd 0000:00:1d.1: Performing full reset
[KERNEL] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
[KERNEL] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e200
[KERNEL] usb usb3: default language 0x0409
[KERNEL] usb usb3: udev 1, busnum 3, minor = 256
[KERNEL] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[KERNEL] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[KERNEL] usb usb3: Product: UHCI Host Controller
[KERNEL] usb usb3: Manufacturer: Linux 3.0.0 uhci_hcd
[KERNEL] usb usb3: SerialNumber: 0000:00:1d.1
[KERNEL] usb usb3: usb_probe_device
[KERNEL] usb usb3: configuration #1 chosen from 1 choice
[KERNEL] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[KERNEL] hub 3-0:1.0: usb_probe_interface
[KERNEL] hub 3-0:1.0: usb_probe_interface - got id
[KERNEL] hub 3-0:1.0: USB hub found
[KERNEL] hub 3-0:1.0: 2 ports detected
[KERNEL] hub 3-0:1.0: standalone hub
[KERNEL] hub 3-0:1.0: no power switching (usb 1.0)
[KERNEL] hub 3-0:1.0: individual port over-current protection
[KERNEL] hub 3-0:1.0: power on to power good time: 2ms
[KERNEL] hub 3-0:1.0: local power source is good
[KERNEL] hub 3-0:1.0: trying to enable port power on non-switchable hub
[KERNEL] drivers/usb/core/inode.c: creating file '001'
[KERNEL] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1
[KERNEL] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[KERNEL] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[KERNEL] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[KERNEL] drivers/usb/core/inode.c: creating file '004'
[KERNEL] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[KERNEL] uhci_hcd 0000:00:1d.2: detected 2 ports
[KERNEL] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
[KERNEL] uhci_hcd 0000:00:1d.2: Performing full reset
[KERNEL] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
[KERNEL] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e300
[KERNEL] usb usb4: default language 0x0409
[KERNEL] usb usb4: udev 1, busnum 4, minor = 384
[KERNEL] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[KERNEL] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[KERNEL] usb usb4: Product: UHCI Host Controller
[KERNEL] usb usb4: Manufacturer: Linux 3.0.0 uhci_hcd
[KERNEL] usb usb4: SerialNumber: 0000:00:1d.2
[KERNEL] usb usb4: usb_probe_device
[KERNEL] usb usb4: configuration #1 chosen from 1 choice
[KERNEL] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[KERNEL] hub 4-0:1.0: usb_probe_interface
[KERNEL] hub 4-0:1.0: usb_probe_interface - got id
[KERNEL] hub 4-0:1.0: USB hub found
[KERNEL] hub 4-0:1.0: 2 ports detected
[KERNEL] hub 4-0:1.0: standalone hub
[KERNEL] hub 4-0:1.0: no power switching (usb 1.0)
[KERNEL] hub 4-0:1.0: individual port over-current protection
[KERNEL] hub 4-0:1.0: power on to power good time: 2ms
[KERNEL] hub 4-0:1.0: local power source is good
[KERNEL] hub 4-0:1.0: trying to enable port power on non-switchable hub
[KERNEL] drivers/usb/core/inode.c: creating file '001'
[KERNEL] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2
[KERNEL] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[KERNEL] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[KERNEL] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[KERNEL] drivers/usb/core/inode.c: creating file '005'
[KERNEL] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[KERNEL] uhci_hcd 0000:00:1d.3: detected 2 ports
[KERNEL] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000
[KERNEL] uhci_hcd 0000:00:1d.3: Performing full reset
[KERNEL] uhci_hcd 0000:00:1d.3: supports USB remote wakeup
[KERNEL] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e400
[KERNEL] usb usb5: default language 0x0409
[KERNEL] usb usb5: udev 1, busnum 5, minor = 512
[KERNEL] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[KERNEL] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[KERNEL] usb usb5: Product: UHCI Host Controller
[KERNEL] usb usb5: Manufacturer: Linux 3.0.0 uhci_hcd
[KERNEL] usb usb5: SerialNumber: 0000:00:1d.3
[KERNEL] usb usb5: usb_probe_device
[KERNEL] usb usb5: configuration #1 chosen from 1 choice
[KERNEL] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[KERNEL] hub 5-0:1.0: usb_probe_interface
[KERNEL] hub 5-0:1.0: usb_probe_interface - got id
[KERNEL] hub 5-0:1.0: USB hub found
[KERNEL] hub 5-0:1.0: 2 ports detected
[KERNEL] hub 5-0:1.0: standalone hub
[KERNEL] hub 5-0:1.0: no power switching (usb 1.0)
[KERNEL] hub 5-0:1.0: individual port over-current protection
[KERNEL] hub 5-0:1.0: power on to power good time: 2ms
[KERNEL] hub 5-0:1.0: local power source is good
[KERNEL] hub 5-0:1.0: trying to enable port power on non-switchable hub
[KERNEL] drivers/usb/core/inode.c: creating file '001'
[KERNEL] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.3
[KERNEL] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[KERNEL] serio: i8042 KBD port at 0x60,0x64 irq 1
[KERNEL] serio: i8042 AUX port at 0x60,0x64 irq 12
[KERNEL] mousedev: PS/2 mouse device common for all mice
[KERNEL] input: PC Speaker as /devices/platform/pcspkr/input/input2
[KERNEL] cpuidle: using governor ladder
[KERNEL] usbcore: registered new interface driver usbhid
[KERNEL] usbhid: USB HID core driver
[KERNEL] TCP cubic registered
[KERNEL] NET: Registered protocol family 17
[KERNEL] Using IPI Shortcut mode
[KERNEL] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[KERNEL] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 001803 0 ACK POWER sig=j CSC CONNECT
[KERNEL] hub 1-0:1.0: port 8: status 0501 change 0001
[KERNEL] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
[KERNEL] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[KERNEL] uhci_hcd 0000:00:1d.3: port 2 portsc 008a,00
[KERNEL] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[KERNEL] hub 1-0:1.0: state 7 ports 8 chg 0100 evt 0000
[KERNEL] hub 1-0:1.0: port 8, status 0501, change 0000, 480 Mb/s
[KERNEL] ehci_hcd 0000:00:1d.7: port 8 high speed
[KERNEL] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 001005 0 ACK POWER sig=se0 PE CONNECT
[KERNEL] usb 1-8: new high speed USB device number 2 using ehci_hcd
[KERNEL] ehci_hcd 0000:00:1d.7: port 8 high speed
[KERNEL] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 001005 0 ACK POWER sig=se0 PE CONNECT
[KERNEL] usb 1-8: default language 0x0409
[KERNEL] usb 1-8: udev 2, busnum 1, minor = 1
[KERNEL] usb 1-8: New USB device found, idVendor=03f0, idProduct=2b17
[KERNEL] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[KERNEL] usb 1-8: Product: HP LaserJet 1020
[KERNEL] usb 1-8: Manufacturer: Hewlett-Packard
[KERNEL] usb 1-8: SerialNumber: FN003M8
[KERNEL] usb 1-8: usb_probe_device
[KERNEL] usb 1-8: configuration #1 chosen from 1 choice
[KERNEL] usb 1-8: adding 1-8:1.0 (config #1, interface 0)
[KERNEL] drivers/usb/core/inode.c: creating file '002'
[KERNEL] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
[KERNEL] Refined TSC clocksource calibration: 2499.940 MHz.
[KERNEL] Switching to clocksource tsc
[KERNEL] usb usb2: suspend_rh (auto-stop)
[KERNEL] usb usb3: suspend_rh (auto-stop)
[KERNEL] usb usb4: suspend_rh (auto-stop)
[KERNEL] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
[KERNEL] RAMDISK: lzo image found at block 0
[KERNEL] VFS: Mounted root (romfs filesystem) readonly on device 1:0.
[KERNEL] Freeing unused kernel memory: 292k freed
[KERNEL] usb usb5: suspend_rh (auto-stop)
[pfac] Ok, PID 419.
[initrd] WTware shell v.5.0.1
[initrd] PCIID: 8086:29c0 class 00 subclass 00.
[initrd] PCIID: 8086:29c2 class 00 subclass 00.
[initrd] PCIID: 8086:27d8 class 03 subclass 00.
[initrd] PCIID: 8086:27d0 class 04 subclass 00.
[initrd] PCIID: 8086:27d2 class 04 subclass 00.
[initrd] WARNING: multiple devices same type: 8086:27d2 and 8086:27d0. One of them will not work.
[initrd] PCIID: 8086:27c8 class 03 subclass 00.
[initrd] PCIID: 8086:27c9 class 03 subclass 00.
[initrd] PCIID: 8086:27ca class 03 subclass 00.
[initrd] PCIID: 8086:27cb class 03 subclass 00.
[initrd] PCIID: 8086:27cc class 03 subclass 20.
[initrd] PCIID: 8086:244e class 04 subclass 01.
[initrd] WARNING: multiple devices same type: 8086:244e and 8086:27d0. One of them will not work.
[initrd] PCIID: 8086:27b8 class 01 subclass 00.
[initrd] PCIID: 8086:27c0 class 01 subclass 80.
[initrd] PCIID: 8086:27da class 05 subclass 00.
[initrd] PCIID: 10ec:8168 class 00 subclass 00.
[initrd] PCIID, VGA: 8086:27d8.
[initrd] PCIID, second VGA: 8086:27cc.
[initrd] PCIID, sound: 8086:27d0.
/--- FILE "/proc/bus/usb/devices" -----------------------
| T: Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
| B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
| D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
| P: Vendor=1d6b ProdID=0001 Rev= 3.00
| S: Manufacturer=Linux 3.0.0 uhci_hcd
| S: Product=UHCI Host Controller
| S: SerialNumber=0000:00:1d.3
| C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
| I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
| E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
| T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
| B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
| D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
| P: Vendor=1d6b ProdID=0001 Rev= 3.00
| S: Manufacturer=Linux 3.0.0 uhci_hcd
| S: Product=UHCI Host Controller
| S: SerialNumber=0000:00:1d.2
| C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
| I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
| E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
| T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
| B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
| D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
| P: Vendor=1d6b ProdID=0001 Rev= 3.00
| S: Manufacturer=Linux 3.0.0 uhci_hcd
| S: Product=UHCI Host Controller
| S: SerialNumber=0000:00:1d.1
| C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
| I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
| E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
| T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
| B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
| D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
| P: Vendor=1d6b ProdID=0001 Rev= 3.00
| S: Manufacturer=Linux 3.0.0 uhci_hcd
| S: Product=UHCI Host Controller
| S: SerialNumber=0000:00:1d.0
| C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
| I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
| E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
| T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8
| B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
| D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
| P: Vendor=1d6b ProdID=0002 Rev= 3.00
| S: Manufacturer=Linux 3.0.0 ehci_hcd
| S: Product=EHCI Host Controller
| S: SerialNumber=0000:00:1d.7
| C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
| I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
| E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
| T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
| D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
| P: Vendor=03f0 ProdID=2b17 Rev= 1.00
| S: Manufacturer=Hewlett-Packard
| S: Product=HP LaserJet 1020
| S: SerialNumber=FN003M8
| C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 98mA
| I:* If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=(none)
| E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
| E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
\----------------------------------------------------
[initrd] Loading ethernet drivers.
