1. Отключил питание
2. Включил питание
3. Зашел в меню настройки на малине
4. Поменял пароль на "test123"
5. Вышел из меню, подождал когда малина загрузится.
6. С соседнего компа зашел на малину через браузер
7. Ввел пароль для редактирования конфига "test123"
8. Получил отлуп Incorrect password
9. Перегрузил малину
10. Зашел в меню настройки на малине с паролем "test123"
11. Поменял пароль на "12345"
12. Вышел из меню, подождал когда малина загрузится.
13. С соседнего компа зашел на малину через браузер
14. Ввел пароль для редактирования конфига "12345"
15. Получил доступ
16. Снял лог через браузер
лог ниже
WTware 5.4.86/RPi supervisor.
[ KERNEL] [ 0.000000] Booting Linux on physical CPU 0x0
[ KERNEL] [ 0.000000] Linux version 4.9.20 (aka@c12) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.4) ) #3 SMP Tue Apr 4 15:19:18 +04 2017
[ KERNEL] [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[ KERNEL] [ 0.000000] CPU: div instructions available: patching division code
[ KERNEL] [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ KERNEL] [ 0.000000] OF: fdt:Machine model: Raspberry Pi 3 Model B Rev 1.2
[ KERNEL] [ 0.000000] cma: Reserved 8 MiB at 0x3a800000
[ KERNEL] [ 0.000000] Memory policy: Data cache writealloc
[ KERNEL] [ 0.000000] On node 0 totalpages: 241664
[ KERNEL] [ 0.000000] free_area_init_node: node 0, pgdat 80b21d40, node_mem_map b9faa000
[ KERNEL] [ 0.000000] Normal zone: 2124 pages used for memmap
[ KERNEL] [ 0.000000] Normal zone: 0 pages reserved
[ KERNEL] [ 0.000000] Normal zone: 241664 pages, LIFO batch:31
[ KERNEL] [ 0.000000] percpu: Embedded 11 pages/cpu @b9f70000 s16012 r8192 d20852 u45056
[ KERNEL] [ 0.000000] pcpu-alloc: s16012 r8192 d20852 u45056 alloc=11*4096
[ KERNEL] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ KERNEL] [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 239540
[ KERNEL] [ 0.000000] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=1280 bcm2708_fb.fbheight=1024 bcm2708_fb.fbdepth=32 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 quiet wtboot=mmc
[ KERNEL] [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ KERNEL] [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ KERNEL] [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ KERNEL] [ 0.000000] Memory: 938124K/966656K available (5120K kernel code, 139K rwdata, 900K rodata, 4096K init, 373K bss, 20340K reserved, 8192K cma-reserved)
[ KERNEL] [ 0.000000] Virtual kernel memory layout:
[ KERNEL] [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ KERNEL] [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ KERNEL] [ 0.000000] vmalloc : 0xbb800000 - 0xff800000 (1088 MB)
[ KERNEL] [ 0.000000] lowmem : 0x80000000 - 0xbb000000 ( 944 MB)
[ KERNEL] [ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
[ KERNEL] [ 0.000000] .text : 0x80008000 - 0x80600000 (6112 kB)
[ KERNEL] [ 0.000000] .init : 0x80700000 - 0x80b00000 (4096 kB)
[ KERNEL] [ 0.000000] .data : 0x80b00000 - 0x80b22dd8 ( 140 kB)
[ KERNEL] [ 0.000000] .bss : 0x80b24000 - 0x80b815e0 ( 374 kB)
[ KERNEL] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ KERNEL] [ 0.000000] Hierarchical RCU implementation.
[ KERNEL] [ 0.000000] Build-time adjustment of leaf fanout to 32.
[ KERNEL] [ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ KERNEL] [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys).
[ KERNEL] [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ KERNEL] [ 0.000008] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ KERNEL] [ 0.000019] Switching to timer-based delay loop, resolution 52ns
[ KERNEL] [ 0.000236] Console: colour dummy device 80x30
[ KERNEL] [ 0.000253] console [tty0] enabled
[ KERNEL] [ 0.000273] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ KERNEL] [ 0.000289] pid_max: default: 32768 minimum: 301
[ KERNEL] [ 0.000432] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ KERNEL] [ 0.000439] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ KERNEL] [ 0.001288] Disabling cpuset control group subsystem
[ KERNEL] [ 0.001422] CPU: Testing write buffer coherency: ok
[ KERNEL] [ 0.001865] CPU0: update cpu_capacity 1024
[ KERNEL] [ 0.001873] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ KERNEL] [ 0.001918] Setting up static identity map for 0x100000 - 0x100034
[ KERNEL] [ 0.003604] CPU1: update cpu_capacity 1024
[ KERNEL] [ 0.003611] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ KERNEL] [ 0.004170] CPU2: update cpu_capacity 1024
[ KERNEL] [ 0.004177] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ KERNEL] [ 0.004718] CPU3: update cpu_capacity 1024
[ KERNEL] [ 0.004724] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ KERNEL] [ 0.004796] Brought up 4 CPUs
[ KERNEL] [ 0.004805] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[ KERNEL] [ 0.004809] CPU: All CPU(s) started in HYP mode.
[ KERNEL] [ 0.004812] CPU: Virtualization extensions available.
