WTware 5.8.26
WTware 5.8.26/RPi supervisor.
[ KERNEL] [ 0.000000] Booting Linux on physical CPU 0x0
[ KERNEL] [ 0.000000] Linux version 4.14.67 (aka@c20) (gcc version 6.3.0 20170516 (Debian 6.3.0-18)) #3 SMP Thu Aug 30 19:20:27 UTC 2018
[ KERNEL] [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[ KERNEL] [ 0.000000] CPU: div instructions available: patching division code
[ KERNEL] [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ KERNEL] [ 0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2
[ KERNEL] [ 0.000000] Memory policy: Data cache writealloc
[ KERNEL] [ 0.000000] cma: Reserved 8 MiB at 0x3ac00000
[ KERNEL] [ 0.000000] On node 0 totalpages: 242688
[ KERNEL] [ 0.000000] free_area_init_node: node 0, pgdat 80b24500, node_mem_map ba39f000
[ KERNEL] [ 0.000000] Normal zone: 2133 pages used for memmap
[ KERNEL] [ 0.000000] Normal zone: 0 pages reserved
[ KERNEL] [ 0.000000] Normal zone: 242688 pages, LIFO batch:31
[ KERNEL] [ 0.000000] percpu: Embedded 15 pages/cpu @ba350000 s28684 r8192 d24564 u61440
[ KERNEL] [ 0.000000] pcpu-alloc: s28684 r8192 d24564 u61440 alloc=15*4096
[ KERNEL] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ KERNEL] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 240555
[ KERNEL] [ 0.000000] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbdepth=32 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 quiet wtboot=mmc
[ KERNEL] [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ KERNEL] [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ KERNEL] [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ KERNEL] [ 0.000000] Memory: 942072K/970752K available (5120K kernel code, 150K rwdata, 652K rodata, 4096K init, 367K bss, 20488K reserved, 8192K cma-reserved)
[ KERNEL] [ 0.000000] Virtual kernel memory layout:
[ KERNEL] [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ KERNEL] [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ KERNEL] [ 0.000000] vmalloc : 0xbb800000 - 0xff800000 (1088 MB)
[ KERNEL] [ 0.000000] lowmem : 0x80000000 - 0xbb400000 ( 948 MB)
[ KERNEL] [ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
[ KERNEL] [ 0.000000] .text : 0x80008000 - 0x80600000 (6112 kB)
[ KERNEL] [ 0.000000] .init : 0x80700000 - 0x80b00000 (4096 kB)
[ KERNEL] [ 0.000000] .data : 0x80b00000 - 0x80b25a70 ( 151 kB)
[ KERNEL] [ 0.000000] .bss : 0x80b27000 - 0x80b82ebc ( 368 kB)
[ KERNEL] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ KERNEL] [ 0.000000] Hierarchical RCU implementation.
[ KERNEL] [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ KERNEL] [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[ KERNEL] [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ KERNEL] [ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ KERNEL] [ 0.000017] Switching to timer-based delay loop, resolution 52ns
[ KERNEL] [ 0.000196] Console: colour dummy device 80x30
[ KERNEL] [ 0.000212] console [tty0] enabled
[ KERNEL] [ 0.000233] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ KERNEL] [ 0.000246] pid_max: default: 32768 minimum: 301
[ KERNEL] [ 0.000401] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ KERNEL] [ 0.000415] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ KERNEL] [ 0.001278] Disabling memory control group subsystem
[ KERNEL] [ 0.001338] CPU: Testing write buffer coherency: ok
[ KERNEL] [ 0.001696] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ KERNEL] [ 0.002035] Setting up static identity map for 0x100000 - 0x10003c
[ KERNEL] [ 0.002143] Hierarchical SRCU implementation.
[ KERNEL] [ 0.002699] smp: Bringing up secondary CPUs ...
[ KERNEL] [ 0.003312] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ KERNEL] [ 0.003988] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ KERNEL] [ 0.004627] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ KERNEL] [ 0.004714] smp: Brought up 1 node, 4 CPUs
[ KERNEL] [ 0.004724] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[ KERNEL] [ 0.004728] CPU: All CPU(s) started in HYP mode.
[ KERNEL] [ 0.004731] CPU: Virtualization extensions available.
[ KERNEL] [ 0.005337] devtmpfs: initialized
[ KERNEL] [ 0.014191] random: get_random_u32 called from 0x802d752c with crng_init=0
[ KERNEL] [ 0.014561] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[ KERNEL] [ 0.014911] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ KERNEL] [ 0.014925] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ KERNEL] [ 0.015432] pinctrl core: initialized pinctrl subsystem
[ KERNEL] [ 0.015897] NET: Registered protocol family 16
[ KERNEL] [ 0.017946] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ KERNEL] [ 0.024403] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ KERNEL] [ 0.063419] bcm2835-dma 3f007000.dma: DMA legacy API manager at bb813000, dmachans=0x1
[ KERNEL] [ 0.065398] usbcore: registered new interface driver usbfs
[ KERNEL] [ 0.065506] usbcore: registered new interface driver hub
[ KERNEL] [ 0.065597] usbcore: registered new device driver usb
[ KERNEL] [ 0.070412] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-08-29 14:52
[ KERNEL] [ 0.072379] clocksource: Switched to clocksource arch_sys_counter
[ KERNEL] [ 0.083788] NET: Registered protocol family 2
[ KERNEL] [ 0.084520] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ KERNEL] [ 0.084629] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ KERNEL] [ 0.084813] TCP: Hash tables configured (established 8192 bind 8192)
[ KERNEL] [ 0.084935] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ KERNEL] [ 0.084977] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ KERNEL] [ 0.085183] NET: Registered protocol family 1
[ KERNEL] [ 2.213134] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ KERNEL] [ 2.267205] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ KERNEL] [ 2.267219] io scheduler noop registered
[ KERNEL] [ 2.267225] io scheduler deadline registered
[ KERNEL] [ 2.267494] io scheduler cfq registered (default)
[ KERNEL] [ 2.267504] io scheduler mq-deadline registered
[ KERNEL] [ 2.267509] io scheduler kyber registered
[ KERNEL] [ 2.271885] BCM2708FB: allocated DMA memory fad10000
[ KERNEL] [ 2.271927] BCM2708FB: allocated DMA channel 0 @ bb813000
[ KERNEL] [ 2.326535] Console: switching to colour frame buffer device 240x67
[ KERNEL] [ 2.358485] bcm2835-rng 3f104000.rng: hwrng registered
[ KERNEL] [ 2.358746] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ KERNEL] [ 2.359562] vc-sm: Videocore shared memory driver
[ KERNEL] [ 2.360210] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[ KERNEL] [ 2.361427] zram: Added device: zram0
[ KERNEL] [ 2.361461] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ KERNEL] [ 2.389474] dwc_otg 3f980000.usb: base=0xf0980000
[ KERNEL] [ 2.589714] Core Release: 2.80a
[ KERNEL] [ 2.589726] Setting default values for core params
[ KERNEL] [ 2.589753] Finished setting default values for core params
[ KERNEL] [ 2.632374] NOHZ: local_softirq_pending 80
[ KERNEL] [ 2.652372] NOHZ: local_softirq_pending 80
[ KERNEL] [ 2.672373] NOHZ: local_softirq_pending 80
[ KERNEL] [ 2.682372] NOHZ: local_softirq_pending 80
[ KERNEL] [ 2.702370] NOHZ: local_softirq_pending 80
[ KERNEL] [ 2.722370] NOHZ: local_softirq_pending 80
[ KERNEL] [ 2.742370] NOHZ: local_softirq_pending 80
[ KERNEL] [ 2.782371] NOHZ: local_softirq_pending 80
[ KERNEL] [ 2.790016] Using Buffer DMA mode
[ KERNEL] [ 2.790022] Periodic Transfer Interrupt Enhancement - disabled
[ KERNEL] [ 2.790027] Multiprocessor Interrupt Enhancement - disabled
[ KERNEL] [ 2.790033] OTG VER PARAM: 0, OTG VER FLAG: 0
[ KERNEL] [ 2.790063] Dedicated Tx FIFOs mode
[ KERNEL] [ 2.790610] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xbad04000 dma = 0xfad04000 len=9024
[ KERNEL] [ 2.790636] FIQ FSM acceleration enabled for :
[ KERNEL] [ 2.790636] Non-periodic Split Transactions
[ KERNEL] [ 2.790636] Periodic Split Transactions
[ KERNEL] [ 2.790636] High-Speed Isochronous Endpoints
[ KERNEL] [ 2.790636] Interrupt/Control Split Transaction hack enabled
[ KERNEL] [ 2.790642] dwc_otg: Microframe scheduler enabled
[ KERNEL] [ 2.790690] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x8039e8d4
[ KERNEL] [ 2.790699] WARN::hcd_init_fiq:460: FIQ ASM at 0x8039ec2c length 36
[ KERNEL] [ 2.790710] WARN::hcd_init_fiq:486: MPHI regs_base at 0xf0006000
[ KERNEL] [ 2.790761] dwc_otg 3f980000.usb: DWC OTG Controller
[ KERNEL] [ 2.790796] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[ KERNEL] [ 2.790830] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[ KERNEL] [ 2.790877] Init: Port Power? op_state=1
[ KERNEL] [ 2.790881] Init: Power Port (0)
[ KERNEL] [ 2.791058] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ KERNEL] [ 2.791068] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ KERNEL] [ 2.791076] usb usb1: Product: DWC OTG Controller