[initrd] +--- Executing "/sbin/modprobe r8169"
[KERNEL] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[KERNEL] r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[KERNEL] r8169 0000:02:00.0: setting latency timer to 64
[KERNEL] r8169 0000:02:00.0: no MSI. Back to INTx.
[KERNEL] r8169 0000:02:00.0: eth0: RTL8168c/8111c at 0xf87ce000, 00:1f:d0:9b:5c:1e, XID 1c4000c0 IRQ 17
[initrd] +- Errorlevel: 0, output:
[initrd] +------------------------
[initrd] NIC module r8169.ko loaded.
[KERNEL] r8169 0000:02:00.0: eth0: link down
[KERNEL] r8169 0000:02:00.0: eth0: link down
[KERNEL] r8169 0000:02:00.0: eth0: link up
[initrd] dhcp: 372 bytes from 192.168.0.4.
[initrd] 00000000:000001600000000000110000c0a80004ffffffff004300440160000002010600
[initrd] 00000020:67458b6b0000000000000000c0a8021ac0a8036f00000000001fd09b5c1e0000
[initrd] 00000040:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 00000060:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 00000080:0000000000000000352e302e315c7774776172652e7078650000000000000000
[initrd] 000000a0:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 000000c0:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 000000e0:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 00000100:0000000000000000638253633501020104ffffe0003a04000038403b04000062
[initrd] 00000120:703304000070803604c0a800040304c0a800f70610c0a80004c0a800f7c0a800
[initrd] 00000140:06c0a81f010f09767368752e65647500420e3139322e3136382e332e31313100
[initrd] 00000160:4311352e302e315c7774776172652e70786500ff
[initrd] dhcp: 372 bytes from 192.168.0.4.
[initrd] 00000000:000001600000000000110000c0a80004ffffffff004300440160000002010600
[initrd] 00000020:67458b6b0000000000000000c0a8021ac0a8036f00000000001fd09b5c1e0000
[initrd] 00000040:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 00000060:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 00000080:0000000000000000352e302e315c7774776172652e7078650000000000000000
[initrd] 000000a0:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 000000c0:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 000000e0:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 00000100:0000000000000000638253633501053a04000038403b04000062703304000070
[initrd] 00000120:803604c0a800040104ffffe0000304c0a800f70610c0a80004c0a800f7c0a800
[initrd] 00000140:06c0a81f010f09767368752e65647500420e3139322e3136382e332e31313100
[initrd] 00000160:4311352e302e315c7774776172652e70786500ff
[initrd] dhcp: server address 192.168.0.4.
[initrd] dhcp: 192.168.2.26/255.255.224.0.
[initrd] dhcp: default gateway 192.168.0.247.
[initrd] dhcp: DNS 192.168.0.4.
[initrd] dhcp: DNS 192.168.0.247.
[initrd] dhcp: DNS 192.168.0.6.
[initrd] dhcp: DNS 192.168.31.1.
[initrd] dhcp: domain vshu.edu.
[initrd] dhcp: TFTP 192.168.3.111.
[initrd] dhcp: boot file (067) 5.0.1\wtware.pxe.
[initrd] TFTP binary "5.0.1\", configs prefix "", using "\" slash.
Send broadcast WTCU discover.
[initrd] WTware TFTP v.5.0.1.
[initrd] tftp: download file Everyone\list.wtc from 192.168.3.111.
/--- FILE "/tmp/list.wtc" -----------------------
| #
| # Ñïèñîê ïîäêëþ÷àåìûõ ôàéëîâ.
| #
| # Ýòîò îòäåëüíûé ìåõàíèçì íàñòðîéêè òåðìèíàëîâ ïðåäíàçíà÷åí òîëüêî
| # äëÿ ðó÷íîãî êîíôèãóðèðîâàíèÿ òåðìèíàëîâ. Ãðàôè÷åñêèé êîíôèãóðàòîð
| # íå ÷èòàåò list.wtc, íå ÷èòàåò è íå ïîçâîëÿåò ðåäàêòèðîâàòü ôàéëû
| # èç êàòàëîãà ListIncludes. Ïîýòîìó íåëüçÿ ïûòàòüñÿ íàñòðàèâàòü îäèí
| # è òîò æå òåðìèíàë è êîíôèãóðàòîðîì, è ÷åðåç list.wtc.
| #
| # Ôîðìàò ñòðîêè â ýòîì ôàéëå:
| #
| # 01.02.03.04.05.06[([èìÿïîëüçîâàòåëÿ@][èìÿòåðìèíàëà])] [ôàéë [ôàéë ...]]] [# êîììåíòàðèé]
| #
| # Ïðèìåðû:
| #
| # 02.03.04.05.06.07 file1
| #
| # Îçíà÷àåò, ÷òî òåðìèíàë ñ ìàê-àäðåñîì 02.03.04.05.06.07 ïðî÷èòàåò
| # ïàðàìåòðû èç ôàéëà ListIncludes/file1.
| #
| #
| # 03.04.05.06.07.08(vasja@) file2
| #
| # Îçíà÷àåò, ÷òî òåðìèíàë ñ ìàê-àäðåñîì 03.04.05.06.07.08 ïðî÷èòàåò
| # ïàðàìåòðû èç ôàéëà ListIncludes/file2 è â îêîøêî "Âõîä â Windows"
| # ïîäñòàâèò èìÿ ïîëüçîâàòåëÿ "vasja".
| #
| #
| # 04.05.06.07.08.09(term5) file6 file7 # Êîìï çàìãëàâáóõà.
| #
| # Îçíà÷àåò, ÷òî òåðìèíàëó ñ ìàê-àäðåñîì 04.05.06.07.08.09 áóäåò
| # ïðèñâîåíî èìÿ term5, àíàëîãè÷íî óêàçàíèþ ïàðàìåòðà clienthostname,
| # è îí ïðî÷èòàåò ïàðàìåòðû èç ôàéëîâ ListIncludes/file6 è
| # ListIncludes/file7.
| #
| #
| # ×òîáû ìîæíî áûëî óêàçûâàòü èìÿ ïîëüçîâàòåëÿ ðóññêèìè áóêâàìè, íàäî
| # îòêðûòü ýòîò ôàéë â Notepad è ñîõðàíèòü ñ Encoding: Unicode.
| #
\----------------------------------------------------
[initrd] tftp: download file Terminals\00.1F.D0.9B.5C.1E\config.wtc from 192.168.3.111.
/--- FILE "/tmp/config.wtc" -----------------------
| [BOM]
| video=VESA(F)
| resolution=1280x1024
| bpp=16
| user=vshu\dng
| keyboard=ru
| graphic=adg
| language=ru,default
| keyswitch=alt-shift
| shared_disk=floppy;cdrom;usb
| disk=usb
| timezone=
| shared_usb=off
| animation_speed=off
| mouse_accel_mult=4
| scanner=on
| printer=usb
| connection
\----------------------------------------------------
[initrd] tftp: download file Everyone\all.wtc from 192.168.3.111.
/--- FILE "/tmp/all.wtc" -----------------------
| server=192.168.3.111
\----------------------------------------------------
[initrd] tftp: download file Everyone\wtware.lic from 192.168.3.111.
/--- FILE "/etc/config.compiled" -----------------------
| [BOM]
| server=192.168.3.111
| video=VESA(F)
| resolution=1280x1024
| bpp=16
| user=vshu\dng
| keyboard=ru
| graphic=adg
| language=ru,default
| keyswitch=alt-shift
| shared_disk=floppy;cdrom;usb
| disk=usb
| timezone=
| shared_usb=off
| animation_speed=off
| mouse_accel_mult=4
| scanner=on
| printer=usb
| connection
\----------------------------------------------------
[initrd] Hostname: "wtw001FD09B5C1E".
Saned listener active.
RSHd listener active.
Everyone can control terminal by http.
[initrd] tftp: download and unpack file 5.0.1\packages\print from 192.168.3.111.
[initrd] Loading usb printer driver.
[initrd] +--- Executing "/sbin/modprobe usblp"
[KERNEL] usblp 1-8:1.0: usb_probe_interface
[KERNEL] usblp 1-8:1.0: usb_probe_interface - got id
[KERNEL] usblp 1-8:1.0: looking for a minor, starting at 0
[KERNEL] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17
[initrd] +- Errorlevel: 0, output:
[KERNEL] usbcore: registered new interface driver usblp
[pfac] Got command line /sbin/printer 0 11 0.
[initrd] +------------------------
[pfac] Ok, PID 438.
[initrd] tftp: download and unpack file 5.0.1\packages\f from 192.168.3.111.
[printer] Printserver, WTware v.5.0.1
[printer] Printserver 0, device /dev/lpUSB0, listen at port 9100.
[initrd] tftp: download and unpack file 5.0.1\packages\graphic from 192.168.3.111.
[gm] WTware session manager v.5.0.1.
[gm] New mode: 1280x1024, 16 bit, 0 Hz, modeline "", DDC enabled, connector 0.
[gm] Mouse PnP: IMPS2 or EXPPS2?
[gm] Mouse PnP: EXPPS2.
[gm] Call _emulate ().
[gm] VBE Version 3.0.
[gm] VBE modelist at 0x00011050.
[gm] Mode 316: 1920x1440 (256 color palette) linelength 1920 bits 8.
[gm] Mode 333: 1920x1440 (5:6:5) linelength 3840 bits 16.
[gm] Mode 314: 1600x1200 (256 color palette) linelength 1600 bits 8.
[gm] Mode 331: 1600x1200 (5:6:5) linelength 3200 bits 16.
[gm] Mode 346: 1600x1200 (8:8:8) linelength 6400 bits 32.
[gm] Mode 263: 1280x1024 (256 color palette) linelength 1280 bits 8.
[gm] Mode 282: 1280x1024 (5:6:5) linelength 2560 bits 16.
[gm] Use mode 282.
[gm] Mode 283: 1280x1024 (8:8:8) linelength 5120 bits 32.
[gm] Mode 261: 1024x768 (256 color palette) linelength 1024 bits 8.
[gm] Mode 279: 1024x768 (5:6:5) linelength 2048 bits 16.
[gm] Mode 280: 1024x768 (8:8:8) linelength 4096 bits 32.
[gm] Mode 274: 640x480 (8:8:8) linelength 2560 bits 32.
[gm] Mode 276: 800x600 (5:6:5) linelength 1600 bits 16.
[gm] Mode 277: 800x600 (8:8:8) linelength 3200 bits 32.
[gm] Mode 257: 640x480 (256 color palette) linelength 640 bits 8.
[gm] Mode 259: 800x600 (256 color palette) linelength 832 bits 8.