[ KERNEL] [ 0.005347] devtmpfs: initialized
[ KERNEL] [ 0.014730] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[ KERNEL] [ 0.015117] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ KERNEL] [ 0.015132] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ KERNEL] [ 0.015615] pinctrl core: initialized pinctrl subsystem
[ KERNEL] [ 0.016151] NET: Registered protocol family 16
[ KERNEL] [ 0.017984] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ KERNEL] [ 0.028067] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ KERNEL] [ 0.111110] bcm2835-dma 3f007000.dma: DMA legacy API manager at bb80f000, dmachans=0x1
[ KERNEL] [ 0.113459] usbcore: registered new interface driver usbfs
[ KERNEL] [ 0.113585] usbcore: registered new interface driver hub
[ KERNEL] [ 0.113674] usbcore: registered new device driver usb
[ KERNEL] [ 0.120109] raspberrypi-firmware soc:firmware: Attached to firmware from 2017-03-30 14:48
[ KERNEL] [ 0.122356] clocksource: Switched to clocksource arch_sys_counter
[ KERNEL] [ 0.137397] NET: Registered protocol family 2
[ KERNEL] [ 0.137978] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ KERNEL] [ 0.138086] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ KERNEL] [ 0.138270] TCP: Hash tables configured (established 8192 bind 8192)
[ KERNEL] [ 0.138355] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ KERNEL] [ 0.138396] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ KERNEL] [ 0.138573] NET: Registered protocol family 1
[ KERNEL] [ 2.176195] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ KERNEL] [ 2.211838] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ KERNEL] [ 2.211849] io scheduler noop registered
[ KERNEL] [ 2.211854] io scheduler deadline registered (default)
[ KERNEL] [ 2.221294] BCM2708FB: allocated DMA memory fa910000
[ KERNEL] [ 2.221356] BCM2708FB: allocated DMA channel 0 @ bb80f000
[ KERNEL] [ 2.258892] Console: switching to colour frame buffer device 160x64
[ KERNEL] [ 2.283380] bcm2835-rng 3f104000.rng: hwrng registered
[ KERNEL] [ 2.283537] vc-cma: Videocore CMA driver
[ KERNEL] [ 2.283543] vc-cma: vc_cma_base = 0x00000000
[ KERNEL] [ 2.283550] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
[ KERNEL] [ 2.283555] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
[ KERNEL] [ 2.283878] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
[ KERNEL] [ 2.288117] zram: Added device: zram0
[ KERNEL] [ 2.288186] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ KERNEL] [ 2.514361] Core Release: 2.80a
[ KERNEL] [ 2.514369] Setting default values for core params
[ KERNEL] [ 2.514394] Finished setting default values for core params
[ KERNEL] [ 2.714807] Using Buffer DMA mode
[ KERNEL] [ 2.714812] Periodic Transfer Interrupt Enhancement - disabled
[ KERNEL] [ 2.714816] Multiprocessor Interrupt Enhancement - disabled
[ KERNEL] [ 2.714822] OTG VER PARAM: 0, OTG VER FLAG: 0
[ KERNEL] [ 2.714850] Dedicated Tx FIFOs mode
[ KERNEL] [ 2.715331] WARN::dwc_otg_hcd_init:1053: FIQ DMA bounce buffers: virt = 0xba904000 dma = 0xfa904000 len=9024
[ KERNEL] [ 2.715356] FIQ FSM acceleration enabled for :
[ KERNEL] [ 2.715356] Non-periodic Split Transactions
[ KERNEL] [ 2.715356] Periodic Split Transactions
[ KERNEL] [ 2.715356] High-Speed Isochronous Endpoints
[ KERNEL] [ 2.715356] Interrupt/Control Split Transaction hack enabled
[ KERNEL] [ 2.715362] dwc_otg: Microframe scheduler enabled
[ KERNEL] [ 2.715403] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x80392ef0
[ KERNEL] [ 2.715411] WARN::hcd_init_fiq:460: FIQ ASM at 0x80393254 length 36
[ KERNEL] [ 2.715421] WARN::hcd_init_fiq:486: MPHI regs_base at 0xbb925000
[ KERNEL] [ 2.715475] dwc_otg 3f980000.usb: DWC OTG Controller
[ KERNEL] [ 2.715508] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[ KERNEL] [ 2.715538] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[ KERNEL] [ 2.715583] Init: Port Power? op_state=1
[ KERNEL] [ 2.715587] Init: Power Port (0)
[ KERNEL] [ 2.715765] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ KERNEL] [ 2.715775] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ KERNEL] [ 2.715782] usb usb1: Product: DWC OTG Controller
[ KERNEL] [ 2.715789] usb usb1: Manufacturer: Linux 4.9.20 dwc_otg_hcd
[ KERNEL] [ 2.715796] usb usb1: SerialNumber: 3f980000.usb
[ KERNEL] [ 2.716645] hub 1-0:1.0: USB hub found
[ KERNEL] [ 2.716684] hub 1-0:1.0: 1 port detected
[ KERNEL] [ 2.717350] dwc_otg: FIQ enabled
[ KERNEL] [ 2.717354] dwc_otg: NAK holdoff enabled
[ KERNEL] [ 2.717357] dwc_otg: FIQ split-transaction FSM enabled
[ KERNEL] [ 2.717438] Module dwc_common_port init
[ KERNEL] [ 2.718064] usbcore: registered new interface driver usbtouchscreen
[ KERNEL] [ 2.719601] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[ KERNEL] [ 2.720119] bcm2835-cpufreq: min=600000 max=1200000
[ KERNEL] [ 2.721291] sdhost-bcm2835 3f202000.sdhost: could not get clk, deferring probe
[ KERNEL] [ 2.723858] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[ KERNEL] [ 2.732276] ledtrig-cpu: registered to indicate activity on CPUs
[ KERNEL] [ 2.732435] hidraw: raw HID events driver (C) Jiri Kosina
[ KERNEL] [ 2.732763] usbcore: registered new interface driver usbhid
[ KERNEL] [ 2.732765] usbhid: USB HID core driver
[ KERNEL] [ 2.737365] vchiq: vchiq_init_state: slot_zero = 0xba980000, is_master = 0
[ KERNEL] [ 2.740548] NET: Registered protocol family 17
[ KERNEL] [ 2.740654] Registering SWP/SWPB emulation handler
[ KERNEL] [ 2.741143] registered taskstats version 1
[ KERNEL] [ 2.741360] vc-sm: Videocore shared memory driver
[ KERNEL] [ 2.741366] [vc_sm_connected_init]: start
[ KERNEL] [ 2.749940] [vc_sm_connected_init]: end - returning 0
[ KERNEL] [ 2.753500] sdhost: log_buf @ ba907000 (fa907000)
[ KERNEL] [ 2.832368] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ KERNEL] [ 2.834477] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[ KERNEL] [ 2.834481] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[ KERNEL] [ 2.899519] mmc0: host does not support reading read-only switch, assuming write-enable
[ KERNEL] [ 2.901500] mmc0: new high speed SDHC card at address 59b4
[ KERNEL] [ 2.901957] mmcblk0: mmc0:59b4 USD 3.75 GiB
[ KERNEL] [ 2.903150] mmcblk0: p1
[ KERNEL] [ 2.912494] of_cfs_init
[ KERNEL] [ 2.912549] of_cfs_init: OK
[ KERNEL] [ 2.923070] Freeing unused kernel memory: 4096K (80700000 - 80b00000)
[ KERNEL] [ 2.942471] Indeed it is in host mode hprt0 = 00021501
[ KERNEL] [ 2.944297] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ KERNEL] [ 2.945811] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ KERNEL] [ 2.947344] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ KERNEL] [ 2.950053] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ KERNEL] [ 2.996799] random: fast init done
[ KERNEL] [ 3.036253] mmc1: new high speed SDIO card at address 0001
[ KERNEL] [ 3.142403] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ KERNEL] [ 3.142539] Indeed it is in host mode hprt0 = 00001101
[ hotplug] [ 3.190914] Block device 254:0. No action.