[ KERNEL] [ 2.791083] usb usb1: Manufacturer: Linux 4.14.67 dwc_otg_hcd
[ KERNEL] [ 2.791090] usb usb1: SerialNumber: 3f980000.usb
[ KERNEL] [ 2.791697] hub 1-0:1.0: USB hub found
[ KERNEL] [ 2.791735] hub 1-0:1.0: 1 port detected
[ KERNEL] [ 2.792475] dwc_otg: FIQ enabled
[ KERNEL] [ 2.792488] dwc_otg: NAK holdoff enabled
[ KERNEL] [ 2.792493] dwc_otg: FIQ split-transaction FSM enabled
[ KERNEL] [ 2.792509] Module dwc_common_port init
[ KERNEL] [ 2.793578] usbcore: registered new interface driver usbtouchscreen
[ KERNEL] [ 2.794670] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[ KERNEL] [ 2.795171] bcm2835-cpufreq: min=600000 max=1200000
[ KERNEL] [ 2.798568] sdhci: Secure Digital Host Controller Interface driver
[ KERNEL] [ 2.798581] sdhci: Copyright(c) Pierre Ossman
[ KERNEL] [ 2.799119] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[ KERNEL] [ 2.799603] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[ KERNEL] [ 2.799776] sdhci-pltfm: SDHCI platform and OF driver helper
[ KERNEL] [ 2.801382] ledtrig-cpu: registered to indicate activity on CPUs
[ KERNEL] [ 2.801526] hidraw: raw HID events driver (C) Jiri Kosina
[ KERNEL] [ 2.802092] usbcore: registered new interface driver usbhid
[ KERNEL] [ 2.802102] usbhid: USB HID core driver
[ KERNEL] [ 2.803816] vchiq: vchiq_init_state: slot_zero = bad80000, is_master = 0
[ KERNEL] [ 2.814978] [vc_sm_connected_init]: start
[ KERNEL] [ 2.823063] [vc_sm_connected_init]: end - returning 0
[ KERNEL] [ 2.823591] NET: Registered protocol family 17
[ KERNEL] [ 2.823726] Registering SWP/SWPB emulation handler
[ KERNEL] [ 2.824215] registered taskstats version 1
[ KERNEL] [ 2.829919] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[ KERNEL] [ 2.829930] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[ KERNEL] [ 2.893572] sdhost: log_buf @ bad07000 (fad07000)
[ KERNEL] [ 2.930081] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ KERNEL] [ 2.931574] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ KERNEL] [ 2.933067] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ KERNEL] [ 2.935734] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ KERNEL] [ 2.972402] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ KERNEL] [ 2.973517] of_cfs_init
[ KERNEL] [ 2.973626] of_cfs_init: OK
[ KERNEL] [ 2.993401] Freeing unused kernel memory: 4096K
[ KERNEL] [ 3.009399] Indeed it is in host mode hprt0 = 00021501
[ KERNEL] [ 3.052365] NOHZ: local_softirq_pending 80
[ KERNEL] [ 3.072364] NOHZ: local_softirq_pending 80
[ KERNEL] [ 3.073172] random: fast init done
[ KERNEL] [ 3.109695] mmc0: host does not support reading read-only switch, assuming write-enable
[ KERNEL] [ 3.113217] mmc0: new high speed SDHC card at address 0002
[ KERNEL] [ 3.114144] mmcblk0: mmc0:0002 N/A 7.44 GiB
[ KERNEL] [ 3.116185] mmcblk0: p1
[ KERNEL] [ 3.143793] mmc1: new high speed SDIO card at address 0001
[ KERNEL] [ 3.212446] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ KERNEL] [ 3.212629] Indeed it is in host mode hprt0 = 00001101
[ hotplug] [ 3.270732] Block device 254:0. No action.
[ hotplug] [ 3.418137] Block device 179:1. No action.
[ hotplug] [ 3.418268] Block device 179:0. No action.
[ KERNEL] [ 3.452949] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[ KERNEL] [ 3.452965] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ KERNEL] [ 3.454094] hub 1-1:1.0: USB hub found
[ KERNEL] [ 3.454205] hub 1-1:1.0: 5 ports detected
[ pfac] [ 3.477577] Run /sbin/initrd.
[ pfac] [ 3.477654] Ok, PID 637.
[ initrd] [ 3.481306] WTware 5.8.26/RPi shell.
[ initrd] [ 3.481764] Load font 'ter-c32b.psf', console 120x33.
[ initrd] [ 3.511070] MMC boot.
[ initrd] [ 3.514740] Success: media /dev/mmcblk0p1 mounted to /bootmedia.
/--- FILE "/bootmedia/config.txt" -----------------------
| # For more options and information see
| # http://www.raspberrypi.org/documentation/configuration/config-txt.md
| # Some settings may impact device functionality. See link above for details
| # Uncomment if you get no picture on HDMI for a default "safe" mode.
| #hdmi_safe=1
| # Uncomment this if your display has a black border of unused pixels visible
| # and your display can output without overscan.
| disable_overscan=1
| # Uncomment if hdmi display is not detected and composite is being output.
| #hdmi_force_hotplug=1
| # Uncomment to force a specific HDMI mode (this will force VGA).
| #hdmi_group=1
| #hdmi_mode=1
| # Force the monitor to HDMI mode so that sound will be sent over HDMI cable.
| #hdmi_drive=2
| # Uncomment to increase signal to HDMI, if you have interference, blanking, or
| # no display.
| #config_hdmi_boost=4
| # Uncomment to overclock the arm. 700 MHz is the default.
| #arm_freq=800
| disable_splash=1
| #hdmi_group=2
| # 800x600: hdmi_mode=9
| # 1024x768: hdmi_mode=16
| # 1280x1024: hdmi_mode=35
| # 1360x768: hdmi_mode=39
| # 1400x1050: hdmi_mode=42
| # 1440x900: hdmi_mode=47
| # 1600x1200: hdmi_mode=51
| # 1680x1050: hdmi_mode=58
| # 1366x768: hdmi_mode=81
| # 1920x1080: hdmi_mode=82
| # 1920x1200: hdmi_mode=69
| framebuffer_depth=32
| # Uncomment for 16-bit color. It is up to two
| # times faster than default 32-bit.
| #framebuffer_depth=16
| # Enable onboard audio (HDMI or jack).
| dtparam=audio=on
| # Removes the warning overlay.
| #avoid_warnings=1
| # Additionally allows turbo when low-voltage is present.
| #avoid_warnings=2
\----------------------------------------------------
[ KERNEL] [ 3.772416] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ KERNEL] [ 3.902640] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ KERNEL] [ 3.902652] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ KERNEL] [ 4.002409] usb 1-1.2: new full-speed USB device number 4 using dwc_otg
[ KERNEL] [ 4.138075] usb 1-1.2: New USB device found, idVendor=0529, idProduct=0620
[ KERNEL] [ 4.138087] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ KERNEL] [ 4.138095] usb 1-1.2: Product: Token JC
[ KERNEL] [ 4.138103] usb 1-1.2: Manufacturer: Aladdin
[ KERNEL] [ 4.232416] usb 1-1.3: new full-speed USB device number 5 using dwc_otg
[ KERNEL] [ 4.367326] usb 1-1.3: New USB device found, idVendor=046d, idProduct=c534
[ KERNEL] [ 4.367338] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ KERNEL] [ 4.367346] usb 1-1.3: Product: USB Receiver
[ KERNEL] [ 4.367353] usb 1-1.3: Manufacturer: Logitech
[ KERNEL] [ 4.374495] input: Logitech USB Receiver as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.0/0003:046D:C534.0001/input/input0
[ KERNEL] [ 4.443588] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-3f980000.usb-1.3/input0
[ KERNEL] [ 4.453190] input: Logitech USB Receiver as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.1/0003:046D:C534.0002/input/input1
[ KERNEL] [ 4.533070] hid-generic 0003:046D:C534.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-3f980000.usb-1.3/input1
[ initrd] [ 4.811550] Cache package files: auto.
[ initrd] [ 4.811686] WTpassword empty.
[ initrd] [ 4.815031] Cache package files.
[ initrd] [ 4.889023] USB: 046d:c534 Logitech, Inc. Unifying Receiver.
[ initrd] [ 4.889116] USB: 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter.
[ initrd] [ 4.889155] USB: 0424:9514 Standard Microsystems Corp. SMC9514 Hub.
[ initrd] [ 4.889189] USB: 0529:0620 Aladdin Knowledge Systems Token JC.
/--- FILE "/bootmedia/configs/initrd.wtc" -----------------------
| clientIP = *
| config = network
\----------------------------------------------------
[ initrd] [ 6.844552] Load ethernet drivers.
[ initrd] [ 6.844598] modprobe lan78xx.
[ KERNEL] [ 6.852815] usbcore: registered new interface driver lan78xx
[ initrd] [ 6.851290] modprobe smsc95xx.
[ KERNEL] [ 6.861369] smsc95xx v1.0.6
[ KERNEL] [ 6.945618] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:8d:78:ff
[ KERNEL] [ 6.946001] usbcore: registered new interface driver smsc95xx
[ KERNEL] [ 7.044267] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ KERNEL] [ 8.527446] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1
[ initrd] [ 8.545556] WTpassword empty.
[ initrd] [ 9.750189] dhcp: 342 bytes from 192.168.74.1.
[ initrd] [ 9.750311] 00000000:000001420000000000110000C0A84A01C0A84AE4004300440142000002010600 ...B.........J...J..C.D.B......
[ initrd] [ 9.750384] 00000020:67458B6B0000000000000000C0A84AE4C0A84A0100000000B827EB8D78FF0000 gE.k..........J...J......'..x...
[ initrd] [ 9.750454] 00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 9.750543] 00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 9.750613] 00000080:00000000000000007774776172652E7078650000000000000000000000000000 ........wtware.pxe..............