[gm] Mode 273: 640x480 (5:6:5) linelength 1280 bits 16.
[gm] Linear framebuffer.
[gm] mmap () return 0xb73f9000. Touch video memory.
[gm] Ok.
[gm] WTware TFTP v.5.0.1.
[gm] tftp: download and unpack file 5.0.1\packages\samba from 192.168.3.111.
[gm] Loading ISO 9660 and UDF CDROM filesystem drivers.
[gm] +--- Executing "/sbin/modprobe udf"
[gm] +- Errorlevel: 0, output:
[gm] +------------------------
[gm] +--- Executing "/sbin/modprobe isofs"
[gm] +- Errorlevel: 0, output:
[gm] +------------------------
[gm] Loading UTF8 charset.
[gm] +--- Executing "/sbin/modprobe nls_cp437"
[gm] +- Errorlevel: 0, output:
[gm] +------------------------
[gm] +--- Executing "/sbin/modprobe nls_utf8"
[gm] +- Errorlevel: 0, output:
[gm] +------------------------
[gm] Loading VFAT filesystem driver.
[gm] +--- Executing "/sbin/modprobe fat"
[gm] +- Errorlevel: 0, output:
[gm] +------------------------
[gm] +--- Executing "/sbin/modprobe vfat"
[gm] +- Errorlevel: 0, output:
[gm] +------------------------
[gm] +--- Executing "/sbin/modprobe ntfs"
[gm] +- Errorlevel: 0, output:
[KERNEL] NTFS driver 2.1.30 [Flags: R/O MODULE].
[gm] +------------------------
[gm] Loading IDE bus driver.
[gm] +--- Executing "/sbin/modprobe libata dma=2"
[KERNEL] SCSI subsystem initialized
[gm] +- Errorlevel: 0, output:
[KERNEL] libata version 3.00 loaded.
[gm] +------------------------
[gm] +--- Executing "/sbin/modprobe ata_piix"
[KERNEL] ata_piix 0000:00:1f.2: version 2.13
[KERNEL] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[KERNEL] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[KERNEL] ata_piix 0000:00:1f.2: setting latency timer to 64
[KERNEL] scsi0 : ata_piix
[KERNEL] scsi1 : ata_piix
[KERNEL] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[KERNEL] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[KERNEL] ata2.00: ATAPI: Optiarc DVD RW AD-7203A, 1.05, max UDMA/66
[KERNEL] ata2.00: configured for UDMA/66
[KERNEL] ata1.00: HPA detected: current 625140335, native 625142448
[KERNEL] ata1.00: ATA-8: ST3320613AS, CC2F, max UDMA/133
[KERNEL] ata1.00: 625140335 sectors, multi 16: LBA48 NCQ (depth 0/32)
[KERNEL] ata1.00: configured for PIO4
[KERNEL] scsi 0:0:0:0: Direct-Access ATA ST3320613AS CC2F PQ: 0 ANSI: 5
[KERNEL] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7203A 1.05 PQ: 0 ANSI: 5
[gm] +- Errorlevel: 0, output:
[gm] +------------------------
[gm] ATA module ata_piix.ko loaded.
[gm] Loading cdrom driver.
[gm] +--- Executing "/sbin/modprobe usb-storage"
[KERNEL] Initializing USB Mass Storage driver...
[gm] +- Errorlevel: 0, output:
[KERNEL] usbcore: registered new interface driver usb-storage
[KERNEL] USB Mass Storage support registered.
[gm] +------------------------
[gm] +--- Executing "/sbin/modprobe sr_mod"
[KERNEL] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[KERNEL] cdrom: Uniform CD-ROM driver Revision: 3.20
[KERNEL] sr 1:0:0:0: Attached scsi CD-ROM sr0
[hotplug] Block device 11:0. No action.
[gm] +- Errorlevel: 0, output:
[gm] +------------------------
[gm] Loading usb storage driver.
[gm] +--- Executing "/sbin/modprobe scsi_mod"
[gm] +- Errorlevel: 0, output:
[gm] +------------------------
[gm] +--- Executing "/sbin/modprobe usb-storage"
[gm] +- Errorlevel: 0, output:
[gm] +------------------------
[gm] +--- Executing "/sbin/modprobe sd_mod"
[hotplug] Block device 11:0. No action.
[KERNEL] sd 0:0:0:0: [sda] 625140335 512-byte logical blocks: (320 GB/298 GiB)
[KERNEL] sd 0:0:0:0: [sda] Write Protect is off
[KERNEL] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[KERNEL] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[KERNEL] sda: sda1 sda2 < sda5 >
[gm] +- Errorlevel: 0, output:
[KERNEL] sd 0:0:0:0: [sda] Attached SCSI disk
[gm] +------------------------
[gm] Loading floppy driver.
[gm] +--- Executing "/sbin/modprobe floppy"
[KERNEL] Floppy drive(s): fd0 is 1.44M
[KERNEL] FDC 0 is a post-1991 82077
[gm] +- Errorlevel: 0, output:
[gm] +------------------------
[gm] tftp: download and unpack file 5.0.1\packages\scan from 192.168.3.111.
[hotplug] Block device 2:0. No action.
[pfac] Got command line /sbin/resolver 0 dns [192.168.3.111].
[pfac] Ok, PID 516.
[pfac] Process pid 516 terminated, status 00000000.
[gm] 192.168.3.111 => 192.168.3.111.
[gm] Free ram before fork terminal client /sbin/rdpclient (session 1): 878732 Kb.
[pfac] Got command line /sbin/rdpclient 1.
[pfac] Ok, PID 517.
[rdpclient 517] RDP Terminal Client, WTware v.5.0.1, pipe 1, pid 517.
[rdpclient 517] Add RDPDR channel.
[rdpclient 517] Add WTVC WTware control channel.
[rdpclient 517] Make RDP session with 192.168.3.111:3389.
[rdpclient 517] Username: "dng".
[rdpclient 517] No password.
[rdpclient 517] Domain: "vshu".
[rdpclient 517] No shell.
[rdpclient 517] No directory.
[rdpclient 517] Window: 1280x1024@16.
[rdpclient 517] PFlags 0x00000166.
[rdpclient 517] Keyboard 00000419:00000000.
[rdpclient 517] My hostname "wtw001FD09B5C1E".
[rdpclient 517] TCP: connecting to 192.168.3.111:3389.
[rdpclient 517] TCP: connection with 192.168.3.111:3389 established.
[rdpclient 517] Turn keepalive on.
[rdpclient 517] Free ram after buffers allocation: 875252 KB.
[rdpclient 517] RDP5 encryption (X.509).
[rdpclient 517] RC4 key 128 bit.
[rdpclient 517] Got PDUTYPE2_SET_ERROR_INFO_PDU with errorInfo 0x00000000.
[rdpclient 517] No additional information is available.
[rdpclient 517] SessionId 0x00000010: VSHU\dng.
Send WTCU discover to 192.168.0.78.
Send WTCU discover to 192.168.0.78.
[printer] First connection to printserver, device /dev/lpUSB0.
[printer] Printer USB ID 03f0:2b17
[KERNEL] usb 1-8: printer timed out on ep0in len=0/1
Send WTCU discover to 192.168.0.78.
Send WTCU discover to 192.168.0.78.
Connection from wtc.exe at 192.168.0.78.
Вот лог:
WTware 5.0.1 supervisor.
WTC listener active.
WTC broadcast listener active.
HTTPd listener active.
[KERNEL (unsync)] .0.0 (root@compiler) (gcc version 4.5.2 (Buildroot 2011.05-git) ) #1 PREEMPT Tue Aug 2 01:39:00 UTC 2011
[KERNEL] KERNEL supported cpus:
[KERNEL] Intel GenuineIntel
[KERNEL] AMD AuthenticAMD
[KERNEL] NSC Geode by NSC
[KERNEL] Cyrix CyrixInstead
[KERNEL] Centaur CentaurHauls
[KERNEL] Transmeta GenuineTMx86
[KERNEL] Transmeta TransmetaCPU
[KERNEL] UMC UMC UMC UMC
[KERNEL] BIOS-provided physical RAM map:
[KERNEL] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[KERNEL] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[KERNEL] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[KERNEL] BIOS-e820: 0000000000100000 - 000000007f5e0000 (usable)
[KERNEL] BIOS-e820: 000000007f5e0000 - 000000007f5e3000 (ACPI NVS)
[KERNEL] BIOS-e820: 000000007f5e3000 - 000000007f5f0000 (ACPI data)
[KERNEL] BIOS-e820: 000000007f5f0000 - 000000007f600000 (reserved)
[KERNEL] BIOS-e820: 00000000c0000000 - 00000000d0000000 (reserved)
[KERNEL] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[KERNEL] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[KERNEL] DMI 2.4 present.
[KERNEL] DMI: Gigabyte Technology Co., Ltd. EG31M-S2/EG31M-S2, BIOS FA 07/25/2008
[KERNEL] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[KERNEL] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[KERNEL] last_pfn = 0x7f5e0 max_arch_pfn = 0x100000
[KERNEL] MTRR default type: uncachable
[KERNEL] MTRR fixed ranges enabled:
[KERNEL] 00000-9FFFF write-back
[KERNEL] A0000-BFFFF uncachable
[KERNEL] C0000-CAFFF write-protect
[KERNEL] CB000-EFFFF uncachable
[KERNEL] F0000-FFFFF write-through
[KERNEL] MTRR variable ranges enabled:
[KERNEL] 0 base 000000000 mask F80000000 write-back
[KERNEL] 1 base 07F800000 mask FFF800000 uncachable
[KERNEL] 2 base 07F700000 mask FFFF00000 uncachable
[KERNEL] 3 base 07F600000 mask FFFF00000 uncachable
[KERNEL] 4 disabled
[KERNEL] 5 disabled
[KERNEL] 6 disabled
[KERNEL] 7 disabled
[KERNEL] Warning only 895MB will be used.
[KERNEL] Use a HIGHMEM enabled kernel.
[KERNEL] initial memory mapped : 0 - 00800000
[KERNEL] Base memory trampoline at [c009b000] 9b000 size 12288
[KERNEL] init_memory_mapping: 0000000000000000-0000000037fa0000
[KERNEL] 0000000000 - 0000400000 page 4k
[KERNEL] 0000400000 - 0037c00000 page 2M
[KERNEL] 0037c00000 - 0037fa0000 page 4k
[KERNEL] kernel direct mapping tables up to 37fa0000 @ 7fb000-800000
[KERNEL] early_memtest: # of tests: 1
[KERNEL] 0000010000 - 000009b000 pattern 0000000000000000
[KERNEL] 000009e000 - 000009e400 pattern 0000000000000000
[KERNEL] 000041d0f6 - 00007fb000 pattern 0000000000000000
[KERNEL] 00007fc000 - 0037fa0000 pattern 0000000000000000
[KERNEL] RAMDISK: 7f1ea000 - 7f5bf000
[KERNEL] Allocated new RAMDISK: 37bcb000 - 37f9fe04
[KERNEL] Move RAMDISK from 000000007f1ea000 - 000000007f5bee03 to 37bcb000 - 37f9fe03
[KERNEL] ACPI: RSDP 000f6be0 00014 (v00 GBT )
[KERNEL] ACPI: RSDT 7f5e3040 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[KERNEL] ACPI: FACP 7f5e30c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[KERNEL] ACPI: DSDT 7f5e3180 04363 (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
[KERNEL] ACPI: FACS 7f5e0000 00040
[KERNEL] ACPI: HPET 7f5e7640 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[KERNEL] ACPI: MCFG 7f5e76c0 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[KERNEL] ACPI: APIC 7f5e7540 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[KERNEL] ACPI: SSDT 7f5e7d60 003AB (v01 PmRef CpuPm 00003000 INTL 20040311)
[KERNEL] ACPI: Local APIC address 0xfee00000
[KERNEL] 895MB LOWMEM available.