[ hotplug] [ 3.202547] Block device 179:0. No action.
[ hotplug] [ 3.202643] Block device 179:1. No action.
[ pfac] [ 3.246026] Run /sbin/initrd.
[ pfac] [ 3.246303] Ok, PID 590.
[ initrd] [ 3.249849] WTware shell 5.4.86/RPi
[ initrd] [ 3.296694] Local media boot.
[ KERNEL] [ 3.382623] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[ KERNEL] [ 3.382636] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ KERNEL] [ 3.383443] hub 1-1:1.0: USB hub found
[ KERNEL] [ 3.383538] hub 1-1:1.0: 5 ports detected
[ KERNEL] [ 3.702392] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ KERNEL] [ 3.832617] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ KERNEL] [ 3.832628] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ KERNEL] [ 3.932396] usb 1-1.3: new low-speed USB device number 4 using dwc_otg
[ KERNEL] [ 4.076658] usb 1-1.3: New USB device found, idVendor=1bcf, idProduct=0007
[ KERNEL] [ 4.076668] usb 1-1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ KERNEL] [ 4.076676] usb 1-1.3: Product: USB Optical Mouse
[ KERNEL] [ 4.096337] input: USB Optical Mouse as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.0/0003:1BCF:0007.0001/input/input0
[ KERNEL] [ 4.097216] hid-generic 0003:1BCF:0007.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-3f980000.usb-1.3/input0
[ KERNEL] [ 4.412383] usb 1-1.2: new low-speed USB device number 5 using dwc_otg
[ KERNEL] [ 4.562126] dwc_otg: DEVICE:005 : update_urb_state_xfer_comp:743:trimming xfer length
[ KERNEL] [ 4.562280] usb 1-1.2: New USB device found, idVendor=1c4f, idProduct=0002
[ KERNEL] [ 4.562290] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ KERNEL] [ 4.562298] usb 1-1.2: Product: USB Keykoard
[ KERNEL] [ 4.562305] usb 1-1.2: Manufacturer: USB
[ KERNEL] [ 4.573401] input: USB USB Keykoard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:1C4F:0002.0002/input/input1
[ KERNEL] [ 4.643455] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-3f980000.usb-1.2/input0
[ KERNEL] [ 4.652793] input: USB USB Keykoard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.1/0003:1C4F:0002.0003/input/input2
[ KERNEL] [ 4.732840] hid-generic 0003:1C4F:0002.0003: input,hidraw2: USB HID v1.10 Device [USB USB Keykoard] on usb-3f980000.usb-1.2/input1
/--- FILE "/bootmedia/config.txt" -----------------------
| # For more options and information see
| #
http://www.raspberrypi.org/documentatio ... fig-txt.md
| # Some settings may impact device functionality. See link above for details
| # Uncomment if you get no picture on HDMI for a default "safe" mode.
| #hdmi_safe=1
| # Uncomment this if your display has a black border of unused pixels visible
| # and your display can output without overscan.
| disable_overscan=1
| # Uncomment if hdmi display is not detected and composite is being output.
| #hdmi_force_hotplug=1
| # Uncomment to force a specific HDMI mode (this will force VGA).
| #hdmi_group=1
| #hdmi_mode=1
| # Force the monitor to HDMI mode so that sound will be sent over HDMI cable.
| #hdmi_drive=2
| # Uncomment to increase signal to HDMI, if you have interference, blanking, or
| # no display.
| #config_hdmi_boost=4
| # Uncomment to overclock the arm. 700 MHz is the default.
| #arm_freq=800
| disable_splash=1
| #hdmi_group=2
| # 800x600: hdmi_mode=9
| # 1024x768: hdmi_mode=16
| # 1280x1024: hdmi_mode=35
| # 1360x768: hdmi_mode=39
| # 1400x1050: hdmi_mode=42
| # 1440x900: hdmi_mode=47
| # 1600x1200: hdmi_mode=51
| # 1680x1050: hdmi_mode=58
| # 1366x768: hdmi_mode=81
| # 1920x1080: hdmi_mode=82
| # 1920x1200: hdmi_mode=69
| framebuffer_depth=32
| # Uncomment for 16-bit color. It is up to two
| # times faster than default 32-bit.
| #framebuffer_depth=16
| # Enable onboard audio (HDMI or jack).
| dtparam=audio=on
| # Removes the warning overlay.
| #avoid_warnings=1
| # Additionally allows turbo when low-voltage is present.
| #avoid_warnings=2
| hdmi_group=2
| hdmi_mode=35
\----------------------------------------------------
[ initrd] [ 4.791633] WTpassword present: ce24495ceaf77323f10b9d284d84af31.
[ KERNEL] [ 10.583185] random: crng init done
[ initrd] [ 10.581152] Start Setup.
[ initrd] [ 21.109323] Remount /bootmedia for writing.
[ KERNEL] [ 21.111858] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ initrd] [ 21.110880] Remount /bootmedia as read-only.
/--- FILE "/bootmedia/configs/initrd.wtc" -----------------------
| [BOM]
| clientIP=*
| config=local
| setupPassword=cc72aad3323582f495f9cce9c18dded0
\----------------------------------------------------
[ initrd] [ 29.717671] Load ethernet drivers.
[ initrd] [ 29.717796] modprobe smsc95xx.
[ KERNEL] [ 29.727716] smsc95xx v1.0.5
[ KERNEL] [ 29.816232] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:f3:f6:0d
[ KERNEL] [ 29.816431] usbcore: registered new interface driver smsc95xx
[ KERNEL] [ 29.904320] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ KERNEL] [ 31.379620] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
[ initrd] [ 31.405077] WTpassword present: cc72aad3323582f495f9cce9c18dded0.
[ initrd] [ 31.950158] dhcp: 576 bytes from 192.168.1.1.
[ initrd] [ 31.950336] 00000000:0000022C0000000000110000C0A80101FFFFFFFF00430044022C000002010600 ...,................C.D.,......
[ initrd] [ 31.950468] 00000020:67458B6B0000000000000000C0A801220000000000000000B827EBF3F60D0000 gE.k...........".........'......
[ initrd] [ 31.950597] 00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 31.950722] 00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 31.950846] 00000080:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 31.950970] 000000a0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 31.951093] 000000c0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 31.951215] 000000e0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 33.550893] dhcp: 576 bytes from 192.168.1.1.