[ initrd] [ 9.750681] 000000a0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 9.750749] 000000c0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 9.750817] 000000e0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 9.750885] 00000100:0000000000000000638253633501023604C0A84A0133040003F4800104FFFFFF ........c.Sc5..6...J.3..........
[ initrd] [ 9.750953] 00000120:000304C0A84A010604C0A84A0112203261353665323932666539386136646331 .....J.....J. 2a56e292fe98a6dc1
[ initrd] [ 9.751021] 00000140:3666623230626634643330643435372A04C0A84A01FF 6fb20bf4d30d457*...J..
[ initrd] [ 10.910303] dhcp: 342 bytes from 192.168.74.1.
[ initrd] [ 10.910401] 00000000:000001420000000000110000C0A84A01C0A84AE4004300440142000002010600 ...B.........J...J..C.D.B......
[ initrd] [ 10.910471] 00000020:67458B6B0000000000000000C0A84AE4C0A84A0100000000B827EB8D78FF0000 gE.k..........J...J......'..x...
[ initrd] [ 10.910541] 00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 10.910610] 00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 10.910678] 00000080:00000000000000007774776172652E7078650000000000000000000000000000 ........wtware.pxe..............
[ initrd] [ 10.910746] 000000a0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 10.910815] 000000c0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 10.910883] 000000e0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 10.910950] 00000100:0000000000000000638253633501053604C0A84A0133040003F4800104FFFFFF ........c.Sc5..6...J.3..........
[ initrd] [ 10.911018] 00000120:000304C0A84A010604C0A84A0112203261353665323932666539386136646331 .....J.....J. 2a56e292fe98a6dc1
[ initrd] [ 10.911086] 00000140:3666623230626634643330643435372A04C0A84A01FF 6fb20bf4d30d457*...J..
[ initrd] [ 10.950096] [DHCP] DHCP server address 192.168.74.1.
[ initrd] [ 10.950172] [DHCP] IP 192.168.74.228 mask 255.255.255.0.
[ initrd] [ 10.950241] [DHCP] Default gateway 192.168.74.1.
[ initrd] [ 10.950308] [DHCP] DNS 192.168.74.1.
[ initrd] [ 10.950377] [DHCP] NTP 192.168.74.1.
[ initrd] [ 10.950443] [DHCP] TFTP from siaddr 192.168.74.1.
[ initrd] [ 10.950511] [DHCP] TFTP 192.168.74.1.
[ initrd] [ 10.950577] [DHCP] Boot file (header) wtware.pxe.
[ initrd] [ 10.950645] [DHCP] TFTP binary "", configs prefix "", using "/" slash.
[ initrd] [ 10.950713] [DHCP] WTPassword hash 2a56e292fe98a6dc16fb20bf4d30d457.
WTC listener is active.
WTC broadcast listener is active.
Send broadcast WTCU discover.
[ pfac] [ 10.952868] Run /sbin/httpd.
[ initrd] [ 10.952951] Run '/sbin/httpd', log '/tmp/httpd.out', env '', pid ''.
[ pfac] [ 10.953051] Ok, PID 696.
[ initrd] [ 10.953099] [TFTP] Download config file Everyone/list.wtc from 192.168.74.1.
[ initrd] [ 10.954918] [TFTP] It is not WTware5 TFTP server.
[ httpd] [ 10.957346] HTTP Server, WTware 5.8.26/RPi
[ initrd] [ 10.957761] My line in list.wtc: "(Rogozina@Rogozina_Dnch) Tokens SndRbJ ChrSrv Tail".
[ initrd] [ 10.957883] Set username to Rogozina.
[ initrd] [ 10.957981] Set hostname to Rogozina_Dnch.
[ initrd] [ 10.958065] [TFTP] Download config file ListIncludes/Tokens from 192.168.74.1.
/--- FILE "/tmp/list.wtc.tmp" -----------------------
| [BOM]
| smartcard = etoken,rutoken,ibank2_blue,trustscreen,angara
| #etoken, jacarta, ibank2_blue, trustscreen
| #smartcard = jacarta, ibank2_blue, multisoft
| #smartcard = etoken, ibank2_blue, multisoft
| #smartcard = etoken, ibank2_blue, rutoken
\----------------------------------------------------
[ initrd] [ 10.960869] [TFTP] Download config file ListIncludes/SndRbJ from 192.168.74.1.
/--- FILE "/tmp/list.wtc.tmp" -----------------------
| [BOM]
| sound = on, amixer:cset numid=3 1
\----------------------------------------------------
[ initrd] [ 10.963287] [TFTP] Download config file ListIncludes/ChrSrv from 192.168.74.1.
/--- FILE "/tmp/list.wtc.tmp" -----------------------
| [BOM]
| connection
| application=chrome
| chrome_mode=window
| #chrome_profile=chprf-Natasha.zip
| chrome_url=https://www.yandex.ru/
| sound = on
| next screen
| server=192.168.200.70
| graphic = f
| disk = usb
\----------------------------------------------------
[ initrd] [ 10.965829] [TFTP] Download config file ListIncludes/Tail from 192.168.74.1.
/--- FILE "/tmp/list.wtc.tmp" -----------------------
| [BOM]
| next screen
| turnoffmenu=on #,msg:Выключить компьютер
| displayname=Консультант
| server=192.168.200.5
| user = Alliance:5421
| shell=c:\Users\Public\Consultant\cons.exe
| directory=c:\Users\Alliance\AppData\Roaming\ConsUserData
| connection
| displayname=Интернет-браузер Chromium
| application=chrome
| chrome_mode=window
| #chrome_profile=chprf-Natasha.zip
| chrome_url=https://www.yandex.ru/
| chrome_pac=http://192.168.200.175/proxy.pac
| sound = on
| #chrome_share = \\192.168.55.100\sharename,user vasja,password coolpass
| connection
| displayname=Трассир
| server=192.168.70.150
| user = Администратор
| connection
| displayname=Подключение к другому серверу
| server=--new--
\----------------------------------------------------
[ initrd] [ 10.968967] [TFTP] Download config file Terminals/B8.27.EB.8D.78.FF/config.wtc from 192.168.74.1.
[ KERNEL] [ 10.971809] random: httpd: uninitialized urandom read (32 bytes read)
[ initrd] [ 10.970977] [TFTP] Error code 1: file not found.
[ initrd] [ 10.971107] [TFTP] Download config file Terminals/Rogozina_Dnch.wtc from 192.168.74.1.
[ initrd] [ 10.973704] [TFTP] Error code 1: file not found.
[ initrd] [ 10.973779] [TFTP] Download config file Terminals/B8.27.EB.8D.78.FF.wtc from 192.168.74.1.
[ initrd] [ 10.975330] [TFTP] Error code 1: file not found.
[ initrd] [ 10.975370] [TFTP] Download config file Everyone/all.wtc from 192.168.74.1.
/--- FILE "/tmp/all.wtc" -----------------------
| [BOM]
Skip 'CLID'.
| server=192.168.200.70
| sound = on
| sound_level = 100
| smartcard = etoken; ibank2_blue; rutoken
| disk = usb
| turnoffmenu = always
| keyboard = ru
| language = ru, default
| keyswitch=alt-shift
| graphic = a
| redraw_delay = 50
| infobox = rctrl
| sleep = 20,standby
| autoshutdown = 45
| vnc = on
\----------------------------------------------------
[ initrd] [ 10.977920] [TFTP] Download config file Everyone/wtware.lic from 192.168.74.1.
[ initrd] [ 10.982790] Remount /bootmedia for writing.
[ initrd] [ 10.989068] Remount /bootmedia as read-only.
/--- FILE "/etc/config.compiled" -----------------------
| [BOM]
Skip 'CLID'.
| server=192.168.200.70
| sound=on, amixer:cset numid=3 1
| sound_level=100
| smartcard=etoken,rutoken,ibank2_blue,trustscreen,angara
| disk=usb
| turnoffmenu=on
| keyboard=ru
| language=ru, default
| keyswitch=alt-shift
| graphic=a
| redraw_delay=50
| infobox=rctrl
| sleep=20,standby
| autoshutdown=45
| vnc=on
| user=Rogozina
| connection
| application=chrome
| chrome_mode=window
| chrome_url=https://www.yandex.ru/
| sound=on
| next screen
| connection
| server=192.168.200.70
| graphic=f
| disk=usb
| next screen
| connection
| displayName=Консультант
| server=192.168.200.5
| user=Alliance:5421
| shell=c:\Users\Public\Consultant\cons.exe
| directory=c:\Users\Alliance\AppData\Roaming\ConsUserData
| connection
| displayName=Интернет-браузер Chromium
| application=chrome
| chrome_mode=window
| chrome_url=https://www.yandex.ru/
| chrome_pac=http://192.168.200.175/proxy.pac
| sound=on
| connection
| displayName=Трассир
| server=192.168.70.150
| user=Администратор
| connection
| displayName=Подключение к другому серверу
| server=--new--
\----------------------------------------------------
[ initrd] [ 11.029445] Hostname: "Rogozina_Dnch".
[ initrd] [ 11.300660] Run '/bin/sh /tmp/ntpdate', log '/tmp/ntp.out', env '', pid ''.
[ pfac] [ 11.300775] Run /bin/sh /tmp/ntpdate.
Everyone can control terminal by RSH.
RSH: listener is active.
Send broadcast WTCU discover.
[ pfac] [ 11.306037] Ok, PID 698.
[ httpd] [ 11.306768] Reread settings.
[ httpd] [ 11.306890] Everyone can control terminal by HTTP.