[KERNEL] mapped low ram: 0 - 37fa0000
[KERNEL] low ram: 0 - 37fa0000
[KERNEL] Zone PFN ranges:
[KERNEL] DMA 0x00000010 -> 0x00001000
[KERNEL] Normal 0x00001000 -> 0x00037fa0
[KERNEL] Movable zone start PFN for each node
[KERNEL] early_node_map[2] active PFN ranges
[KERNEL] 0: 0x00000010 -> 0x0000009f
[KERNEL] 0: 0x00000100 -> 0x00037fa0
[KERNEL] On node 0 totalpages: 229167
[KERNEL] free_area_init_node: node 0, pgdat c03b0e60, node_mem_map f74cb200
[KERNEL] DMA zone: 32 pages used for memmap
[KERNEL] DMA zone: 0 pages reserved
[KERNEL] DMA zone: 3951 pages, LIFO batch:0
[KERNEL] Normal zone: 1760 pages used for memmap
[KERNEL] Normal zone: 223424 pages, LIFO batch:31
[KERNEL] Using APIC driver default
[KERNEL] ACPI: PM-Timer IO Port: 0x408
[KERNEL] ACPI: Local APIC address 0xfee00000
[KERNEL] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[KERNEL] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[KERNEL] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 1/0x1 ignored.
[KERNEL] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[KERNEL] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[KERNEL] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[KERNEL] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[KERNEL] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[KERNEL] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[KERNEL] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[KERNEL] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[KERNEL] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[KERNEL] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[KERNEL] ACPI: IRQ0 used by override.
[KERNEL] ACPI: IRQ2 used by override.
[KERNEL] ACPI: IRQ9 used by override.
[KERNEL] Using ACPI (MADT) for SMP configuration information
[KERNEL] nr_irqs_gsi: 40
[KERNEL] Allocating PCI resources starting at 7f600000 (gap: 7f600000:40a00000)
[KERNEL] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[KERNEL] pcpu-alloc: [0] 0
[KERNEL] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227375
[KERNEL] Kernel command line: root=/dev/ram0 ramdisk_blocksize=4096 ramdisk_size=8192 memtest=1 quiet initrd=packages/initrd BOOT_IMAGE=packages/kernel
[KERNEL] PID hash table entries: 4096 (order: 2, 16384 bytes)
[KERNEL] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[KERNEL] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[KERNEL] Initializing CPU#0
[KERNEL] Memory: 901532k/917120k available (2179k kernel code, 15136k reserved, 586k data, 292k init, 0k highmem)
[KERNEL] virtual kernel memory layout:
[KERNEL] fixmap : 0xfffa2000 - 0xfffff000 ( 372 kB)
[KERNEL] vmalloc : 0xf87a0000 - 0xfffa0000 ( 120 MB)
[KERNEL] lowmem : 0xc0000000 - 0xf7fa0000 ( 895 MB)
[KERNEL] .init : 0xc03b4000 - 0xc03fd000 ( 292 kB)
[KERNEL] .data : 0xc0320c9b - 0xc03b35c0 ( 586 kB)
[KERNEL] .text : 0xc0100000 - 0xc0320c9b (2179 kB)
[KERNEL] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[KERNEL] NR_IRQS:288
[KERNEL] CPU 0 irqstacks, hard=f6c08000 soft=f6c0a000
[KERNEL] Console: colour VGA+ 80x25
[KERNEL] console [tty0] enabled
[KERNEL] Fast TSC calibration using PIT
[KERNEL] Detected 2500.298 MHz processor.
[KERNEL] Calibrating delay loop (skipped), value calculated using timer frequency.. 5000.59 BogoMIPS (lpj=2500298)
[KERNEL] pid_max: default: 32768 minimum: 301
[KERNEL] Mount-cache hash table entries: 512
[KERNEL] using mwait in idle threads.
[KERNEL] CPU: Intel Pentium(R) Dual-Core CPU E5200 @ 2.50GHz stepping 06
[KERNEL] ACPI: Core revision 20110413
[KERNEL] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[KERNEL] ... version: 2
[KERNEL] ... bit width: 40
[KERNEL] ... generic registers: 2
[KERNEL] ... value mask: 000000ffffffffff
[KERNEL] ... max period: 000000007fffffff
[KERNEL] ... fixed-purpose events: 3
[KERNEL] ... event mask: 0000000700000003
[KERNEL] Enabling APIC mode: Flat. Using 1 I/O APICs
[KERNEL] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[KERNEL] NET: Registered protocol family 16
[KERNEL] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[KERNEL] ACPI: bus type pci registered
[KERNEL] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000)
[KERNEL] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved in E820
[KERNEL] PCI: Using MMCONFIG for extended config space
[KERNEL] PCI: Using configuration type 1 for base access
[KERNEL] bio: create slab <bio-0> at 0
[KERNEL] ACPI: EC: Look up EC in DSDT
[KERNEL] ACPI: SSDT 7f5e7740 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
[KERNEL] ACPI: Dynamic OEM Table Load:
[KERNEL] ACPI: SSDT (null) 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
[KERNEL] ACPI: Interpreter enabled
[KERNEL] ACPI: (supports S0 S3 S5)
[KERNEL] ACPI: Using IOAPIC for interrupt routing
[KERNEL] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[KERNEL] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[KERNEL] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[KERNEL] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[KERNEL] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[KERNEL] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[KERNEL] pci_root PNP0A03:00: host bridge window [mem 0x7f600000-0xfebfffff]
[KERNEL] pci 0000:00:00.0: [8086:29c0] type 0 class 0x000600
[KERNEL] pci 0000:00:02.0: [8086:29c2] type 0 class 0x000300
[KERNEL] pci 0000:00:02.0: reg 10: [mem 0xe1200000-0xe127ffff]
[KERNEL] pci 0000:00:02.0: reg 14: [io 0xe000-0xe007]
[KERNEL] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
[KERNEL] pci 0000:00:02.0: reg 1c: [mem 0xe1000000-0xe10fffff]
[KERNEL] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[KERNEL] pci 0000:00:1b.0: reg 10: [mem 0xe1280000-0xe1283fff 64bit]
[KERNEL] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[KERNEL] pci 0000:00:1b.0: PME# disabled
[KERNEL] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[KERNEL] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[KERNEL] pci 0000:00:1c.0: PME# disabled
[KERNEL] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
[KERNEL] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[KERNEL] pci 0000:00:1c.1: PME# disabled
[KERNEL] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[KERNEL] pci 0000:00:1d.0: reg 20: [io 0xe100-0xe11f]
[KERNEL] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[KERNEL] pci 0000:00:1d.1: reg 20: [io 0xe200-0xe21f]
[KERNEL] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[KERNEL] pci 0000:00:1d.2: reg 20: [io 0xe300-0xe31f]
[KERNEL] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[KERNEL] pci 0000:00:1d.3: reg 20: [io 0xe400-0xe41f]
[KERNEL] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[KERNEL] pci 0000:00:1d.7: reg 10: [mem 0xe1284000-0xe12843ff]
[KERNEL] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[KERNEL] pci 0000:00:1f.0: [8086:27b8] type 0 class 0x000601
[KERNEL] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[KERNEL] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[KERNEL] pci 0000:00:1f.2: [8086:27c0] type 0 class 0x000101
[KERNEL] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007]
[KERNEL] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003]
[KERNEL] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007]
[KERNEL] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003]
[KERNEL] pci 0000:00:1f.2: reg 20: [io 0xf000-0xf00f]
[KERNEL] pci 0000:00:1f.2: PME# supported from D3hot
[KERNEL] pci 0000:00:1f.2: PME# disabled
[KERNEL] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
[KERNEL] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
[KERNEL] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[KERNEL] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
[KERNEL] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[KERNEL] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[KERNEL] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
[KERNEL] pci 0000:02:00.0: reg 10: [io 0xd000-0xd0ff]
[KERNEL] pci 0000:02:00.0: reg 18: [mem 0xe1110000-0xe1110fff 64bit pref]
[KERNEL] pci 0000:02:00.0: reg 20: [mem 0xe1100000-0xe110ffff 64bit pref]
[KERNEL] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[KERNEL] pci 0000:02:00.0: supports D1 D2
[KERNEL] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[KERNEL] pci 0000:02:00.0: PME# disabled
[KERNEL] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[KERNEL] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
[KERNEL] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe0ffffff]
[KERNEL] pci 0000:00:1c.1: bridge window [mem 0xe1100000-0xe11fffff 64bit pref]
[KERNEL] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[KERNEL] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff]
[KERNEL] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[KERNEL] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[KERNEL] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[KERNEL] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[KERNEL] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[KERNEL] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[KERNEL] pci 0000:00:1e.0: bridge window [mem 0x7f600000-0xfebfffff] (subtractive decode)
[KERNEL] pci_bus 0000:00: on NUMA node 0
[KERNEL] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[KERNEL] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[KERNEL] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[KERNEL] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[KERNEL] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x09)