[ initrd] [ 33.551081] 00000000:0000022C0000000000110000C0A80101FFFFFFFF00430044022C000002010600 ...,................C.D.,......
[ initrd] [ 33.551212] 00000020:67458B6B0000000000000000C0A801220000000000000000B827EBF3F60D0000 gE.k...........".........'......
[ initrd] [ 33.551337] 00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 33.551463] 00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 33.551586] 00000080:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 33.551713] 000000a0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 33.551838] 000000c0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 33.551962] 000000e0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 33.590087] dhcp: server address 192.168.1.1.
[ initrd] [ 33.590198] dhcp: 192.168.1.34/255.255.255.0.
[ initrd] [ 33.590303] dhcp: default gateway 192.168.1.1.
[ initrd] [ 33.590407] dhcp: DNS 192.168.1.1.
[ initrd] [ 33.590513] dhcp: TFTP = DHCP 192.168.1.1.
[ initrd] [ 33.590617] dhcp: TFTP 192.168.1.1.
[ initrd] [ 33.590719] No boot file from DHCP.
[ initrd] [ 33.590821] TFTP binary "", configs prefix "", using "/" slash.
WTC listener is active.
WTC broadcast listener is active.
Send broadcast WTCU discover.
[ initrd] [ 33.593140] Run '/sbin/httpd', log '/tmp/httpd.out', env '', pid ''.
[ pfac] [ 33.593374] Run /sbin/httpd.
[ pfac] [ 33.593626] Ok, PID 640.
[ httpd] [ 33.598472] HTTP Server, WTware 5.4.86/RPi
[ initrd] [ 33.720317] USB: 1bcf:0007 Sunplus Innovation Technology Inc. Optical Mouse.
[ initrd] [ 33.720526] USB: 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter.
[ initrd] [ 33.720658] USB: 0424:9514 Standard Microsystems Corp. SMC9514 Hub.
[ initrd] [ 33.720782] USB: 1c4f:0002 SiGma Micro Keyboard TRACER Gamma Ivory.
[ initrd] [ 33.721222] Copy /bootmedia/configs/config.wtc to /tmp/config.wtc.
[ initrd] [ 33.722458] Common local disk config:
/--- FILE "/tmp/config.wtc" -----------------------
| [BOM]
| server=195.9.61.70:3394
| connection
\----------------------------------------------------
[ initrd] [ 33.723300] Remount /bootmedia for writing.
[ initrd] [ 33.724501] Remount /bootmedia as read-only.
[ KERNEL] [ 33.725800] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
/--- FILE "/etc/config.compiled" -----------------------
| [BOM]
| server=195.9.61.70:3394
| connection
\----------------------------------------------------
[ initrd] [ 33.753392] Hostname: "wtwB827EBF3F60D".
Everyone can control terminal by RSH.
RSH: listener is active.
Send broadcast WTCU discover.
[ httpd] [ 34.106698] Reread settings.
[ httpd] [ 34.106818] Everyone can control terminal by HTTP.
[ gm] [ 34.110767] WTware session manager 5.4.86/RPi.
[ gm] [ 34.111653] Add keyboard event2: USB USB Keykoard.
[ gm] [ 34.111734] Add keyboard event1: USB USB Keykoard.
[ gm] [ 34.180106] EV_REL flag found. Add mouse event0: USB Optical Mouse.
[ gm] [ 34.180321] Display mode: 1280x1024, 32 bit, 0 Hz, modeline "", DDC enabled, connector 0.
[ gm] [ 34.202691] Framebuffer device found.
[ gm] [ 34.202770] LINELENBYTES 5120
[ gm] [ 34.202842] VLEN 5242880
[ gm] [ 34.226021] Use /lib/ui32.so.
[ gm] [ 34.308565] Run '/sbin/resolver 0x161930 dns [195.9.61.70]', log '', env '', pid ''.
[ pfac] [ 34.308717] Run /sbin/resolver 0x161930 dns [195.9.61.70].
[ pfac] [ 34.308960] Ok, PID 642.
[ gm] [ 34.309068] Nobody can control terminal by VNC.
[ pfac] [ 34.313245] Process pid 642 terminated, status 00000000.
[ gm] [ 34.316386] 195.9.61.70 => 195.9.61.70.
[ gm] [ 34.316556] Free ram before fork terminal client /sbin/rdpclient (session 1): 926060 Kb.
[ gm] [ 34.316635] Run '/sbin/rdpclient 1', log '/tmp/rdpclient.out', env '', pid ''.
[ pfac] [ 34.316709] Run /sbin/rdpclient 1.
[ pfac] [ 34.316994] Ok, PID 643.
[ rdpclient 643] [ 34.324495] RDP Terminal Client, WTware 5.4.86/RPi, pipe 1, pid 643.
[ rdpclient 643] [ 34.326693] Use /lib/ui32.so.
[ rdpclient 643] [ 34.326817] Make RDP session with 195.9.61.70, port 3394.
[ rdpclient 643] [ 34.326899] No username.
[ rdpclient 643] [ 34.326976] No password.
[ rdpclient 643] [ 34.327052] No PIN.
[ rdpclient 643] [ 34.327128] No domain.
[ rdpclient 643] [ 34.327203] No shell.
[ rdpclient 643] [ 34.327278] No directory.
[ rdpclient 643] [ 34.327352] Window: 1280x1024@24.
[ rdpclient 643] [ 34.327427] PFlags 0x0000002F.
[ rdpclient 643] [ 34.327503] Keyboard 00000409:00000000.
[ rdpclient 643] [ 34.327578] My hostname "wtwB827EBF3F60D".
[ rdpclient 643] [ 34.327652] TCP: connecting to 195.9.61.70:3394.
[ rdpclient 643] [ 34.335474] TCP: connection with 195.9.61.70:3394 established.
[ rdpclient 643] [ 34.335565] Turn keepalive on.
[ rdpclient 643] [ 34.336446] Free ram after buffers allocation: 925284 KB.
[ rdpclient 643] [ 34.347385] Server supports GFX Pipeline.
[ rdpclient 643] [ 34.371612] Process RDP server certificate.
[ rdpclient 643] [ 34.371701] RDP5 encryption (X.509).
[ rdpclient 643] [ 34.433727] Enable font smoothing and Desktop Composition.
[ rdpclient 643] [ 34.625171] GFX codec.
[ rdpclient 643] [ 35.068062] Run 4 tile threads.
[ httpd] [ 99.345953] Mount /bootmedia as read-only.
[ httpd] [ 99.356901] Umount /bootmedia.