[ NTP] [ 11.307562] ntpd: sending query to 192.168.74.1
[ NTP] [ 11.309153] ntpd: reply from 192.168.74.1: offset:+1761935.052026 delay:0.002000 status:0x24 strat:2 refid:0x18fb6d59 rootdelay:0.018769 reach:0x01
[ initrd] [ 11.362029] [FILE CACHE] Take 'packages/pi2-u' from cache.
[ initrd] [ 11.374769] [FILE CACHE] Take 'packages/pi2-dbus' from cache.
[ initrd] [ 11.374846] +--- Executing "/usr/bin/dbus-uuidgen --ensure"
[ initrd] [ 11.413028] +- Errorlevel: 0, output:
[ KERNEL] [ 11.413771] random: dbus-uuidgen: uninitialized urandom read (12 bytes read)
[ KERNEL] [ 11.413830] random: dbus-uuidgen: uninitialized urandom read (8 bytes read)
File is empty.
[ initrd] [ 11.413423] +------------------------
[ initrd] [ 11.413500] +--- Executing "/usr/bin/dbus-daemon --system"
[ initrd] [ 11.480180] +- Errorlevel: 0, output:
File is empty.
[ initrd] [ 11.480378] +------------------------
[ gm] [ 11.529381] WTware 5.8.26/RPi session manager.
[ gm] [ 11.546980] [FILE CACHE] '/var/lib/dbus/machine-id' already exist.
[ gm] [ 11.547058] [FILE CACHE] Take 'packages/ufont' from cache.
[ gm] [ 11.565443] [FILE CACHE] Take 'packages/pi2-uetc' from cache.
[ gm] [ 11.576607] [FILE CACHE] Take 'packages/pi2-xml2' from cache.
[ NTP] [ 12.310296] ntpd: sending query to 192.168.74.1
[ NTP] [ 12.312465] ntpd: reply from 192.168.74.1: offset:+1761935.051976 delay:0.002000 status:0x24 strat:2 refid:0x18fb6d59 rootdelay:0.018769 reach:0x03
[ pfac] [ 12.420237] Process pid 698 terminated, status 00000000.
[ NTP] [ 12.420399] ntpd: setting time to 2018-09-19 09:25:44.189675 (offset +1761935.051976s)
[ NTP] [ 12.420438] hwclock: can't open '/dev/misc/rtc': No such file or directory
[ gm] [ 15.061281] Add keyboard event1: Logitech USB Receiver.
[ gm] [ 15.061539] Add keyboard event0: Logitech USB Receiver.
[ gm] [ 15.061836] Display mode: 1920x1080, 32 bit, landscape, 0 Hz, modeline "", DDC enabled, connector 0.
[ gm] [ 15.066349] WTware concurrent licensing servers:
[ gm] [ 15.066479] 212.71.233.220
[ gm] [ 15.066563] 213.178.34.233
[ gm] [ 15.066638] 178.163.104.69
[ gm] [ 15.066709] 88.200.173.252
[ KERNEL] [ 15.187539] urandom_read: 2 callbacks suppressed
[ KERNEL] [ 15.187542] random: gm: uninitialized urandom read (2 bytes read)
[ gm] [ 15.485185] 178.163.104.69 0
[ gm] [ 15.485250] 00000000:485454502F312E3120323030204F4B0D0A5365727665723A206E67696E782F31 HTTP/1.1 200 OK..Server: nginx/1
[ gm] [ 15.485293] 00000020:2E31302E330D0A446174653A205765642C203139205365702032303138203039 .10.3..Date: Wed, 19 Sep 2018 09
[ gm] [ 15.485347] 00000040:3A32353A343720474D540D0A436F6E74656E742D547970653A206170706C6963 :25:47 GMT..Content-Type: applic
[ gm] [ 15.485385] 00000060:6174696F6E2F782D7777772D666F726D2D75726C656E636F6465640D0A436F6E ation/x-www-form-urlencoded..Con
[ gm] [ 15.485424] 00000080:6E656374696F6E3A20636C6F73650D0A416C6C6F773A204745542C20504F5354 nection: close..Allow: GET, POST
[ gm] [ 15.485462] 000000a0:2C20484541440D0A0D0A46393031374433443241323144324139354230353137 , HEAD....F9017D3D2A21D2A95B0517
[ gm] [ 15.485499] 000000c0:4542463539453842393442323042443541463438383342424635393236433732 EBF59E8B94B20BD5AF4883BBF5926C72
[ gm] [ 15.485537] 000000e0:4434353738303937323633333230424645414246463141423237464342314142 D4578097263320BFEABFF1AB27FCB1AB
[ gm] [ 15.485576] 00000100:3931324443353139444246433741363935413936354337384434433633394338 912DC519DBFC7A695A965C78D4C639C8
[ gm] [ 15.485616] 00000120:4131434630443039383631463030434130334445363943344135424537323135 A1CF0D09861F00CA03DE69C4A5BE7215
[ gm] [ 15.485655] 00000140:3733363230343746423042363932424530423245424643383433333434373436 7362047FB0B692BE0B2EBFC843344746
[ gm] [ 15.485694] 00000160:4135463243393730453141343341393531313643324541433730423837373736 A5F2C970E1A43A95116C2EAC70B87776
[ gm] [ 15.485734] 00000180:3934433246343241343537324634433437354430413932463933423141453746 94C2F42A4572F4C475D0A92F93B1AE7F
[ gm] [ 15.485772] 000001a0:3941333132344630434539323342344545353746303039373637444133384246 9A3124F0CE923B4EE57F009767DA38BF
[ gm] [ 15.485810] 000001c0:41384530313942444641 A8E019BDFA
/--- FILE "/etc/xorg.conf" -----------------------
| Section "InputDevice"
| Identifier "Keyboard0"
| Driver "evdev"
| Option "Device" "/dev/input/event1"
| Option "SendCoreEvents" "on"
| Option "XkbLayout" "ru,us"
| Option "XkbRules" "evdev"
| Option "XkbOptions" "grp:alt_shift_toggle"
| EndSection
| Section "InputDevice"
| Identifier "Keyboard1"
| Driver "evdev"
| Option "Device" "/dev/input/event0"
| Option "SendCoreEvents" "on"
| Option "XkbLayout" "ru,us"
| Option "XkbRules" "evdev"
| Option "XkbOptions" "grp:alt_shift_toggle"
| EndSection
| Section "ServerFlags"
| Option "DontVTSwitch" "on"
| Option "DontZoom" "on"
| Option "DontZap" "on"
| Option "NoPM" "on"
| Option "AutoAddDevices" "off"
| EndSection
| Section "Device"
| Identifier "Video0"
| Driver "fbturbo"
| EndSection
| Section "Monitor"
| Identifier "Monitor0"
| HorizSync 20-200
| VertRefresh 50-60
| Option "PreferredMode" "1920x1080"
| EndSection
| Section "Screen"
| Identifier "Screen0"
| Device "Video0"
| Monitor "Monitor0"
| DefaultDepth 24
| SubSection "Display"
| Depth 24
| Modes "1920x1080"
| Virtual 1920 1080
| EndSubSection
| EndSection
| Section "ServerLayout"
| Identifier "Layout"
| Screen "Screen0"
| InputDevice "Keyboard0"
| InputDevice "Keyboard1"
| EndSection
\----------------------------------------------------
[ gm] [ 15.486197] Run '/usr/lib/xorg/Xorg -nolisten inet6 -s 0 -quiet -logfile /tmp/Xorg.0.log', log '/tmp/Xorg.out', env '', pid ''.
[ pfac] [ 15.486281] Run /usr/lib/xorg/Xorg -nolisten inet6 -s 0 -quiet -logfile /tmp/Xorg.0.log.
[ pfac] [ 15.486445] Ok, PID 711.
[ X] [ 15.606955] [ 15.606]
[ X] [ 15.607027] X.Org X Server 1.19.2
[ X] [ 15.607061] Release Date: 2017-03-02
[ X] [ 15.607092] [ 15.606] X Protocol Version 11, Revision 0
[ X] [ 15.607167] [ 15.606] Build Operating System: Linux 4.9.41-v7+ armv7l Raspbian
[ X] [ 15.607208] [ 15.606] Current Operating System: Linux wtware 4.14.67 #3 SMP Thu Aug 30 19:20:27 UTC 2018 armv7l
[ X] [ 15.607273] [ 15.607] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbdepth=32 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 quiet wtboot=mmc
[ X] [ 15.607308] [ 15.607] Build Date: 18 October 2017 04:55:30PM
[ X] [ 15.607367] [ 15.607] xorg-server 2:1.19.2-1+rpt1+deb9u2 (https://www.debian.org/support)
[ X] [ 15.607415] [ 15.607] Current version of pixman: 0.34.0
[ X] [ 15.607448] [ 15.607] Before reporting problems, check http://wiki.x.org
[ X] [ 15.607479] to make sure that you have the latest version.