[KERNEL] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[KERNEL] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[KERNEL] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[KERNEL] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[KERNEL] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[KERNEL] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[KERNEL] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[KERNEL] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[KERNEL] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[KERNEL] vgaarb: loaded
[KERNEL] vgaarb: bridge control possible 0000:00:02.0
[KERNEL] usbcore: registered new interface driver usbfs
[KERNEL] usbcore: registered new interface driver hub
[KERNEL] usbcore: registered new device driver usb
[KERNEL] PCI: Using ACPI for IRQ routing
[KERNEL] PCI: pci_cache_line_size set to 64 bytes
[KERNEL] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[KERNEL] reserve RAM buffer: 000000007f5e0000 - 000000007fffffff
[KERNEL] pnp: PnP ACPI init
[KERNEL] ACPI: bus type pnp registered
[KERNEL] pnp 00:00: [bus 00-ff]
[KERNEL] pnp 00:00: [io 0x0cf8-0x0cff]
[KERNEL] pnp 00:00: [io 0x0000-0x0cf7 window]
[KERNEL] pnp 00:00: [io 0x0d00-0xffff window]
[KERNEL] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[KERNEL] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[KERNEL] pnp 00:00: [mem 0x7f600000-0xfebfffff window]
[KERNEL] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[KERNEL] pnp 00:01: [io 0x0010-0x001f]
[KERNEL] pnp 00:01: [io 0x0022-0x003f]
[KERNEL] pnp 00:01: [io 0x0044-0x005f]
[KERNEL] pnp 00:01: [io 0x0062-0x0063]
[KERNEL] pnp 00:01: [io 0x0065-0x006f]
[KERNEL] pnp 00:01: [io 0x0074-0x007f]
[KERNEL] pnp 00:01: [io 0x0091-0x0093]
[KERNEL] pnp 00:01: [io 0x00a2-0x00bf]
[KERNEL] pnp 00:01: [io 0x00e0-0x00ef]
[KERNEL] pnp 00:01: [io 0x04d0-0x04d1]
[KERNEL] pnp 00:01: [io 0x0290-0x029f]
[KERNEL] pnp 00:01: [io 0x0800-0x087f]
[KERNEL] pnp 00:01: [io 0x0290-0x0294]
[KERNEL] pnp 00:01: [io 0x0880-0x088f]
[KERNEL] system 00:01: [io 0x04d0-0x04d1] has been reserved
[KERNEL] system 00:01: [io 0x0290-0x029f] has been reserved
[KERNEL] system 00:01: [io 0x0800-0x087f] has been reserved
[KERNEL] system 00:01: [io 0x0290-0x0294] has been reserved
[KERNEL] system 00:01: [io 0x0880-0x088f] has been reserved
[KERNEL] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[KERNEL] pnp 00:02: [dma 4]
[KERNEL] pnp 00:02: [io 0x0000-0x000f]
[KERNEL] pnp 00:02: [io 0x0080-0x0090]
[KERNEL] pnp 00:02: [io 0x0094-0x009f]
[KERNEL] pnp 00:02: [io 0x00c0-0x00df]
[KERNEL] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[KERNEL] pnp 00:03: [irq 0 disabled]
[KERNEL] pnp 00:03: [irq 8]
[KERNEL] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[KERNEL] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[KERNEL] pnp 00:04: [io 0x0070-0x0073]
[KERNEL] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[KERNEL] pnp 00:05: [io 0x0061]
[KERNEL] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[KERNEL] pnp 00:06: [io 0x00f0-0x00ff]
[KERNEL] pnp 00:06: [irq 13]
[KERNEL] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[KERNEL] pnp 00:07: [io 0x03f0-0x03f5]
[KERNEL] pnp 00:07: [io 0x03f7]
[KERNEL] pnp 00:07: [irq 6]
[KERNEL] pnp 00:07: [dma 2]
[KERNEL] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[KERNEL] pnp 00:08: [io 0x03f8-0x03ff]
[KERNEL] pnp 00:08: [irq 4]
[KERNEL] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[KERNEL] pnp 00:09: [io 0x02f8-0x02ff]
[KERNEL] pnp 00:09: [irq 3]
[KERNEL] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[KERNEL] pnp 00:0a: [io 0x0378-0x037f]
[KERNEL] pnp 00:0a: [irq 7]
[KERNEL] pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active)
[KERNEL] pnp 00:0b: [irq 12]
[KERNEL] pnp 00:0b: Plug and Play ACPI device, IDs PNP0f13 (active)
[KERNEL] pnp 00:0c: [io 0x0060]
[KERNEL] pnp 00:0c: [io 0x0064]
[KERNEL] pnp 00:0c: [irq 1]
[KERNEL] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 (active)
[KERNEL] pnp 00:0d: [io 0x0400-0x04bf]
[KERNEL] system 00:0d: [io 0x0400-0x04bf] has been reserved
[KERNEL] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[KERNEL] pnp 00:0e: [mem 0xc0000000-0xcfffffff]
[KERNEL] system 00:0e: [mem 0xc0000000-0xcfffffff] has been reserved
[KERNEL] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
[KERNEL] pnp 00:0f: [mem 0x000cd000-0x000cffff]
[KERNEL] pnp 00:0f: [mem 0x000f0000-0x000f7fff]
[KERNEL] pnp 00:0f: [mem 0x000f8000-0x000fbfff]
[KERNEL] pnp 00:0f: [mem 0x000fc000-0x000fffff]
[KERNEL] pnp 00:0f: [mem 0x7f5e0000-0x7f5fffff]
[KERNEL] pnp 00:0f: [mem 0x00000000-0x0009ffff]
[KERNEL] pnp 00:0f: [mem 0x00100000-0x7f5dffff]
[KERNEL] pnp 00:0f: [mem 0xfec00000-0xfec00fff]
[KERNEL] pnp 00:0f: [mem 0xfed13000-0xfed1dfff]
[KERNEL] pnp 00:0f: [mem 0xfed20000-0xfed8ffff]
[KERNEL] pnp 00:0f: [mem 0xfee00000-0xfee00fff]
[KERNEL] pnp 00:0f: [mem 0xffb00000-0xffb7ffff]
[KERNEL] pnp 00:0f: [mem 0xfff00000-0xffffffff]
[KERNEL] pnp 00:0f: [mem 0x000e0000-0x000effff]
[KERNEL] system 00:0f: [mem 0x000cd000-0x000cffff] has been reserved
[KERNEL] system 00:0f: [mem 0x000f0000-0x000f7fff] could not be reserved
[KERNEL] system 00:0f: [mem 0x000f8000-0x000fbfff] could not be reserved
[KERNEL] system 00:0f: [mem 0x000fc000-0x000fffff] could not be reserved
[KERNEL] system 00:0f: [mem 0x7f5e0000-0x7f5fffff] could not be reserved
[KERNEL] system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
[KERNEL] system 00:0f: [mem 0x00100000-0x7f5dffff] could not be reserved
[KERNEL] system 00:0f: [mem 0xfec00000-0xfec00fff] could not be reserved
[KERNEL] system 00:0f: [mem 0xfed13000-0xfed1dfff] has been reserved
[KERNEL] system 00:0f: [mem 0xfed20000-0xfed8ffff] has been reserved
[KERNEL] system 00:0f: [mem 0xfee00000-0xfee00fff] has been reserved
[KERNEL] system 00:0f: [mem 0xffb00000-0xffb7ffff] has been reserved
[KERNEL] system 00:0f: [mem 0xfff00000-0xffffffff] has been reserved
[KERNEL] system 00:0f: [mem 0x000e0000-0x000effff] has been reserved
[KERNEL] system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
[KERNEL] pnp 00:10: [mem 0xffb80000-0xffbfffff]
[KERNEL] pnp 00:10: Plug and Play ACPI device, IDs INT0800 (active)
[KERNEL] pnp: PnP ACPI: found 17 devices
[KERNEL] ACPI: ACPI bus type pnp unregistered
[KERNEL] Switching to clocksource acpi_pm
[KERNEL] PCI: max bus depth: 1 pci_try_num: 2
[KERNEL] pci 0000:00:1c.0: BAR 8: assigned [mem 0x7f600000-0x7f7fffff]
[KERNEL] pci 0000:00:1c.0: BAR 9: assigned [mem 0x7f800000-0x7f9fffff 64bit pref]
[KERNEL] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[KERNEL] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
[KERNEL] pci 0000:00:1c.0: bridge window [mem 0x7f600000-0x7f7fffff]
[KERNEL] pci 0000:00:1c.0: bridge window [mem 0x7f800000-0x7f9fffff 64bit pref]
[KERNEL] pci 0000:02:00.0: BAR 6: assigned [mem 0xe1120000-0xe112ffff pref]
[KERNEL] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[KERNEL] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
[KERNEL] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe0ffffff]
[KERNEL] pci 0000:00:1c.1: bridge window [mem 0xe1100000-0xe11fffff 64bit pref]
[KERNEL] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[KERNEL] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff]
[KERNEL] pci 0000:00:1e.0: bridge window [mem disabled]
[KERNEL] pci 0000:00:1e.0: bridge window [mem pref disabled]
[KERNEL] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[KERNEL] pci 0000:00:1c.0: setting latency timer to 64
[KERNEL] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[KERNEL] pci 0000:00:1c.1: setting latency timer to 64
[KERNEL] pci 0000:00:1e.0: setting latency timer to 64
[KERNEL] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[KERNEL] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[KERNEL] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[KERNEL] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[KERNEL] pci_bus 0000:00: resource 8 [mem 0x7f600000-0xfebfffff]
[KERNEL] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[KERNEL] pci_bus 0000:01: resource 1 [mem 0x7f600000-0x7f7fffff]
[KERNEL] pci_bus 0000:01: resource 2 [mem 0x7f800000-0x7f9fffff 64bit pref]
[KERNEL] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[KERNEL] pci_bus 0000:02: resource 1 [mem 0xe0000000-0xe0ffffff]
[KERNEL] pci_bus 0000:02: resource 2 [mem 0xe1100000-0xe11fffff 64bit pref]
[KERNEL] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
[KERNEL] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[KERNEL] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[KERNEL] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[KERNEL] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
[KERNEL] pci_bus 0000:03: resource 8 [mem 0x7f600000-0xfebfffff]
[KERNEL] NET: Registered protocol family 2
[KERNEL] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[KERNEL] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[KERNEL] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[KERNEL] TCP: Hash tables configured (established 131072 bind 65536)
[KERNEL] TCP reno registered
[KERNEL] UDP hash table entries: 512 (order: 1, 8192 bytes)
[KERNEL] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
[KERNEL] NET: Registered protocol family 1
[KERNEL] pci 0000:00:02.0: Boot video device
[KERNEL] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x2f00
[KERNEL] pci 0000:00:1d.0: Performing full reset
[KERNEL] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x2000
[KERNEL] pci 0000:00:1d.1: Performing full reset
[KERNEL] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x2000
[KERNEL] pci 0000:00:1d.2: Performing full reset
[KERNEL] pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x2000
[KERNEL] pci 0000:00:1d.3: Performing full reset
[KERNEL] PCI: CLS 32 bytes, default 64
[KERNEL] Freeing initrd memory: 3924k freed
[KERNEL] ROMFS MTD (C) 2007 Red Hat, Inc.