1. Отключил питание
2. Включил питание
3. Зашел в меню настройки на малине
4. Поменял пароль на "test123"
5. Вышел из меню, подождал когда малина загрузится.
6. С соседнего компа зашел на малину через браузер
7. Ввел пароль для редактирования конфига "test123"
8. Получил отлуп Incorrect password
9. Перегрузил малину
10. Зашел в меню настройки на малине с паролем "test123"
11. Поменял пароль на "12345"
12. Вышел из меню, подождал когда малина загрузится.
13. С соседнего компа зашел на малину через браузер
14. Ввел пароль для редактирования конфига "12345"
15. Получил доступ
16. Снял лог через браузер
лог ниже
WTware 5.4.86/RPi supervisor.
[ KERNEL] [ 0.000000] Booting Linux on physical CPU 0x0
[ KERNEL] [ 0.000000] Linux version 4.9.20 (aka@c12) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.4) ) #3 SMP Tue Apr 4 15:19:18 +04 2017
[ KERNEL] [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[ KERNEL] [ 0.000000] CPU: div instructions available: patching division code
[ KERNEL] [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ KERNEL] [ 0.000000] OF: fdt:Machine model: Raspberry Pi 3 Model B Rev 1.2
[ KERNEL] [ 0.000000] cma: Reserved 8 MiB at 0x3a800000
[ KERNEL] [ 0.000000] Memory policy: Data cache writealloc
[ KERNEL] [ 0.000000] On node 0 totalpages: 241664
[ KERNEL] [ 0.000000] free_area_init_node: node 0, pgdat 80b21d40, node_mem_map b9faa000
[ KERNEL] [ 0.000000] Normal zone: 2124 pages used for memmap
[ KERNEL] [ 0.000000] Normal zone: 0 pages reserved
[ KERNEL] [ 0.000000] Normal zone: 241664 pages, LIFO batch:31
[ KERNEL] [ 0.000000] percpu: Embedded 11 pages/cpu @b9f70000 s16012 r8192 d20852 u45056
[ KERNEL] [ 0.000000] pcpu-alloc: s16012 r8192 d20852 u45056 alloc=11*4096
[ KERNEL] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ KERNEL] [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 239540
[ KERNEL] [ 0.000000] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=1280 bcm2708_fb.fbheight=1024 bcm2708_fb.fbdepth=32 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 quiet wtboot=mmc
[ KERNEL] [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ KERNEL] [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ KERNEL] [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ KERNEL] [ 0.000000] Memory: 938124K/966656K available (5120K kernel code, 139K rwdata, 900K rodata, 4096K init, 373K bss, 20340K reserved, 8192K cma-reserved)
[ KERNEL] [ 0.000000] Virtual kernel memory layout:
[ KERNEL] [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ KERNEL] [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ KERNEL] [ 0.000000] vmalloc : 0xbb800000 - 0xff800000 (1088 MB)
[ KERNEL] [ 0.000000] lowmem : 0x80000000 - 0xbb000000 ( 944 MB)
[ KERNEL] [ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
[ KERNEL] [ 0.000000] .text : 0x80008000 - 0x80600000 (6112 kB)
[ KERNEL] [ 0.000000] .init : 0x80700000 - 0x80b00000 (4096 kB)
[ KERNEL] [ 0.000000] .data : 0x80b00000 - 0x80b22dd8 ( 140 kB)
[ KERNEL] [ 0.000000] .bss : 0x80b24000 - 0x80b815e0 ( 374 kB)
[ KERNEL] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ KERNEL] [ 0.000000] Hierarchical RCU implementation.
[ KERNEL] [ 0.000000] Build-time adjustment of leaf fanout to 32.
[ KERNEL] [ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ KERNEL] [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys).
[ KERNEL] [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ KERNEL] [ 0.000008] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ KERNEL] [ 0.000019] Switching to timer-based delay loop, resolution 52ns
[ KERNEL] [ 0.000236] Console: colour dummy device 80x30
[ KERNEL] [ 0.000253] console [tty0] enabled
[ KERNEL] [ 0.000273] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ KERNEL] [ 0.000289] pid_max: default: 32768 minimum: 301
[ KERNEL] [ 0.000432] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ KERNEL] [ 0.000439] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ KERNEL] [ 0.001288] Disabling cpuset control group subsystem
[ KERNEL] [ 0.001422] CPU: Testing write buffer coherency: ok
[ KERNEL] [ 0.001865] CPU0: update cpu_capacity 1024
[ KERNEL] [ 0.001873] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ KERNEL] [ 0.001918] Setting up static identity map for 0x100000 - 0x100034
[ KERNEL] [ 0.003604] CPU1: update cpu_capacity 1024
[ KERNEL] [ 0.003611] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ KERNEL] [ 0.004170] CPU2: update cpu_capacity 1024
[ KERNEL] [ 0.004177] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ KERNEL] [ 0.004718] CPU3: update cpu_capacity 1024
[ KERNEL] [ 0.004724] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ KERNEL] [ 0.004796] Brought up 4 CPUs
[ KERNEL] [ 0.004805] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[ KERNEL] [ 0.004809] CPU: All CPU(s) started in HYP mode.
[ KERNEL] [ 0.004812] CPU: Virtualization extensions available.