[ X] [ 15.607522] [ 15.607] Markers: (--) probed, (**) from config file, (==) default setting,
[ X] [ 15.607565] (++) from command line, (!!) notice, (II) informational,
[ X] [ 15.607601] (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ X] [ 15.607659] [ 15.607] (++) Log file: "/tmp/Xorg.0.log", Time: Wed Sep 19 09:25:47 2018
[ X] [ 15.607798] [ 15.607] (==) Using config file: "/etc/xorg.conf"
[ X] [ 15.608520] [ 15.608] (==) ServerLayout "Layout"
[ X] [ 15.608558] [ 15.608] (**) |-->Screen "Screen0" (0)
[ X] [ 15.608613] [ 15.608] (**) | |-->Monitor "Monitor0"
[ X] [ 15.615265] [ 15.615] (**) | |-->Device "Video0"
[ X] [ 15.615342] [ 15.615] (**) |-->Input Device "Keyboard0"
[ X] [ 15.615376] [ 15.615] (**) |-->Input Device "Keyboard1"
[ X] [ 15.615432] [ 15.615] (**) Option "DontVTSwitch" "on"
[ X] [ 15.615464] [ 15.615] (**) Option "DontZap" "on"
[ X] [ 15.615495] [ 15.615] (**) Option "DontZoom" "on"
[ X] [ 15.615548] [ 15.615] (**) Option "NoPM" "on"
[ X] [ 15.615603] [ 15.615] (**) Option "AutoAddDevices" "off"
[ X] [ 15.615660] [ 15.615] (**) Not automatically adding devices
[ X] [ 15.615693] [ 15.615] (==) Automatically enabling devices
[ X] [ 15.615752] [ 15.615] (==) Automatically adding GPU devices
[ X] [ 15.615785] [ 15.615] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ X] [ 15.615840] [ 15.615] (WW) The directory "/usr/share/fonts/X11/misc" does not exist.
[ X] [ 15.615874] [ 15.615] Entry deleted from font path.
[ X] [ 15.615928] [ 15.615] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ X] [ 15.615961] [ 15.615] Entry deleted from font path.
[ X] [ 15.615992] [ 15.615] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ X] [ 15.616048] [ 15.615] Entry deleted from font path.
[ X] [ 15.616082] [ 15.615] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ X] [ 15.616112] [ 15.615] Entry deleted from font path.
[ X] [ 15.616143] [ 15.615] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
[ X] [ 15.616174] [ 15.616] Entry deleted from font path.
[ X] [ 15.616228] [ 15.616] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ X] [ 15.616261] [ 15.616] Entry deleted from font path.
[ X] [ 15.616291] [ 15.616] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ X] [ 15.616322] [ 15.616] Entry deleted from font path.
[ X] [ 15.616351] [ 15.616] (==) FontPath set to:
[ X] [ 15.616381] built-ins
[ X] [ 15.616410] [ 15.616] (==) ModulePath set to "/usr/lib/xorg/modules"
[ X] [ 15.616465] [ 15.616] (==) |-->Input Device "Keyboard0"
[ X] [ 15.616498] [ 15.616] (==) |-->Input Device "<default keyboard>"
[ X] [ 15.616529] [ 15.616] (==) The core pointer device wasn't specified explicitly in the layout.
[ X] [ 15.616577] Using the first mouse device.
[ X] [ 15.616607] [ 15.616] (==) The core keyboard device wasn't specified explicitly in the layout.
[ X] [ 15.616637] Using the default keyboard configuration.
[ X] [ 15.618279] [ 15.618] (II) Loader magic: 0x1fbf40
[ X] [ 15.618315] [ 15.618] (II) Module ABI versions:
[ X] [ 15.618373] [ 15.618] X.Org ANSI C Emulation: 0.4
[ X] [ 15.618422] [ 15.618] X.Org Video Driver: 23.0
[ X] [ 15.618477] [ 15.618] X.Org XInput driver : 24.1
[ X] [ 15.618513] [ 15.618] X.Org Server Extension : 10.0
[ X] [ 15.621430] [ 15.621] (--) using VT number 2
[ X] [ 15.621519] [ 15.621] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ KERNEL] [ 15.623885] random: Xorg: uninitialized urandom read (16 bytes read)
[ X] [ 15.622127] [ 15.622] (II) no primary bus or device found
[ X] [ 15.623426] [ 15.622] (II) LoadModule: "glx"
[ X] [ 15.624222] [ 15.624] (WW) Warning, couldn't open module glx
[ X] [ 15.624286] [ 15.624] (II) UnloadModule: "glx"
[ X] [ 15.624319] [ 15.624] (II) Unloading glx
[ X] [ 15.624349] [ 15.624] (EE) Failed to load module "glx" (module does not exist, 0)
[ X] [ 15.624403] [ 15.624] (II) LoadModule: "fbturbo"
[ X] [ 15.624622] [ 15.624] (II) Loading /usr/lib/xorg/modules/drivers/fbturbo_drv.so
[ X] [ 15.632385] [ 15.632] (II) Module fbturbo: vendor="X.Org Foundation"
[ X] [ 15.632449] [ 15.632] compiled for 1.19.2, module version = 0.5.1
[ X] [ 15.632514] [ 15.632] Module class: X.Org Video Driver
[ X] [ 15.632548] [ 15.632] ABI class: X.Org Video Driver, version 23.0
[ X] [ 15.632578] [ 15.632] (II) LoadModule: "evdev"
[ X] [ 15.632747] [ 15.632] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ X] [ 15.642939] [ 15.642] (II) Module evdev: vendor="X.Org Foundation"
[ X] [ 15.643011] [ 15.642] compiled for 1.19.0, module version = 2.10.5
[ X] [ 15.643079] [ 15.642] Module class: X.Org XInput Driver
[ X] [ 15.643112] [ 15.642] ABI class: X.Org XInput driver, version 24.1
[ X] [ 15.643143] [ 15.642] (II) LoadModule: "kbd"
[ X] [ 15.643626] [ 15.643] (WW) Warning, couldn't open module kbd
[ X] [ 15.643689] [ 15.643] (II) UnloadModule: "kbd"
[ X] [ 15.643722] [ 15.643] (II) Unloading kbd
[ X] [ 15.643752] [ 15.643] (EE) Failed to load module "kbd" (module does not exist, 0)
[ X] [ 15.643808] [ 15.643] (II) FBTURBO: driver for framebuffer: fbturbo
[ X] [ 15.663988] [ 15.663] (WW) Falling back to old probe method for fbturbo
[ X] [ 15.664050] [ 15.663] (II) Loading sub module "fbdevhw"
[ X] [ 15.664087] [ 15.663] (II) LoadModule: "fbdevhw"
[ X] [ 15.664251] [ 15.664] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ X] [ 15.666119] [ 15.666] (II) Module fbdevhw: vendor="X.Org Foundation"
[ X] [ 15.666147] [ 15.666] compiled for 1.19.2, module version = 0.0.2
[ X] [ 15.666178] [ 15.666] ABI class: X.Org Video Driver, version 23.0
[ X] [ 15.666290] [ 15.666] (II) FBTURBO(0): using default device
[ X] [ 15.666322] [ 15.666] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ X] [ 15.666393] [ 15.666] (**) FBTURBO(0): Depth 24, (--) framebuffer bpp 32
[ X] [ 15.666423] [ 15.666] (==) FBTURBO(0): RGB weight 888
[ X] [ 15.666439] [ 15.666] (==) FBTURBO(0): Default visual is TrueColor
[ X] [ 15.666478] [ 15.666] (==) FBTURBO(0): Using gamma correction (1.0, 1.0, 1.0)
[ X] [ 15.666495] [ 15.666] (II) FBTURBO(0): hardware: BCM2708 FB (video memory: 8100kB)
[ X] [ 15.666800] [ 15.666] (II) FBTURBO(0): processor: Unknown
[ X] [ 15.666830] [ 15.666] (II) FBTURBO(0): checking modes against framebuffer device...
[ X] [ 15.666881] [ 15.666] (II) FBTURBO(0): mode "1920x1080" ok
[ X] [ 15.666911] [ 15.666] (II) FBTURBO(0): checking modes against monitor...
[ X] [ 15.666940] [ 15.666] (--) FBTURBO(0): Virtual size is 1920x1080 (pitch 1920)
[ X] [ 15.666957] [ 15.666] (**) FBTURBO(0): Built-in mode "current"
[ X] [ 15.666984] [ 15.666] (==) FBTURBO(0): DPI set to (96, 96)
[ X] [ 15.667001] [ 15.666] (II) Loading sub module "fb"
[ X] [ 15.667029] [ 15.666] (II) LoadModule: "fb"
[ X] [ 15.667141] [ 15.667] (II) Loading /usr/lib/xorg/modules/libfb.so
[ X] [ 15.672315] [ 15.672] (II) Module fb: vendor="X.Org Foundation"
[ X] [ 15.672357] [ 15.672] compiled for 1.19.2, module version = 1.0.0
[ X] [ 15.672389] [ 15.672] ABI class: X.Org ANSI C Emulation, version 0.4
[ X] [ 15.672410] [ 15.672] (==) Depth 24 pixmap format is 32 bpp
[ X] [ 15.685564] [ 15.685] (II) FBTURBO(0): using backing store heuristics
[ X out] [ 15.689166] modprobe: module g2d_23 not found in modules.dep
[ X] [ 15.689371] [ 15.689] (II) FBTURBO(0): can't load 'g2d_23' kernel module
[ X] [ 15.689444] [ 15.689] (II) FBTURBO(0): failed to enable the use of sunxi display controller
[ X] [ 15.689486] [ 15.689] (II) FBTURBO(0): No sunxi-g2d hardware detected (check /dev/disp and /dev/g2d)
[ X] [ 15.689517] [ 15.689] (II) FBTURBO(0): G2D hardware acceleration can't be enabled
[ X] [ 15.689534] [ 15.689] (II) FBTURBO(0): enabled fbdev copyarea acceleration
[ X] [ 15.689573] [ 15.689] (==) FBTURBO(0): Backing store enabled
[ X] [ 15.698236] [ 15.698] (==) FBTURBO(0): DPMS enabled
[ X] [ 15.698317] [ 15.698] (II) FBTURBO(0): failed to enable hardware cursor
[ X] [ 15.698361] [ 15.698] (II) FBTURBO(0): no 3D acceleration because the driver has been compiled without libUMP
[ X] [ 15.698395] [ 15.698] (II) FBTURBO(0): if this is wrong and needs to be fixed, please check ./configure log
[ X] [ 15.699694] [ 15.699] (==) RandR enabled
[ X] [ 15.734136] [ 15.734] (II) SELinux: Disabled on system
[ X] [ 15.905648] [ 15.905] (II) Using input driver 'evdev' for 'Keyboard0'
[ X] [ 15.905727] [ 15.905] (**) Option "SendCoreEvents" "on"
[ X] [ 15.905777] [ 15.905] (**) Option "CorePointer" "on"
[ X] [ 15.905795] [ 15.905] (**) Keyboard0: always reports core events
[ X] [ 15.905811] [ 15.905] (**) evdev: Keyboard0: Device: "/dev/input/event1"
[ X] [ 15.906025] [ 15.905] (--) evdev: Keyboard0: Vendor 0x46d Product 0xc534
[ X] [ 15.906056] [ 15.906] (--) evdev: Keyboard0: Found 20 mouse buttons
[ X] [ 15.906073] [ 15.906] (--) evdev: Keyboard0: Found scroll wheel(s)
[ X] [ 15.906089] [ 15.906] (--) evdev: Keyboard0: Found relative axes
[ X] [ 15.906117] [ 15.906] (--) evdev: Keyboard0: Found x and y relative axes
[ X] [ 15.906133] [ 15.906] (--) evdev: Keyboard0: Found absolute axes
[ X] [ 15.906149] [ 15.906] (II) evdev: Keyboard0: Forcing absolute x/y axes to exist.