[KERNEL] msgmni has been set to 1768
[KERNEL] io scheduler noop registered
[KERNEL] io scheduler cfq registered (default)
[KERNEL] pcieport 0000:00:1c.0: setting latency timer to 64
[KERNEL] pcieport 0000:00:1c.1: setting latency timer to 64
[KERNEL] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[KERNEL] ACPI: Power Button [PWRB]
[KERNEL] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[KERNEL] ACPI: Power Button [PWRF]
[KERNEL] ACPI: acpi_idle registered with cpuidle
[KERNEL] brd: module loaded
[KERNEL] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[KERNEL] ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96
[KERNEL] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[KERNEL] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[KERNEL] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[KERNEL] drivers/usb/core/inode.c: creating file 'devices'
[KERNEL] drivers/usb/core/inode.c: creating file '001'
[KERNEL] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[KERNEL] ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8
[KERNEL] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
[KERNEL] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[KERNEL] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[KERNEL] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[KERNEL] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
[KERNEL] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe1284000
[KERNEL] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[KERNEL] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[KERNEL] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[KERNEL] usb usb1: default language 0x0409
[KERNEL] usb usb1: udev 1, busnum 1, minor = 0
[KERNEL] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[KERNEL] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[KERNEL] usb usb1: Product: EHCI Host Controller
[KERNEL] usb usb1: Manufacturer: Linux 3.0.0 ehci_hcd
[KERNEL] usb usb1: SerialNumber: 0000:00:1d.7
[KERNEL] usb usb1: usb_probe_device
[KERNEL] usb usb1: configuration #1 chosen from 1 choice
[KERNEL] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[KERNEL] hub 1-0:1.0: usb_probe_interface
[KERNEL] hub 1-0:1.0: usb_probe_interface - got id
[KERNEL] hub 1-0:1.0: USB hub found
[KERNEL] hub 1-0:1.0: 8 ports detected
[KERNEL] hub 1-0:1.0: standalone hub
[KERNEL] hub 1-0:1.0: no power switching (usb 1.0)
[KERNEL] hub 1-0:1.0: individual port over-current protection
[KERNEL] hub 1-0:1.0: power on to power good time: 20ms
[KERNEL] hub 1-0:1.0: local power source is good
[KERNEL] hub 1-0:1.0: trying to enable port power on non-switchable hub
[KERNEL] drivers/usb/core/inode.c: creating file '001'
[KERNEL] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[KERNEL] ohci_hcd: block sizes: ed 64 td 64
[KERNEL] uhci_hcd: USB Universal Host Controller Interface driver
[KERNEL] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[KERNEL] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[KERNEL] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[KERNEL] drivers/usb/core/inode.c: creating file '002'
[KERNEL] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[KERNEL] uhci_hcd 0000:00:1d.0: detected 2 ports
[KERNEL] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
[KERNEL] uhci_hcd 0000:00:1d.0: Performing full reset
[KERNEL] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
[KERNEL] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e100
[KERNEL] usb usb2: default language 0x0409
[KERNEL] usb usb2: udev 1, busnum 2, minor = 128
[KERNEL] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[KERNEL] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[KERNEL] usb usb2: Product: UHCI Host Controller
[KERNEL] usb usb2: Manufacturer: Linux 3.0.0 uhci_hcd
[KERNEL] usb usb2: SerialNumber: 0000:00:1d.0
[KERNEL] usb usb2: usb_probe_device
[KERNEL] usb usb2: configuration #1 chosen from 1 choice
[KERNEL] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[KERNEL] hub 2-0:1.0: usb_probe_interface
[KERNEL] hub 2-0:1.0: usb_probe_interface - got id
[KERNEL] hub 2-0:1.0: USB hub found
[KERNEL] hub 2-0:1.0: 2 ports detected
[KERNEL] hub 2-0:1.0: standalone hub
[KERNEL] hub 2-0:1.0: no power switching (usb 1.0)
[KERNEL] hub 2-0:1.0: individual port over-current protection
[KERNEL] hub 2-0:1.0: power on to power good time: 2ms
[KERNEL] hub 2-0:1.0: local power source is good
[KERNEL] hub 2-0:1.0: trying to enable port power on non-switchable hub
[KERNEL] drivers/usb/core/inode.c: creating file '001'
[KERNEL] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0
[KERNEL] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[KERNEL] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[KERNEL] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[KERNEL] drivers/usb/core/inode.c: creating file '003'
[KERNEL] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[KERNEL] uhci_hcd 0000:00:1d.1: detected 2 ports
[KERNEL] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
[KERNEL] uhci_hcd 0000:00:1d.1: Performing full reset
[KERNEL] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
[KERNEL] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e200
[KERNEL] usb usb3: default language 0x0409
[KERNEL] usb usb3: udev 1, busnum 3, minor = 256
[KERNEL] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[KERNEL] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[KERNEL] usb usb3: Product: UHCI Host Controller
[KERNEL] usb usb3: Manufacturer: Linux 3.0.0 uhci_hcd
[KERNEL] usb usb3: SerialNumber: 0000:00:1d.1
[KERNEL] usb usb3: usb_probe_device
[KERNEL] usb usb3: configuration #1 chosen from 1 choice
[KERNEL] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[KERNEL] hub 3-0:1.0: usb_probe_interface
[KERNEL] hub 3-0:1.0: usb_probe_interface - got id
[KERNEL] hub 3-0:1.0: USB hub found
[KERNEL] hub 3-0:1.0: 2 ports detected
[KERNEL] hub 3-0:1.0: standalone hub
[KERNEL] hub 3-0:1.0: no power switching (usb 1.0)
[KERNEL] hub 3-0:1.0: individual port over-current protection
[KERNEL] hub 3-0:1.0: power on to power good time: 2ms
[KERNEL] hub 3-0:1.0: local power source is good
[KERNEL] hub 3-0:1.0: trying to enable port power on non-switchable hub
[KERNEL] drivers/usb/core/inode.c: creating file '001'
[KERNEL] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1
[KERNEL] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[KERNEL] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[KERNEL] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[KERNEL] drivers/usb/core/inode.c: creating file '004'
[KERNEL] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[KERNEL] uhci_hcd 0000:00:1d.2: detected 2 ports
[KERNEL] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
[KERNEL] uhci_hcd 0000:00:1d.2: Performing full reset
[KERNEL] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
[KERNEL] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e300
[KERNEL] usb usb4: default language 0x0409
[KERNEL] usb usb4: udev 1, busnum 4, minor = 384
[KERNEL] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[KERNEL] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[KERNEL] usb usb4: Product: UHCI Host Controller
[KERNEL] usb usb4: Manufacturer: Linux 3.0.0 uhci_hcd
[KERNEL] usb usb4: SerialNumber: 0000:00:1d.2
[KERNEL] usb usb4: usb_probe_device
[KERNEL] usb usb4: configuration #1 chosen from 1 choice
[KERNEL] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[KERNEL] hub 4-0:1.0: usb_probe_interface
[KERNEL] hub 4-0:1.0: usb_probe_interface - got id
[KERNEL] hub 4-0:1.0: USB hub found
[KERNEL] hub 4-0:1.0: 2 ports detected
[KERNEL] hub 4-0:1.0: standalone hub
[KERNEL] hub 4-0:1.0: no power switching (usb 1.0)
[KERNEL] hub 4-0:1.0: individual port over-current protection
[KERNEL] hub 4-0:1.0: power on to power good time: 2ms
[KERNEL] hub 4-0:1.0: local power source is good
[KERNEL] hub 4-0:1.0: trying to enable port power on non-switchable hub
[KERNEL] drivers/usb/core/inode.c: creating file '001'
[KERNEL] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2
[KERNEL] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[KERNEL] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[KERNEL] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[KERNEL] drivers/usb/core/inode.c: creating file '005'
[KERNEL] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[KERNEL] uhci_hcd 0000:00:1d.3: detected 2 ports
[KERNEL] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000
[KERNEL] uhci_hcd 0000:00:1d.3: Performing full reset
[KERNEL] uhci_hcd 0000:00:1d.3: supports USB remote wakeup
[KERNEL] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e400
[KERNEL] usb usb5: default language 0x0409
[KERNEL] usb usb5: udev 1, busnum 5, minor = 512
[KERNEL] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[KERNEL] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[KERNEL] usb usb5: Product: UHCI Host Controller
[KERNEL] usb usb5: Manufacturer: Linux 3.0.0 uhci_hcd
[KERNEL] usb usb5: SerialNumber: 0000:00:1d.3
[KERNEL] usb usb5: usb_probe_device
[KERNEL] usb usb5: configuration #1 chosen from 1 choice
[KERNEL] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[KERNEL] hub 5-0:1.0: usb_probe_interface
[KERNEL] hub 5-0:1.0: usb_probe_interface - got id
[KERNEL] hub 5-0:1.0: USB hub found
[KERNEL] hub 5-0:1.0: 2 ports detected
[KERNEL] hub 5-0:1.0: standalone hub
[KERNEL] hub 5-0:1.0: no power switching (usb 1.0)
[KERNEL] hub 5-0:1.0: individual port over-current protection
[KERNEL] hub 5-0:1.0: power on to power good time: 2ms
[KERNEL] hub 5-0:1.0: local power source is good
[KERNEL] hub 5-0:1.0: trying to enable port power on non-switchable hub
[KERNEL] drivers/usb/core/inode.c: creating file '001'
[KERNEL] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.3
[KERNEL] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[KERNEL] serio: i8042 KBD port at 0x60,0x64 irq 1
[KERNEL] serio: i8042 AUX port at 0x60,0x64 irq 12
[KERNEL] mousedev: PS/2 mouse device common for all mice
[KERNEL] input: PC Speaker as /devices/platform/pcspkr/input/input2
[KERNEL] cpuidle: using governor ladder
[KERNEL] usbcore: registered new interface driver usbhid
[KERNEL] usbhid: USB HID core driver
[KERNEL] TCP cubic registered
[KERNEL] NET: Registered protocol family 17
[KERNEL] Using IPI Shortcut mode
[KERNEL] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[KERNEL] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 001803 0 ACK POWER sig=j CSC CONNECT
[KERNEL] hub 1-0:1.0: port 8: status 0501 change 0001
[KERNEL] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
[KERNEL] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[KERNEL] uhci_hcd 0000:00:1d.3: port 2 portsc 008a,00
[KERNEL] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[KERNEL] hub 1-0:1.0: state 7 ports 8 chg 0100 evt 0000
[KERNEL] hub 1-0:1.0: port 8, status 0501, change 0000, 480 Mb/s
[KERNEL] ehci_hcd 0000:00:1d.7: port 8 high speed
[KERNEL] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 001005 0 ACK POWER sig=se0 PE CONNECT
[KERNEL] usb 1-8: new high speed USB device number 2 using ehci_hcd
[KERNEL] ehci_hcd 0000:00:1d.7: port 8 high speed
[KERNEL] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 001005 0 ACK POWER sig=se0 PE CONNECT
[KERNEL] usb 1-8: default language 0x0409
[KERNEL] usb 1-8: udev 2, busnum 1, minor = 1
[KERNEL] usb 1-8: New USB device found, idVendor=03f0, idProduct=2b17
[KERNEL] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[KERNEL] usb 1-8: Product: HP LaserJet 1020
[KERNEL] usb 1-8: Manufacturer: Hewlett-Packard
[KERNEL] usb 1-8: SerialNumber: FN003M8
[KERNEL] usb 1-8: usb_probe_device
[KERNEL] usb 1-8: configuration #1 chosen from 1 choice
[KERNEL] usb 1-8: adding 1-8:1.0 (config #1, interface 0)
[KERNEL] drivers/usb/core/inode.c: creating file '002'
[KERNEL] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
[KERNEL] Refined TSC clocksource calibration: 2499.940 MHz.