[ KERNEL] [ 0.005347] devtmpfs: initialized
[ KERNEL] [ 0.014730] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[ KERNEL] [ 0.015117] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ KERNEL] [ 0.015132] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ KERNEL] [ 0.015615] pinctrl core: initialized pinctrl subsystem
[ KERNEL] [ 0.016151] NET: Registered protocol family 16
[ KERNEL] [ 0.017984] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ KERNEL] [ 0.028067] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ KERNEL] [ 0.111110] bcm2835-dma 3f007000.dma: DMA legacy API manager at bb80f000, dmachans=0x1
[ KERNEL] [ 0.113459] usbcore: registered new interface driver usbfs
[ KERNEL] [ 0.113585] usbcore: registered new interface driver hub
[ KERNEL] [ 0.113674] usbcore: registered new device driver usb
[ KERNEL] [ 0.120109] raspberrypi-firmware soc:firmware: Attached to firmware from 2017-03-30 14:48
[ KERNEL] [ 0.122356] clocksource: Switched to clocksource arch_sys_counter
[ KERNEL] [ 0.137397] NET: Registered protocol family 2
[ KERNEL] [ 0.137978] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ KERNEL] [ 0.138086] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ KERNEL] [ 0.138270] TCP: Hash tables configured (established 8192 bind 8192)
[ KERNEL] [ 0.138355] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ KERNEL] [ 0.138396] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ KERNEL] [ 0.138573] NET: Registered protocol family 1
[ KERNEL] [ 2.176195] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ KERNEL] [ 2.211838] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ KERNEL] [ 2.211849] io scheduler noop registered
[ KERNEL] [ 2.211854] io scheduler deadline registered (default)
[ KERNEL] [ 2.221294] BCM2708FB: allocated DMA memory fa910000
[ KERNEL] [ 2.221356] BCM2708FB: allocated DMA channel 0 @ bb80f000
[ KERNEL] [ 2.258892] Console: switching to colour frame buffer device 160x64
[ KERNEL] [ 2.283380] bcm2835-rng 3f104000.rng: hwrng registered
[ KERNEL] [ 2.283537] vc-cma: Videocore CMA driver
[ KERNEL] [ 2.283543] vc-cma: vc_cma_base = 0x00000000
[ KERNEL] [ 2.283550] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
[ KERNEL] [ 2.283555] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
[ KERNEL] [ 2.283878] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
[ KERNEL] [ 2.288117] zram: Added device: zram0
[ KERNEL] [ 2.288186] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ KERNEL] [ 2.514361] Core Release: 2.80a
[ KERNEL] [ 2.514369] Setting default values for core params
[ KERNEL] [ 2.514394] Finished setting default values for core params
[ KERNEL] [ 2.714807] Using Buffer DMA mode
[ KERNEL] [ 2.714812] Periodic Transfer Interrupt Enhancement - disabled
[ KERNEL] [ 2.714816] Multiprocessor Interrupt Enhancement - disabled
[ KERNEL] [ 2.714822] OTG VER PARAM: 0, OTG VER FLAG: 0
[ KERNEL] [ 2.714850] Dedicated Tx FIFOs mode
[ KERNEL] [ 2.715331] WARN::dwc_otg_hcd_init:1053: FIQ DMA bounce buffers: virt = 0xba904000 dma = 0xfa904000 len=9024
[ KERNEL] [ 2.715356] FIQ FSM acceleration enabled for :
[ KERNEL] [ 2.715356] Non-periodic Split Transactions
[ KERNEL] [ 2.715356] Periodic Split Transactions
[ KERNEL] [ 2.715356] High-Speed Isochronous Endpoints
[ KERNEL] [ 2.715356] Interrupt/Control Split Transaction hack enabled
[ KERNEL] [ 2.715362] dwc_otg: Microframe scheduler enabled
[ KERNEL] [ 2.715403] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x80392ef0
[ KERNEL] [ 2.715411] WARN::hcd_init_fiq:460: FIQ ASM at 0x80393254 length 36
[ KERNEL] [ 2.715421] WARN::hcd_init_fiq:486: MPHI regs_base at 0xbb925000
[ KERNEL] [ 2.715475] dwc_otg 3f980000.usb: DWC OTG Controller
[ KERNEL] [ 2.715508] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[ KERNEL] [ 2.715538] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[ KERNEL] [ 2.715583] Init: Port Power? op_state=1
[ KERNEL] [ 2.715587] Init: Power Port (0)
[ KERNEL] [ 2.715765] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ KERNEL] [ 2.715775] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ KERNEL] [ 2.715782] usb usb1: Product: DWC OTG Controller
[ KERNEL] [ 2.715789] usb usb1: Manufacturer: Linux 4.9.20 dwc_otg_hcd
[ KERNEL] [ 2.715796] usb usb1: SerialNumber: 3f980000.usb
[ KERNEL] [ 2.716645] hub 1-0:1.0: USB hub found
[ KERNEL] [ 2.716684] hub 1-0:1.0: 1 port detected
[ KERNEL] [ 2.717350] dwc_otg: FIQ enabled
[ KERNEL] [ 2.717354] dwc_otg: NAK holdoff enabled
[ KERNEL] [ 2.717357] dwc_otg: FIQ split-transaction FSM enabled
[ KERNEL] [ 2.717438] Module dwc_common_port init
[ KERNEL] [ 2.718064] usbcore: registered new interface driver usbtouchscreen
[ KERNEL] [ 2.719601] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[ KERNEL] [ 2.720119] bcm2835-cpufreq: min=600000 max=1200000
[ KERNEL] [ 2.721291] sdhost-bcm2835 3f202000.sdhost: could not get clk, deferring probe
[ KERNEL] [ 2.723858] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[ KERNEL] [ 2.732276] ledtrig-cpu: registered to indicate activity on CPUs
[ KERNEL] [ 2.732435] hidraw: raw HID events driver (C) Jiri Kosina
[ KERNEL] [ 2.732763] usbcore: registered new interface driver usbhid
[ KERNEL] [ 2.732765] usbhid: USB HID core driver
[ KERNEL] [ 2.737365] vchiq: vchiq_init_state: slot_zero = 0xba980000, is_master = 0
[ KERNEL] [ 2.740548] NET: Registered protocol family 17
[ KERNEL] [ 2.740654] Registering SWP/SWPB emulation handler
[ KERNEL] [ 2.741143] registered taskstats version 1
[ KERNEL] [ 2.741360] vc-sm: Videocore shared memory driver
[ KERNEL] [ 2.741366] [vc_sm_connected_init]: start
[ KERNEL] [ 2.749940] [vc_sm_connected_init]: end - returning 0
[ KERNEL] [ 2.753500] sdhost: log_buf @ ba907000 (fa907000)
[ KERNEL] [ 2.832368] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ KERNEL] [ 2.834477] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[ KERNEL] [ 2.834481] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[ KERNEL] [ 2.899519] mmc0: host does not support reading read-only switch, assuming write-enable
[ KERNEL] [ 2.901500] mmc0: new high speed SDHC card at address 59b4
[ KERNEL] [ 2.901957] mmcblk0: mmc0:59b4 USD 3.75 GiB
[ KERNEL] [ 2.903150] mmcblk0: p1
[ KERNEL] [ 2.912494] of_cfs_init
[ KERNEL] [ 2.912549] of_cfs_init: OK
[ KERNEL] [ 2.923070] Freeing unused kernel memory: 4096K (80700000 - 80b00000)
[ KERNEL] [ 2.942471] Indeed it is in host mode hprt0 = 00021501
[ KERNEL] [ 2.944297] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ KERNEL] [ 2.945811] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ KERNEL] [ 2.947344] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ KERNEL] [ 2.950053] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ KERNEL] [ 2.996799] random: fast init done
[ KERNEL] [ 3.036253] mmc1: new high speed SDIO card at address 0001
[ KERNEL] [ 3.142403] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ KERNEL] [ 3.142539] Indeed it is in host mode hprt0 = 00001101
[ hotplug] [ 3.190914] Block device 254:0. No action.