[ X] [ 15.906165] [ 15.906] (--) evdev: Keyboard0: Found keys
[ X] [ 15.906192] [ 15.906] (II) evdev: Keyboard0: Configuring as mouse
[ X] [ 15.906221] [ 15.906] (II) evdev: Keyboard0: Configuring as keyboard
[ X] [ 15.906237] [ 15.906] (II) evdev: Keyboard0: Adding scrollwheel support
[ X] [ 15.906265] [ 15.906] (**) evdev: Keyboard0: YAxisMapping: buttons 4 and 5
[ X] [ 15.906282] [ 15.906] (**) evdev: Keyboard0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ X] [ 15.906312] [ 15.906] (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD, id 6)
[ X] [ 15.906328] [ 15.906] (**) Option "xkb_rules" "evdev"
[ X] [ 15.906356] [ 15.906] (**) Option "xkb_layout" "ru,us"
[ X] [ 15.906372] [ 15.906] (**) Option "xkb_options" "grp:alt_shift_toggle"
[ X] [ 16.000266] [ 16.000] (II) evdev: Keyboard0: initialized for relative axes.
[ X] [ 16.000312] [ 16.000] (WW) evdev: Keyboard0: ignoring absolute axes.
[ X] [ 16.000905] [ 16.000] (**) Keyboard0: (accel) keeping acceleration scheme 1
[ X] [ 16.000936] [ 16.000] (**) Keyboard0: (accel) acceleration profile 0
[ X] [ 16.000988] [ 16.000] (**) Keyboard0: (accel) acceleration factor: 2.000
[ X] [ 16.001006] [ 16.000] (**) Keyboard0: (accel) acceleration threshold: 4
[ X] [ 16.001211] [ 16.001] (II) Using input driver 'evdev' for 'Keyboard1'
[ X] [ 16.001242] [ 16.001] (**) Option "SendCoreEvents" "on"
[ X] [ 16.001270] [ 16.001] (**) Keyboard1: always reports core events
[ X] [ 16.001298] [ 16.001] (**) evdev: Keyboard1: Device: "/dev/input/event0"
[ X] [ 16.001415] [ 16.001] (--) evdev: Keyboard1: Vendor 0x46d Product 0xc534
[ X] [ 16.001445] [ 16.001] (--) evdev: Keyboard1: Found keys
[ X] [ 16.001463] [ 16.001] (II) evdev: Keyboard1: Configuring as keyboard
[ X] [ 16.001490] [ 16.001] (II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD, id 7)
[ X] [ 16.001508] [ 16.001] (**) Option "xkb_rules" "evdev"
[ X] [ 16.001535] [ 16.001] (**) Option "xkb_layout" "ru,us"
[ X] [ 16.001552] [ 16.001] (**) Option "xkb_options" "grp:alt_shift_toggle"
[ X] [ 16.002433] [ 16.002] (II) Using input driver 'evdev' for 'Keyboard0'
[ X] [ 16.002463] [ 16.002] (**) Option "SendCoreEvents" "on"
[ X] [ 16.002491] [ 16.002] (**) Option "CorePointer" "on"
[ X] [ 16.002520] [ 16.002] (**) Keyboard0: always reports core events
[ X] [ 16.002536] [ 16.002] (**) evdev: Keyboard0: Device: "/dev/input/event1"
[ X] [ 16.002635] [ 16.002] (WW) evdev: Keyboard0: device file is duplicate. Ignoring.
[ X] [ 16.040138] [ 16.040] (EE) PreInit returned 8 for "Keyboard0"
[ X] [ 16.040204] [ 16.040] (II) UnloadModule: "evdev"
[ X] [ 16.040306] [ 16.040] (II) LoadModule: "kbd"
[ X] [ 16.040843] [ 16.040] (WW) Warning, couldn't open module kbd
[ X] [ 16.040879] [ 16.040] (II) UnloadModule: "kbd"
[ X] [ 16.040934] [ 16.040] (II) Unloading kbd
[ X] [ 16.040967] [ 16.040] (EE) Failed to load module "kbd" (module does not exist, 0)
[ X] [ 16.040998] [ 16.040] (EE) No input driver matching `kbd'
[ X] [ 16.041028] [ 16.040] (II) Falling back to input driver `libinput'
[ X] [ 16.041080] [ 16.040] (II) LoadModule: "libinput"
[ X] [ 16.041552] [ 16.041] (WW) Warning, couldn't open module libinput
[ X] [ 16.041587] [ 16.041] (II) UnloadModule: "libinput"
[ X] [ 16.041643] [ 16.041] (II) Unloading libinput
[ X] [ 16.041676] [ 16.041] (EE) Failed to load module "libinput" (module does not exist, 0)
[ KERNEL] [ 16.044753] random: Xorg: uninitialized urandom read (16 bytes read)
[ gm] [ 16.080385] DPMS enabled.
[ gm] [ 16.080536] Allocate 81920 bytes of shared memory for X imgbuf.
[ gm] [ 16.081431] Use /lib/ui32.so.
[ gm] [ 16.088271] Allocate 8294400 bytes of shared memory for X imgbuf.
[ gm] [ 16.159722] [FILE CACHE] Take 'packages/pi2-alsa' from cache.
[ gm] [ 16.159914] modprobe snd-bcm2835.
[ KERNEL] [ 16.176779] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[ KERNEL] [ 16.178890] bcm2835_alsa bcm2835_alsa: card created with 8 channels
[ gm] [ 16.178385] modprobe snd-usb-audio.
/--- FILE "/proc/asound/devices" -----------------------
| 0: [ 0] : control
| 16: [ 0- 0]: digital audio playback
| 17: [ 0- 1]: digital audio playback
| 33: : timer
\----------------------------------------------------
[ KERNEL] [ 16.193381] usbcore: registered new interface driver snd-usb-audio
[ gm] [ 16.192710] /dev/snd/pcmC0D1p character device.
[ gm] [ 16.192881] /dev/snd/pcmC0D0p character device.
[ gm] [ 16.192965] /dev/snd/controlC0 character device.
[ gm] [ 16.193034] /dev/snd/timer character device.
[ gm] [ 16.193153] Preconfigure ALSA.
[ gm] [ 16.193228] +--- Executing "/usr/bin/amixer cset numid=3 1"
[ gm] [ 16.230572] +- Errorlevel: 0, output:
| numid=3,iface=MIXER,name='PCM Playback Route'
| ; type=INTEGER,access=rw------,values=1,min=0,max=2,step=0
| : values=1
[ gm] [ 16.230871] +------------------------
[ gm] [ 16.230942] Run '/sbin/rdpsnd sndvol 100 100 50', log '', env '', pid ''.
[ pfac] [ 16.231078] Run /sbin/rdpsnd sndvol 100 100 50.
[ pfac] [ 16.231295] Ok, PID 747.
[ gm] [ 16.231482] Run sound daemon.
[ gm] [ 16.231553] Run '/sbin/rdpsnd 1 0 100 0 -1', log '', env '', pid ''.
[ pfac] [ 16.231654] Run /sbin/rdpsnd 1 0 100 0 -1.
[ pfac] [ 16.231818] Ok, PID 748.
[ gm] [ 16.231969] Only one RDP session can use sound redirection.
[ gm] [ 16.232032] Turn it off for at display 0 screen 1.
[ gm] [ 16.232143] Only one RDP session can use sound redirection.
[ gm] [ 16.232207] Turn it off for at display 0 screen 2.
[ gm] [ 16.232316] Only one RDP session can use sound redirection.
[ gm] [ 16.232378] Turn it off for at display 0 screen 2.
[ gm] [ 16.232488] Only one RDP session can use sound redirection.
[ gm] [ 16.232552] Turn it off for at display 0 screen 2.
[ gm] [ 16.232655] Only one RDP session can use sound redirection.
[ gm] [ 16.232717] Turn it off for at display 0 screen 2.
[ rdpsnd] [ 16.242002] RDP Sound Redirector, WTware 5.8.26/RPi.
[ gm] [ 16.246477] [FILE CACHE] Take 'packages/pi2-sc' from cache.
[ rdpsnd] [ 16.246522] Card 'ALSA'/'bcm2835 ALSA'.
[ sndvol] [ 16.246548] Card 'ALSA'/'bcm2835 ALSA'.