[KERNEL] Switching to clocksource tsc
[KERNEL] usb usb2: suspend_rh (auto-stop)
[KERNEL] usb usb3: suspend_rh (auto-stop)
[KERNEL] usb usb4: suspend_rh (auto-stop)
[KERNEL] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
[KERNEL] RAMDISK: lzo image found at block 0
[KERNEL] VFS: Mounted root (romfs filesystem) readonly on device 1:0.
[KERNEL] Freeing unused kernel memory: 292k freed
[KERNEL] usb usb5: suspend_rh (auto-stop)
[pfac] Ok, PID 419.
[initrd] WTware shell v.5.0.1
[initrd] PCIID: 8086:29c0 class 00 subclass 00.
[initrd] PCIID: 8086:29c2 class 00 subclass 00.
[initrd] PCIID: 8086:27d8 class 03 subclass 00.
[initrd] PCIID: 8086:27d0 class 04 subclass 00.
[initrd] PCIID: 8086:27d2 class 04 subclass 00.
[initrd] WARNING: multiple devices same type: 8086:27d2 and 8086:27d0. One of them will not work.
[initrd] PCIID: 8086:27c8 class 03 subclass 00.
[initrd] PCIID: 8086:27c9 class 03 subclass 00.
[initrd] PCIID: 8086:27ca class 03 subclass 00.
[initrd] PCIID: 8086:27cb class 03 subclass 00.
[initrd] PCIID: 8086:27cc class 03 subclass 20.
[initrd] PCIID: 8086:244e class 04 subclass 01.
[initrd] WARNING: multiple devices same type: 8086:244e and 8086:27d0. One of them will not work.
[initrd] PCIID: 8086:27b8 class 01 subclass 00.
[initrd] PCIID: 8086:27c0 class 01 subclass 80.
[initrd] PCIID: 8086:27da class 05 subclass 00.
[initrd] PCIID: 10ec:8168 class 00 subclass 00.
[initrd] PCIID, VGA: 8086:27d8.
[initrd] PCIID, second VGA: 8086:27cc.
[initrd] PCIID, sound: 8086:27d0.
/--- FILE "/proc/bus/usb/devices" -----------------------
| T: Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
| B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
| D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
| P: Vendor=1d6b ProdID=0001 Rev= 3.00
| S: Manufacturer=Linux 3.0.0 uhci_hcd
| S: Product=UHCI Host Controller
| S: SerialNumber=0000:00:1d.3
| C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
| I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
| E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
| T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
| B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
| D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
| P: Vendor=1d6b ProdID=0001 Rev= 3.00
| S: Manufacturer=Linux 3.0.0 uhci_hcd
| S: Product=UHCI Host Controller
| S: SerialNumber=0000:00:1d.2
| C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
| I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
| E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
| T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
| B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
| D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
| P: Vendor=1d6b ProdID=0001 Rev= 3.00
| S: Manufacturer=Linux 3.0.0 uhci_hcd
| S: Product=UHCI Host Controller
| S: SerialNumber=0000:00:1d.1
| C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
| I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
| E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
| T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
| B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
| D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
| P: Vendor=1d6b ProdID=0001 Rev= 3.00
| S: Manufacturer=Linux 3.0.0 uhci_hcd
| S: Product=UHCI Host Controller
| S: SerialNumber=0000:00:1d.0
| C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
| I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
| E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
| T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8
| B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
| D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
| P: Vendor=1d6b ProdID=0002 Rev= 3.00
| S: Manufacturer=Linux 3.0.0 ehci_hcd
| S: Product=EHCI Host Controller
| S: SerialNumber=0000:00:1d.7
| C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
| I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
| E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
| T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
| D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
| P: Vendor=03f0 ProdID=2b17 Rev= 1.00
| S: Manufacturer=Hewlett-Packard
| S: Product=HP LaserJet 1020
| S: SerialNumber=FN003M8
| C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 98mA
| I:* If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=(none)
| E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
| E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
\----------------------------------------------------
[initrd] Loading ethernet drivers.
[initrd] +--- Executing "/sbin/modprobe r8169"
[KERNEL] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[KERNEL] r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[KERNEL] r8169 0000:02:00.0: setting latency timer to 64
[KERNEL] r8169 0000:02:00.0: no MSI. Back to INTx.
[KERNEL] r8169 0000:02:00.0: eth0: RTL8168c/8111c at 0xf87ce000, 00:1f:d0:9b:5c:1e, XID 1c4000c0 IRQ 17
[initrd] +- Errorlevel: 0, output:
[initrd] +------------------------
[initrd] NIC module r8169.ko loaded.
[KERNEL] r8169 0000:02:00.0: eth0: link down
[KERNEL] r8169 0000:02:00.0: eth0: link down
[KERNEL] r8169 0000:02:00.0: eth0: link up
[initrd] dhcp: 372 bytes from 192.168.0.4.
[initrd] 00000000:000001600000000000110000c0a80004ffffffff004300440160000002010600
[initrd] 00000020:67458b6b0000000000000000c0a8021ac0a8036f00000000001fd09b5c1e0000
[initrd] 00000040:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 00000060:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 00000080:0000000000000000352e302e315c7774776172652e7078650000000000000000
[initrd] 000000a0:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 000000c0:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 000000e0:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 00000100:0000000000000000638253633501020104ffffe0003a04000038403b04000062
[initrd] 00000120:703304000070803604c0a800040304c0a800f70610c0a80004c0a800f7c0a800
[initrd] 00000140:06c0a81f010f09767368752e65647500420e3139322e3136382e332e31313100
[initrd] 00000160:4311352e302e315c7774776172652e70786500ff
[initrd] dhcp: 372 bytes from 192.168.0.4.
[initrd] 00000000:000001600000000000110000c0a80004ffffffff004300440160000002010600
[initrd] 00000020:67458b6b0000000000000000c0a8021ac0a8036f00000000001fd09b5c1e0000
[initrd] 00000040:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 00000060:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 00000080:0000000000000000352e302e315c7774776172652e7078650000000000000000
[initrd] 000000a0:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 000000c0:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 000000e0:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 00000100:0000000000000000638253633501053a04000038403b04000062703304000070
[initrd] 00000120:803604c0a800040104ffffe0000304c0a800f70610c0a80004c0a800f7c0a800
[initrd] 00000140:06c0a81f010f09767368752e65647500420e3139322e3136382e332e31313100
[initrd] 00000160:4311352e302e315c7774776172652e70786500ff
[initrd] dhcp: server address 192.168.0.4.
[initrd] dhcp: 192.168.2.26/255.255.224.0.
[initrd] dhcp: default gateway 192.168.0.247.
[initrd] dhcp: DNS 192.168.0.4.
[initrd] dhcp: DNS 192.168.0.247.
[initrd] dhcp: DNS 192.168.0.6.
[initrd] dhcp: DNS 192.168.31.1.
[initrd] dhcp: domain vshu.edu.
[initrd] dhcp: TFTP 192.168.3.111.
[initrd] dhcp: boot file (067) 5.0.1\wtware.pxe.
[initrd] TFTP binary "5.0.1\", configs prefix "", using "\" slash.
Send broadcast WTCU discover.
[initrd] WTware TFTP v.5.0.1.
[initrd] tftp: download file Everyone\list.wtc from 192.168.3.111.
/--- FILE "/tmp/list.wtc" -----------------------
| #
| # Ñïèñîê ïîäêëþ÷àåìûõ ôàéëîâ.
| #
| # Ýòîò îòäåëüíûé ìåõàíèçì íàñòðîéêè òåðìèíàëîâ ïðåäíàçíà÷åí òîëüêî
| # äëÿ ðó÷íîãî êîíôèãóðèðîâàíèÿ òåðìèíàëîâ. Ãðàôè÷åñêèé êîíôèãóðàòîð
| # íå ÷èòàåò list.wtc, íå ÷èòàåò è íå ïîçâîëÿåò ðåäàêòèðîâàòü ôàéëû
| # èç êàòàëîãà ListIncludes. Ïîýòîìó íåëüçÿ ïûòàòüñÿ íàñòðàèâàòü îäèí
| # è òîò æå òåðìèíàë è êîíôèãóðàòîðîì, è ÷åðåç list.wtc.
| #
| # Ôîðìàò ñòðîêè â ýòîì ôàéëå:
| #
| # 01.02.03.04.05.06[([èìÿïîëüçîâàòåëÿ@][èìÿòåðìèíàëà])] [ôàéë [ôàéë ...]]] [# êîììåíòàðèé]
| #
| # Ïðèìåðû:
| #
| # 02.03.04.05.06.07 file1
| #
| # Îçíà÷àåò, ÷òî òåðìèíàë ñ ìàê-àäðåñîì 02.03.04.05.06.07 ïðî÷èòàåò
| # ïàðàìåòðû èç ôàéëà ListIncludes/file1.
| #
| #
| # 03.04.05.06.07.08(vasja@) file2
| #
| # Îçíà÷àåò, ÷òî òåðìèíàë ñ ìàê-àäðåñîì 03.04.05.06.07.08 ïðî÷èòàåò
| # ïàðàìåòðû èç ôàéëà ListIncludes/file2 è â îêîøêî "Âõîä â Windows"
| # ïîäñòàâèò èìÿ ïîëüçîâàòåëÿ "vasja".
| #
| #
| # 04.05.06.07.08.09(term5) file6 file7 # Êîìï çàìãëàâáóõà.
| #
| # Îçíà÷àåò, ÷òî òåðìèíàëó ñ ìàê-àäðåñîì 04.05.06.07.08.09 áóäåò
| # ïðèñâîåíî èìÿ term5, àíàëîãè÷íî óêàçàíèþ ïàðàìåòðà clienthostname,
| # è îí ïðî÷èòàåò ïàðàìåòðû èç ôàéëîâ ListIncludes/file6 è
| # ListIncludes/file7.
| #
| #
| # ×òîáû ìîæíî áûëî óêàçûâàòü èìÿ ïîëüçîâàòåëÿ ðóññêèìè áóêâàìè, íàäî
| # îòêðûòü ýòîò ôàéë â Notepad è ñîõðàíèòü ñ Encoding: Unicode.
| #
\----------------------------------------------------
[initrd] tftp: download file Terminals\00.1F.D0.9B.5C.1E\config.wtc from 192.168.3.111.
/--- FILE "/tmp/config.wtc" -----------------------
| [BOM]
| video=VESA(F)
| resolution=1280x1024
| bpp=16
| user=vshu\dng
| keyboard=ru
| graphic=adg
| language=ru,default
| keyswitch=alt-shift
| shared_disk=floppy;cdrom;usb
| disk=usb
| timezone=
| shared_usb=off
| animation_speed=off
| mouse_accel_mult=4
| scanner=on
| printer=usb
| connection
\----------------------------------------------------
[initrd] tftp: download file Everyone\all.wtc from 192.168.3.111.