[ hotplug] [ 3.202547] Block device 179:0. No action.
[ hotplug] [ 3.202643] Block device 179:1. No action.
[ pfac] [ 3.246026] Run /sbin/initrd.
[ pfac] [ 3.246303] Ok, PID 590.
[ initrd] [ 3.249849] WTware shell 5.4.86/RPi
[ initrd] [ 3.296694] Local media boot.
[ KERNEL] [ 3.382623] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[ KERNEL] [ 3.382636] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ KERNEL] [ 3.383443] hub 1-1:1.0: USB hub found
[ KERNEL] [ 3.383538] hub 1-1:1.0: 5 ports detected
[ KERNEL] [ 3.702392] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ KERNEL] [ 3.832617] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ KERNEL] [ 3.832628] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ KERNEL] [ 3.932396] usb 1-1.3: new low-speed USB device number 4 using dwc_otg
[ KERNEL] [ 4.076658] usb 1-1.3: New USB device found, idVendor=1bcf, idProduct=0007
[ KERNEL] [ 4.076668] usb 1-1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ KERNEL] [ 4.076676] usb 1-1.3: Product: USB Optical Mouse
[ KERNEL] [ 4.096337] input: USB Optical Mouse as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.0/0003:1BCF:0007.0001/input/input0
[ KERNEL] [ 4.097216] hid-generic 0003:1BCF:0007.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-3f980000.usb-1.3/input0
[ KERNEL] [ 4.412383] usb 1-1.2: new low-speed USB device number 5 using dwc_otg
[ KERNEL] [ 4.562126] dwc_otg: DEVICE:005 : update_urb_state_xfer_comp:743:trimming xfer length
[ KERNEL] [ 4.562280] usb 1-1.2: New USB device found, idVendor=1c4f, idProduct=0002
[ KERNEL] [ 4.562290] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ KERNEL] [ 4.562298] usb 1-1.2: Product: USB Keykoard
[ KERNEL] [ 4.562305] usb 1-1.2: Manufacturer: USB
[ KERNEL] [ 4.573401] input: USB USB Keykoard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:1C4F:0002.0002/input/input1
[ KERNEL] [ 4.643455] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-3f980000.usb-1.2/input0
[ KERNEL] [ 4.652793] input: USB USB Keykoard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.1/0003:1C4F:0002.0003/input/input2
[ KERNEL] [ 4.732840] hid-generic 0003:1C4F:0002.0003: input,hidraw2: USB HID v1.10 Device [USB USB Keykoard] on usb-3f980000.usb-1.2/input1
/--- FILE "/bootmedia/config.txt" -----------------------
| # For more options and information see
| # http://www.raspberrypi.org/documentation/configuration/config-txt.md
| # Some settings may impact device functionality. See link above for details
| # Uncomment if you get no picture on HDMI for a default "safe" mode.
| #hdmi_safe=1
| # Uncomment this if your display has a black border of unused pixels visible
| # and your display can output without overscan.
| disable_overscan=1
| # Uncomment if hdmi display is not detected and composite is being output.
| #hdmi_force_hotplug=1
| # Uncomment to force a specific HDMI mode (this will force VGA).
| #hdmi_group=1
| #hdmi_mode=1
| # Force the monitor to HDMI mode so that sound will be sent over HDMI cable.
| #hdmi_drive=2
| # Uncomment to increase signal to HDMI, if you have interference, blanking, or
| # no display.
| #config_hdmi_boost=4
| # Uncomment to overclock the arm. 700 MHz is the default.
| #arm_freq=800
| disable_splash=1
| #hdmi_group=2
| # 800x600: hdmi_mode=9
| # 1024x768: hdmi_mode=16
| # 1280x1024: hdmi_mode=35
| # 1360x768: hdmi_mode=39
| # 1400x1050: hdmi_mode=42
| # 1440x900: hdmi_mode=47
| # 1600x1200: hdmi_mode=51
| # 1680x1050: hdmi_mode=58
| # 1366x768: hdmi_mode=81
| # 1920x1080: hdmi_mode=82
| # 1920x1200: hdmi_mode=69
| framebuffer_depth=32
| # Uncomment for 16-bit color. It is up to two
| # times faster than default 32-bit.
| #framebuffer_depth=16
| # Enable onboard audio (HDMI or jack).
| dtparam=audio=on
| # Removes the warning overlay.
| #avoid_warnings=1
| # Additionally allows turbo when low-voltage is present.
| #avoid_warnings=2
| hdmi_group=2
| hdmi_mode=35
\----------------------------------------------------
[ initrd] [ 4.791633] WTpassword present: ce24495ceaf77323f10b9d284d84af31.
[ KERNEL] [ 10.583185] random: crng init done
[ initrd] [ 10.581152] Start Setup.
[ initrd] [ 21.109323] Remount /bootmedia for writing.
[ KERNEL] [ 21.111858] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ initrd] [ 21.110880] Remount /bootmedia as read-only.
/--- FILE "/bootmedia/configs/initrd.wtc" -----------------------
| [BOM]
| clientIP=*
| config=local
| setupPassword=cc72aad3323582f495f9cce9c18dded0
\----------------------------------------------------
[ initrd] [ 29.717671] Load ethernet drivers.
[ initrd] [ 29.717796] modprobe smsc95xx.
[ KERNEL] [ 29.727716] smsc95xx v1.0.5
[ KERNEL] [ 29.816232] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:f3:f6:0d
[ KERNEL] [ 29.816431] usbcore: registered new interface driver smsc95xx
[ KERNEL] [ 29.904320] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ KERNEL] [ 31.379620] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
[ initrd] [ 31.405077] WTpassword present: cc72aad3323582f495f9cce9c18dded0.
[ initrd] [ 31.950158] dhcp: 576 bytes from 192.168.1.1.
[ initrd] [ 31.950336] 00000000:0000022C0000000000110000C0A80101FFFFFFFF00430044022C000002010600 ...,................C.D.,......
[ initrd] [ 31.950468] 00000020:67458B6B0000000000000000C0A801220000000000000000B827EBF3F60D0000 gE.k...........".........'......
[ initrd] [ 31.950597] 00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 31.950722] 00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 31.950846] 00000080:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 31.950970] 000000a0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 31.951093] 000000c0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 31.951215] 000000e0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 33.550893] dhcp: 576 bytes from 192.168.1.1.