[ rdpsnd] [ 16.246607] Mixer name: 'Broadcom Mixer'.
[ sndvol] [ 16.246628] Mixer name: 'Broadcom Mixer'.
[ rdpsnd] [ 16.246670] Components: ''.
[ sndvol] [ 16.246692] Components: ''.
[ rdpsnd] [ 16.246730] Controls: 6.
[ sndvol] [ 16.246752] Controls: 6.
[ rdpsnd] [ 16.246790] ALSA: control 'PCM Playback Volume'.
[ sndvol] [ 16.246811] ALSA: control 'PCM Playback Volume'.
[ rdpsnd] [ 16.246849] ALSA: control 'PCM Playback Switch'.
[ sndvol] [ 16.246871] ALSA: control 'PCM Playback Switch'.
[ rdpsnd] [ 16.246911] ALSA: control 'PCM Playback Route'.
[ sndvol] [ 16.246933] ALSA: control 'PCM Playback Route'.
[ rdpsnd] [ 16.246971] ALSA: control 'IEC958 Playback Default'.
[ sndvol] [ 16.246992] ALSA: control 'IEC958 Playback Default'.
[ rdpsnd] [ 16.247030] ALSA: control 'IEC958 Playback Con Mask'.
[ sndvol] [ 16.247062] ALSA: control 'IEC958 Playback Con Mask'.
[ rdpsnd] [ 16.247100] ALSA: control 'IEC958 Playback PCM Stream'.
[ sndvol] [ 16.247131] ALSA: control 'IEC958 Playback PCM Stream'.
[ rdpsnd] [ 16.247170] Inactive control IEC958 Playback PCM Stream'.
[ sndvol] [ 16.247192] Inactive control IEC958 Playback PCM Stream'.
[ gm] [ 16.247352] Run scard daemon. Supported cards:
[ gm] [ 16.247419] eToken 32K, eToken 64K, eToken 72K Java.
[ gm] [ 16.247482] Rutoken, iBank2 A, Rutoken ECP.
[ pfac] [ 16.247613] Process pid 747 terminated, status 00000000.
[ gm] [ 16.247754] iBank2Key blue token (23A0:0002, 23A0:0004).
[ gm] [ 16.247818] BIFIT Trustscreen (23A0:0005).
[ gm] [ 16.247879] BIFIT ANGARA (23a0:0008).
[ gm] [ 16.263324] Run '/sbin/rdpdr[scard] 0', log '/tmp/rdpdr[scard].out', env '', pid ''.
[ gm] [ 16.263624] Load ISO 9660 and UDF CDROM filesystem drivers.
[ pfac] [ 16.263783] Run /sbin/rdpdr[scard] 0.
[ pfac] [ 16.264167] Ok, PID 750.
[ gm] [ 16.264379] modprobe udf.
[ rdpdr-scard] [ 16.274325] RDP Smart Card Redirector, WTware 5.8.26/RPi.
[ gm] [ 16.276375] modprobe isofs.
[ rdpdr-scard] [ 16.278770] Load /usr/lib/pcsc/drivers/ifd-ccid.bundle/Contents/Linux/libccid.so library.
[ gm] [ 16.288496] Load usb storage driver.
[ gm] [ 16.288729] modprobe scsi_mod.
[ gm] [ 16.298642] modprobe usb-storage.
[ KERNEL] [ 16.299812] SCSI subsystem initialized
[ hpsc] [ 16.307149] [HPSC] eToken 72K Java.
[ KERNEL] [ 16.309250] usbcore: registered new interface driver usb-storage
[ gm] [ 16.307747] modprobe sd_mod.
[ hpsc] [ 16.308324] [HPSC] Unknown action "bind", nothing to do.
[ gm] [ 16.314217] Load EXFAT filesystem driver.
[ gm] [ 16.314354] modprobe fuse.
[ gm] [ 16.325251] modprobe exfat.
[ KERNEL] [ 16.323530] fuse init (API version 7.26)
[ KERNEL] [ 16.330484] exFAT: Version 1.2.9
[ KERNEL] [ 16.334304] zram0: detected capacity change from 0 to 1073741824
[ KERNEL] [ 16.341201] Adding 1048572k swap on /dev/zram0. Priority:-2 extents:1 across:1048572k SS
[ gm] [ 17.705123] [FILE CACHE] Take 'packages/chprf' from cache.
[ gm] [ 17.724963] [FILE CACHE] Take 'packages/pi2-chrome' from cache.
[ gm] [ 17.729650] Run '/usr/lib/chromium-browser//chromium-browser --window-size=1920,1080 --window-position=0,0 --disable-ipv6 --disable-gpu --wm-window-animations-disabled --no-default-browser-check --password-store=basic --disable-infobars --show-component-extension-options --ignore-gpu-blacklist --disable-pings --media-router=0 --enable-remote-extensions --enable-tcp-fast-open --disable-gpu-compositing --ppapi-flash-path=/usr/lib/chromium-browser/libpepflashplayer.so --ppapi-flash-args=enable_stagevideo_auto=0 --ppapi-flash-version=99.99.999.999 https://www.yandex.ru/', log '/tmp/Xapp00.out', env 'DISPLAY=:0.0 LANG=ru_RU.utf8 LANGUAGE=ru_RU HOME=/home/chromium XDG_RUNTIME_DIR=/run/user/777 GOOGLE_API_KEY=AIzaSyCkfPOPZXDKNn8hhgu3JrA62wIgC93d44k GOOGLE_DEFAULT_CLIENT_ID=811574891467.apps.googleusercontent.com GOOGLE_DEFAULT_CLIENT_SECRET=kdloedMFGdGla2P1zacGjAQh CHROME_VERSION_EXTRA=WTware', pid '/tmp/Xapp00.pidpipe'.
[ pfac] [ 17.729833] Run /usr/lib/chromium-browser//chromium-browser --window-size=1920,1080 --window-position=0,0 --disable-ipv6 --disable-gpu --wm-window-animations-disabled --no-default-browser-check --password-store=basic --disable-infobars --show-component-extension-options --ignore-gpu-blacklist --disable-pings --media-router=0 --enable-remote-extensions --enable-tcp-fast-open --disable-gpu-compositing --ppapi-flash-path=/usr/lib/chromium-browser/libpepflashplayer.so --ppapi-flash-args=enable_stagevideo_auto=0 --ppapi-flash-version=99.99.999.999 https://www.yandex.ru/.
[ pfac] [ 17.730171] Ok, PID 791.
[ gm] [ 17.730415] Success, pid 791.
[ gm] [ 17.730524] Everyone can control terminal by VNC.
[ gm] [ 17.730671] [VNC] Listener at port 5900.
[ gm] [ 17.730805] Allocate 8294400 bytes of shared memory for X imgbuf.
[ gm] [ 17.766899] Run '/sbin/resolver 0x1bd48c8 dns [192.168.200.70]', log '', env '', pid ''.
[ pfac] [ 17.767105] Run /sbin/resolver 0x1bd48c8 dns [192.168.200.70].
[ pfac] [ 17.767351] Ok, PID 792.
[ gm] [ 17.767632] Allocate 8294400 bytes of shared memory for X imgbuf.
[ pfac] [ 17.770207] Process pid 792 terminated, status 00000000.
[ gm] [ 17.796339] graphdriver_x.cpp ( 941): -- ERROR -- Got XShmCompletionEvent. ShmPutImageEventCounter 1.
[ gm] [ 17.796567] 192.168.200.70 => 192.168.200.70.
[ gm] [ 17.803588] Free ram before fork terminal client /sbin/rdpclient (session 1): 812232 Kb.
[ gm] [ 17.803716] Run '/sbin/rdpclient 1', log '/tmp/rdpclient.out', env '', pid ''.
[ pfac] [ 17.803854] Run /sbin/rdpclient 1.
[ pfac] [ 17.804108] Ok, PID 793.
[ rdpclient 793] [ 17.830270] RDP Terminal Client, WTware 5.8.26/RPi, pipe 1, pid 793.
[ rdpclient 793] [ 17.830876] Use /lib/ui32.so.
[ rdpclient 793] [ 17.831592] Add smartcard redirection.
[ rdpdr-scard] [ 17.831768] New client connection, id 1.
[ rdpclient 793] [ 17.831823] Make RDP session with 192.168.200.70, port 3389.
[ rdpclient 793] [ 17.831933] Username: "Rogozina".
[ rdpclient 793] [ 17.832027] No password.
[ rdpclient 793] [ 17.832115] No PIN.
[ rdpclient 793] [ 17.832200] No domain.
[ rdpclient 793] [ 17.832280] No shell.
[ rdpclient 793] [ 17.832361] No directory.
[ rdpclient 793] [ 17.832443] Window: 1920x1080@24.
[ rdpclient 793] [ 17.832526] PFlags 0x000000AF.
[ rdpclient 793] [ 17.832611] Keyboard 00000419:00000000.
[ rdpclient 793] [ 17.832692] My hostname "Rogozina_Dnch".
[ rdpclient 793] [ 17.832776] TCP: connecting to 192.168.200.70:3389.
[ rdpclient 793] [ 17.900735] TCP: connection with 192.168.200.70:3389 established.
[ rdpclient 793] [ 17.900939] Turn keepalive on.
[ rdpclient 793] [ 17.901783] Free ram after buffers allocation: 810084 KB.
[ rdpclient 793] [ 17.976223] Reconnect with TLS/SSL enabled.
[ rdpclient 793] [ 17.976385] TCP: reconnecting to 192.168.200.70:3389.
[ rdpclient 793] [ 18.045006] TCP: connection with 192.168.200.70:3389 established.
[ rdpclient 793] [ 18.045169] Turn keepalive on.