/--- FILE "/tmp/all.wtc" -----------------------
| server=192.168.3.111
\----------------------------------------------------
[initrd] tftp: download file Everyone\wtware.lic from 192.168.3.111.
/--- FILE "/etc/config.compiled" -----------------------
| [BOM]
| server=192.168.3.111
| video=VESA(F)
| resolution=1280x1024
| bpp=16
| user=vshu\dng
| keyboard=ru
| graphic=adg
| language=ru,default
| keyswitch=alt-shift
| shared_disk=floppy;cdrom;usb
| disk=usb
| timezone=
| shared_usb=off
| animation_speed=off
| mouse_accel_mult=4
| scanner=on
| printer=usb
| connection
\----------------------------------------------------
[initrd] Hostname: "wtw001FD09B5C1E".
Saned listener active.
RSHd listener active.
Everyone can control terminal by http.
[initrd] tftp: download and unpack file 5.0.1\packages\print from 192.168.3.111.
[initrd] Loading usb printer driver.
[initrd] +--- Executing "/sbin/modprobe usblp"
[KERNEL] usblp 1-8:1.0: usb_probe_interface
[KERNEL] usblp 1-8:1.0: usb_probe_interface - got id
[KERNEL] usblp 1-8:1.0: looking for a minor, starting at 0
[KERNEL] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17
[initrd] +- Errorlevel: 0, output:
[KERNEL] usbcore: registered new interface driver usblp
[pfac] Got command line /sbin/printer 0 11 0.
[initrd] +------------------------
[pfac] Ok, PID 438.
[initrd] tftp: download and unpack file 5.0.1\packages\f from 192.168.3.111.
[printer] Printserver, WTware v.5.0.1
[printer] Printserver 0, device /dev/lpUSB0, listen at port 9100.
[initrd] tftp: download and unpack file 5.0.1\packages\graphic from 192.168.3.111.
[gm] WTware session manager v.5.0.1.
[gm] New mode: 1280x1024, 16 bit, 0 Hz, modeline "", DDC enabled, connector 0.
[gm] Mouse PnP: IMPS2 or EXPPS2?
[gm] Mouse PnP: EXPPS2.
[gm] Call _emulate ().
[gm] VBE Version 3.0.
[gm] VBE modelist at 0x00011050.
[gm] Mode 316: 1920x1440 (256 color palette) linelength 1920 bits 8.
[gm] Mode 333: 1920x1440 (5:6:5) linelength 3840 bits 16.
[gm] Mode 314: 1600x1200 (256 color palette) linelength 1600 bits 8.
[gm] Mode 331: 1600x1200 (5:6:5) linelength 3200 bits 16.
[gm] Mode 346: 1600x1200 (8:8:8) linelength 6400 bits 32.
[gm] Mode 263: 1280x1024 (256 color palette) linelength 1280 bits 8.
[gm] Mode 282: 1280x1024 (5:6:5) linelength 2560 bits 16.
[gm] Use mode 282.
[gm] Mode 283: 1280x1024 (8:8:8) linelength 5120 bits 32.
[gm] Mode 261: 1024x768 (256 color palette) linelength 1024 bits 8.
[gm] Mode 279: 1024x768 (5:6:5) linelength 2048 bits 16.
[gm] Mode 280: 1024x768 (8:8:8) linelength 4096 bits 32.
[gm] Mode 274: 640x480 (8:8:8) linelength 2560 bits 32.
[gm] Mode 276: 800x600 (5:6:5) linelength 1600 bits 16.
[gm] Mode 277: 800x600 (8:8:8) linelength 3200 bits 32.
[gm] Mode 257: 640x480 (256 color palette) linelength 640 bits 8.
[gm] Mode 259: 800x600 (256 color palette) linelength 832 bits 8.
[gm] Mode 273: 640x480 (5:6:5) linelength 1280 bits 16.
[gm] Linear framebuffer.
[gm] mmap () return 0xb73f9000. Touch video memory.
[gm] Ok.
[gm] WTware TFTP v.5.0.1.
[gm] tftp: download and unpack file 5.0.1\packages\samba from 192.168.3.111.
[gm] Loading ISO 9660 and UDF CDROM filesystem drivers.
[gm] +--- Executing "/sbin/modprobe udf"
[gm] +- Errorlevel: 0, output:
[gm] +------------------------
[gm] +--- Executing "/sbin/modprobe isofs"
[gm] +- Errorlevel: 0, output:
[gm] +------------------------
[gm] Loading UTF8 charset.
[gm] +--- Executing "/sbin/modprobe nls_cp437"
[gm] +- Errorlevel: 0, output:
[gm] +------------------------
[gm] +--- Executing "/sbin/modprobe nls_utf8"
[gm] +- Errorlevel: 0, output:
[gm] +------------------------
[gm] Loading VFAT filesystem driver.
[gm] +--- Executing "/sbin/modprobe fat"
[gm] +- Errorlevel: 0, output:
[gm] +------------------------
[gm] +--- Executing "/sbin/modprobe vfat"
[gm] +- Errorlevel: 0, output:
[gm] +------------------------
[gm] +--- Executing "/sbin/modprobe ntfs"
[gm] +- Errorlevel: 0, output:
[KERNEL] NTFS driver 2.1.30 [Flags: R/O MODULE].
[gm] +------------------------
[gm] Loading IDE bus driver.
[gm] +--- Executing "/sbin/modprobe libata dma=2"
[KERNEL] SCSI subsystem initialized
[gm] +- Errorlevel: 0, output:
[KERNEL] libata version 3.00 loaded.
[gm] +------------------------
[gm] +--- Executing "/sbin/modprobe ata_piix"
[KERNEL] ata_piix 0000:00:1f.2: version 2.13
[KERNEL] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[KERNEL] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[KERNEL] ata_piix 0000:00:1f.2: setting latency timer to 64
[KERNEL] scsi0 : ata_piix
[KERNEL] scsi1 : ata_piix
[KERNEL] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[KERNEL] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[KERNEL] ata2.00: ATAPI: Optiarc DVD RW AD-7203A, 1.05, max UDMA/66
[KERNEL] ata2.00: configured for UDMA/66
[KERNEL] ata1.00: HPA detected: current 625140335, native 625142448
[KERNEL] ata1.00: ATA-8: ST3320613AS, CC2F, max UDMA/133
[KERNEL] ata1.00: 625140335 sectors, multi 16: LBA48 NCQ (depth 0/32)
[KERNEL] ata1.00: configured for PIO4
[KERNEL] scsi 0:0:0:0: Direct-Access ATA ST3320613AS CC2F PQ: 0 ANSI: 5
[KERNEL] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7203A 1.05 PQ: 0 ANSI: 5
[gm] +- Errorlevel: 0, output:
[gm] +------------------------
[gm] ATA module ata_piix.ko loaded.
[gm] Loading cdrom driver.
[gm] +--- Executing "/sbin/modprobe usb-storage"
[KERNEL] Initializing USB Mass Storage driver...
[gm] +- Errorlevel: 0, output:
[KERNEL] usbcore: registered new interface driver usb-storage
[KERNEL] USB Mass Storage support registered.
[gm] +------------------------
[gm] +--- Executing "/sbin/modprobe sr_mod"
[KERNEL] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[KERNEL] cdrom: Uniform CD-ROM driver Revision: 3.20
[KERNEL] sr 1:0:0:0: Attached scsi CD-ROM sr0
[hotplug] Block device 11:0. No action.
[gm] +- Errorlevel: 0, output:
[gm] +------------------------
[gm] Loading usb storage driver.
[gm] +--- Executing "/sbin/modprobe scsi_mod"
[gm] +- Errorlevel: 0, output:
[gm] +------------------------
[gm] +--- Executing "/sbin/modprobe usb-storage"
[gm] +- Errorlevel: 0, output:
[gm] +------------------------
[gm] +--- Executing "/sbin/modprobe sd_mod"
[hotplug] Block device 11:0. No action.
[KERNEL] sd 0:0:0:0: [sda] 625140335 512-byte logical blocks: (320 GB/298 GiB)
[KERNEL] sd 0:0:0:0: [sda] Write Protect is off
[KERNEL] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[KERNEL] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[KERNEL] sda: sda1 sda2 < sda5 >
[gm] +- Errorlevel: 0, output:
[KERNEL] sd 0:0:0:0: [sda] Attached SCSI disk
[gm] +------------------------
[gm] Loading floppy driver.
[gm] +--- Executing "/sbin/modprobe floppy"
[KERNEL] Floppy drive(s): fd0 is 1.44M
[KERNEL] FDC 0 is a post-1991 82077
[gm] +- Errorlevel: 0, output:
[gm] +------------------------
[gm] tftp: download and unpack file 5.0.1\packages\scan from 192.168.3.111.
[hotplug] Block device 2:0. No action.
[pfac] Got command line /sbin/resolver 0 dns [192.168.3.111].
[pfac] Ok, PID 516.
[pfac] Process pid 516 terminated, status 00000000.
[gm] 192.168.3.111 => 192.168.3.111.
[gm] Free ram before fork terminal client /sbin/rdpclient (session 1): 878732 Kb.
[pfac] Got command line /sbin/rdpclient 1.
[pfac] Ok, PID 517.
[rdpclient 517] RDP Terminal Client, WTware v.5.0.1, pipe 1, pid 517.
[rdpclient 517] Add RDPDR channel.
[rdpclient 517] Add WTVC WTware control channel.
[rdpclient 517] Make RDP session with 192.168.3.111:3389.
[rdpclient 517] Username: "dng".
[rdpclient 517] No password.
[rdpclient 517] Domain: "vshu".
[rdpclient 517] No shell.
[rdpclient 517] No directory.
[rdpclient 517] Window: 1280x1024@16.
[rdpclient 517] PFlags 0x00000166.
[rdpclient 517] Keyboard 00000419:00000000.
[rdpclient 517] My hostname "wtw001FD09B5C1E".
[rdpclient 517] TCP: connecting to 192.168.3.111:3389.
[rdpclient 517] TCP: connection with 192.168.3.111:3389 established.
[rdpclient 517] Turn keepalive on.
[rdpclient 517] Free ram after buffers allocation: 875252 KB.
[rdpclient 517] RDP5 encryption (X.509).
[rdpclient 517] RC4 key 128 bit.
[rdpclient 517] Got PDUTYPE2_SET_ERROR_INFO_PDU with errorInfo 0x00000000.
[rdpclient 517] No additional information is available.
[rdpclient 517] SessionId 0x00000010: VSHU\dng.
Send WTCU discover to 192.168.0.78.
Send WTCU discover to 192.168.0.78.
[printer] First connection to printserver, device /dev/lpUSB0.
[printer] Printer USB ID 03f0:2b17
[KERNEL] usb 1-8: printer timed out on ep0in len=0/1
Send WTCU discover to 192.168.0.78.
Send WTCU discover to 192.168.0.78.
Connection from wtc.exe at 192.168.0.78.