[ initrd] [ 33.551081] 00000000:0000022C0000000000110000C0A80101FFFFFFFF00430044022C000002010600 ...,................C.D.,......
[ initrd] [ 33.551212] 00000020:67458B6B0000000000000000C0A801220000000000000000B827EBF3F60D0000 gE.k...........".........'......
[ initrd] [ 33.551337] 00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 33.551463] 00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 33.551586] 00000080:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 33.551713] 000000a0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 33.551838] 000000c0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 33.551962] 000000e0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 33.590087] dhcp: server address 192.168.1.1.
[ initrd] [ 33.590198] dhcp: 192.168.1.34/255.255.255.0.
[ initrd] [ 33.590303] dhcp: default gateway 192.168.1.1.
[ initrd] [ 33.590407] dhcp: DNS 192.168.1.1.
[ initrd] [ 33.590513] dhcp: TFTP = DHCP 192.168.1.1.
[ initrd] [ 33.590617] dhcp: TFTP 192.168.1.1.
[ initrd] [ 33.590719] No boot file from DHCP.
[ initrd] [ 33.590821] TFTP binary "", configs prefix "", using "/" slash.
WTC listener is active.
WTC broadcast listener is active.
Send broadcast WTCU discover.
[ initrd] [ 33.593140] Run '/sbin/httpd', log '/tmp/httpd.out', env '', pid ''.
[ pfac] [ 33.593374] Run /sbin/httpd.
[ pfac] [ 33.593626] Ok, PID 640.
[ httpd] [ 33.598472] HTTP Server, WTware 5.4.86/RPi
[ initrd] [ 33.720317] USB: 1bcf:0007 Sunplus Innovation Technology Inc. Optical Mouse.
[ initrd] [ 33.720526] USB: 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter.
[ initrd] [ 33.720658] USB: 0424:9514 Standard Microsystems Corp. SMC9514 Hub.
[ initrd] [ 33.720782] USB: 1c4f:0002 SiGma Micro Keyboard TRACER Gamma Ivory.
[ initrd] [ 33.721222] Copy /bootmedia/configs/config.wtc to /tmp/config.wtc.
[ initrd] [ 33.722458] Common local disk config:
/--- FILE "/tmp/config.wtc" -----------------------
| [BOM]
| server=195.9.61.70:3394
| connection
\----------------------------------------------------
[ initrd] [ 33.723300] Remount /bootmedia for writing.
[ initrd] [ 33.724501] Remount /bootmedia as read-only.
[ KERNEL] [ 33.725800] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
/--- FILE "/etc/config.compiled" -----------------------
| [BOM]
| server=195.9.61.70:3394
| connection
\----------------------------------------------------
[ initrd] [ 33.753392] Hostname: "wtwB827EBF3F60D".
Everyone can control terminal by RSH.
RSH: listener is active.
Send broadcast WTCU discover.
[ httpd] [ 34.106698] Reread settings.
[ httpd] [ 34.106818] Everyone can control terminal by HTTP.
[ gm] [ 34.110767] WTware session manager 5.4.86/RPi.
[ gm] [ 34.111653] Add keyboard event2: USB USB Keykoard.
[ gm] [ 34.111734] Add keyboard event1: USB USB Keykoard.
[ gm] [ 34.180106] EV_REL flag found. Add mouse event0: USB Optical Mouse.
[ gm] [ 34.180321] Display mode: 1280x1024, 32 bit, 0 Hz, modeline "", DDC enabled, connector 0.
[ gm] [ 34.202691] Framebuffer device found.
[ gm] [ 34.202770] LINELENBYTES 5120
[ gm] [ 34.202842] VLEN 5242880
[ gm] [ 34.226021] Use /lib/ui32.so.
[ gm] [ 34.308565] Run '/sbin/resolver 0x161930 dns [195.9.61.70]', log '', env '', pid ''.
[ pfac] [ 34.308717] Run /sbin/resolver 0x161930 dns [195.9.61.70].
[ pfac] [ 34.308960] Ok, PID 642.
[ gm] [ 34.309068] Nobody can control terminal by VNC.
[ pfac] [ 34.313245] Process pid 642 terminated, status 00000000.
[ gm] [ 34.316386] 195.9.61.70 => 195.9.61.70.
[ gm] [ 34.316556] Free ram before fork terminal client /sbin/rdpclient (session 1): 926060 Kb.
[ gm] [ 34.316635] Run '/sbin/rdpclient 1', log '/tmp/rdpclient.out', env '', pid ''.
[ pfac] [ 34.316709] Run /sbin/rdpclient 1.
[ pfac] [ 34.316994] Ok, PID 643.
[ rdpclient 643] [ 34.324495] RDP Terminal Client, WTware 5.4.86/RPi, pipe 1, pid 643.
[ rdpclient 643] [ 34.326693] Use /lib/ui32.so.
[ rdpclient 643] [ 34.326817] Make RDP session with 195.9.61.70, port 3394.
[ rdpclient 643] [ 34.326899] No username.
[ rdpclient 643] [ 34.326976] No password.
[ rdpclient 643] [ 34.327052] No PIN.
[ rdpclient 643] [ 34.327128] No domain.
[ rdpclient 643] [ 34.327203] No shell.
[ rdpclient 643] [ 34.327278] No directory.
[ rdpclient 643] [ 34.327352] Window: 1280x1024@24.
[ rdpclient 643] [ 34.327427] PFlags 0x0000002F.
[ rdpclient 643] [ 34.327503] Keyboard 00000409:00000000.
[ rdpclient 643] [ 34.327578] My hostname "wtwB827EBF3F60D".
[ rdpclient 643] [ 34.327652] TCP: connecting to 195.9.61.70:3394.
[ rdpclient 643] [ 34.335474] TCP: connection with 195.9.61.70:3394 established.
[ rdpclient 643] [ 34.335565] Turn keepalive on.
[ rdpclient 643] [ 34.336446] Free ram after buffers allocation: 925284 KB.
[ rdpclient 643] [ 34.347385] Server supports GFX Pipeline.
[ rdpclient 643] [ 34.371612] Process RDP server certificate.
[ rdpclient 643] [ 34.371701] RDP5 encryption (X.509).
[ rdpclient 643] [ 34.433727] Enable font smoothing and Desktop Composition.
[ rdpclient 643] [ 34.625171] GFX codec.
[ rdpclient 643] [ 35.068062] Run 4 tile threads.
[ httpd] [ 99.345953] Mount /bootmedia as read-only.
[ httpd] [ 99.356901] Umount /bootmedia.