[ rdpclient 793] [ 18.120251] Server supports GFX Pipeline.
[ rdpclient 793] [ 18.120366] TLS.
[ rdpclient 793] [ 18.120415] SSL/TLS.
[ rdpclient 793] [ 18.899387] Enable font smoothing and Desktop Composition.
[ rdpclient 793] [ 18.978971] RDP5 encryption (X.509).
[ rdpclient 793] [ 19.347409] GFX codec.
[ rdpclient 793] [ 19.805568] Run 4 tile threads.
[ rdpdr-scard] [ 19.826614] Reset client 1.
[ X00] [ 19.910565] getrandom indicates that the entropy pool has not been initialized. Rather than continue with poor entropy, this process will block until entropy is available.
[ KERNEL] [ 25.325970] random: crng init done
[ KERNEL] [ 25.325982] random: 2 urandom warning(s) missed due to ratelimiting
[ X00] [ 26.511421] Fontconfig warning: "/etc/fonts/fonts.conf", line 160: blank doesn't take any effect anymore. please remove it from your fonts.conf
[SYSLOG] <29>Sep 19 09:25:59 dbus[704]: [system] Activating service name='org.bluez' (using servicehelper)
[SYSLOG] <29>Sep 19 09:25:59 dbus[704]: [system] Activated service 'org.bluez' failed: Failed to execute program org.bluez: No such file or directory
[ X00] [ 28.013112] [791:791:0919/092559.890078:ERROR:gpu_process_transport_factory.cc(1029)] Lost UI shared context.
[ X00] [ 28.885341] [791:845:0919/092600.762419:ERROR:bus.cc(394)] Failed to connect to the bus: Could not parse server address: Unknown address type (examples of valid types are "tcp" and on UNIX "unix")
[ gm] [ 29.723441] Bind window 0x00400001 (pid 791, ppid 1) to the screen 1.
[ gm] [ 29.846575] Unknown event 9.
[ gm] [ 32.832325] [VNC] Connection from 192.168.2.7.
[ gm] [ 32.862186] [VNC] Client VNC version 8 (RFB 003.008).
[ gm] [ 32.862358] [VNC] Empty password. Unsecure!
[ gm] [ 32.954645] [VNC] 12 encodings: 16 1 22 21 15 6 5 2 0 -314 -239 -223.
[ gm] [ 32.954763] [VNC] bits-per-pixel 32, depth 24, big-endian false, true-colour true.
[ gm] [ 32.954808] [VNC] red-max 0x00ff, green-max 0x00ff, blue-max 0x00ff.
[ gm] [ 32.954850] [VNC] red-shift 16, green-shift 8, blue-shift 0.
[ gm] [ 32.954894] [VNC] 32-bit server, 32-bit client.
[ gm] [ 33.208995] [VNC] 12 encodings: 0 1 22 21 16 15 6 5 2 -314 -239 -223.
[ gm] [ 33.464269] [VNC] 12 encodings: 16 1 22 21 15 6 5 2 0 -314 -239 -223.
[ rdpclient 793] [ 50.960552] errorInfo 0x0000000c.
[ rdpclient 793] [ 50.960654] ERRINFO_LOGOFF_BY_USER: The disconnection was initiated by the user logging off his or her session on the server.
[ rdpclient 793] [ 51.049688] Receive Disconnect Provider Ultimatum.
[ gm] [ 51.049844] TSClient (sessionId 1, pid 793) gracefully end.
[ rdpdr-scard] [ 51.056153] Close client connection 0 (id 1).
[ pfac] [ 51.056673] Process pid 793 terminated, status 00000009.
[ X00] [ 51.336418] [791:1008:0919/092623.213446:ERROR:object_proxy.cc(626)] Failed to call method: org.freedesktop.DBus.Properties.Get: object_path= /org/freedesktop/UPower: org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.UPower was not provided by any .service files
[ X00] [ 51.337839] [791:1008:0919/092623.214876:ERROR:object_proxy.cc(626)] Failed to call method: org.freedesktop.UPower.GetDisplayDevice: object_path= /org/freedesktop/UPower: org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.UPower was not provided by any .service files
[ X00] [ 51.339208] [791:1008:0919/092623.216241:ERROR:object_proxy.cc(626)] Failed to call method: org.freedesktop.UPower.EnumerateDevices: object_path= /org/freedesktop/UPower: org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.UPower was not provided by any .service files
[ gm] [ 66.035668] Unknown event 9.
[ gm] [ 81.946080] Run '/sbin/resolver 0x1bd48c8 dns [192.168.200.70]', log '', env '', pid ''.
[ pfac] [ 81.946339] Run /sbin/resolver 0x1bd48c8 dns [192.168.200.70].
[ pfac] [ 81.946559] Ok, PID 1016.
[ pfac] [ 81.950569] Process pid 1016 terminated, status 00000000.
[ gm] [ 82.107214] 192.168.200.70 => 192.168.200.70.
[ gm] [ 82.113402] Free ram before fork terminal client /sbin/rdpclient (session 2): 326080 Kb.
[ pfac] [ 82.113545] Run /sbin/rdpclient 2.
[ gm] [ 82.113576] Run '/sbin/rdpclient 2', log '/tmp/rdpclient.out', env '', pid ''.
[ pfac] [ 82.113710] Ok, PID 1017.
[rdpclient 1017] [ 82.118194] RDP Terminal Client, WTware 5.8.26/RPi, pipe 2, pid 1017.
[rdpclient 1017] [ 82.118699] Use /lib/ui32.so.
[rdpclient 1017] [ 82.119120] Add smartcard redirection.
[ rdpdr-scard] [ 82.119217] New client connection, id 2.
[rdpclient 1017] [ 82.119245] Make RDP session with 192.168.200.70, port 3389.
[rdpclient 1017] [ 82.119295] Username: "Rogozina".
[rdpclient 1017] [ 82.119342] No password.
[rdpclient 1017] [ 82.119387] No PIN.
[rdpclient 1017] [ 82.119486] No domain.
[rdpclient 1017] [ 82.119527] No shell.
[rdpclient 1017] [ 82.119568] No directory.
[rdpclient 1017] [ 82.119608] Window: 1920x1080@24.
[rdpclient 1017] [ 82.119647] PFlags 0x000000AF.
[rdpclient 1017] [ 82.119689] Keyboard 00000419:00000000.
[rdpclient 1017] [ 82.119728] My hostname "Rogozina_Dnch".
[rdpclient 1017] [ 82.119771] TCP: connecting to 192.168.200.70:3389.
[rdpclient 1017] [ 82.188104] TCP: connection with 192.168.200.70:3389 established.
[rdpclient 1017] [ 82.188301] Turn keepalive on.
[rdpclient 1017] [ 82.188710] Free ram after buffers allocation: 325776 KB.
[rdpclient 1017] [ 82.264911] Reconnect with TLS/SSL enabled.
[rdpclient 1017] [ 82.265059] TCP: reconnecting to 192.168.200.70:3389.
[rdpclient 1017] [ 82.333984] TCP: connection with 192.168.200.70:3389 established.
[rdpclient 1017] [ 82.334179] Turn keepalive on.
[rdpclient 1017] [ 82.408764] Server supports GFX Pipeline.
[rdpclient 1017] [ 82.408997] TLS.
[rdpclient 1017] [ 82.409106] SSL/TLS.
[rdpclient 1017] [ 83.193111] Enable font smoothing and Desktop Composition.
[rdpclient 1017] [ 83.273272] RDP5 encryption (X.509).
[rdpclient 1017] [ 83.657452] GFX codec.
[ rdpdr-scard] [ 84.184829] Reset client 2.
[rdpclient 1017] [ 84.245628] Run 4 tile threads.
[rdpclient 1017] [ 94.139193] LOGON_EX_LOGONERRORS: ErrorNotificationType 0xfffffffe, ErrorNotificationData 0x00000009.
[rdpclient 1017] [ 94.409287] SessionId 0x00000009: ALLIANCE\Unanova.
[ gm] [ 158.852668] [VNC] 12 encodings: 15 1 5 22 21 16 6 2 0 -314 -239 -223.
[ gm] [ 173.078245] [VNC] 12 encodings: 16 1 22 21 15 6 5 2 0 -314 -239 -223.
[ gm] [ 174.115635] [VNC] 12 encodings: 15 1 5 22 21 16 6 2 0 -314 -239 -223.
[ gm] [ 194.870679] [VNC] 12 encodings: 16 1 22 21 15 6 5 2 0 -314 -239 -223.
[ gm] [ 209.106417] [VNC] Close connection.
[ gm] [ 251.849570] [VNC] Connection from 192.168.2.7.
[ gm] [ 251.879224] [VNC] Client VNC version 8 (RFB 003.008).
[ gm] [ 251.879450] [VNC] Empty password. Unsecure!
[ gm] [ 251.971407] [VNC] 12 encodings: 16 1 22 21 15 6 5 2 0 -314 -239 -223.
[ gm] [ 251.971617] [VNC] bits-per-pixel 32, depth 24, big-endian false, true-colour true.
[ gm] [ 251.971718] [VNC] red-max 0x00ff, green-max 0x00ff, blue-max 0x00ff.
[ gm] [ 251.971798] [VNC] red-shift 16, green-shift 8, blue-shift 0.
[ gm] [ 251.971878] [VNC] 32-bit server, 32-bit client.
[ rdpdr-scard] [ 293.075446] rdpdr[scard]-worker.cpp ( 1101): -- ERROR -- Unknown reader attribute 00010101.
[ rdpdr-scard] [ 293.075723] rdpdr[scard]-worker.cpp ( 1102): -- ERROR -- SCARD_E_INVALID_VALUE, invalid parameter.
Home
WTware diskless client.