WTware клиент RDP

День добрый, есть ноутбуки с intel ssdpeknw512g8, установить тонкий не пускает, возможная причина нет драйвера.

Добрый. Есть такие специально обученные люди - системные администраторы. Надо отдать компьютер одному из них, они умеют.

вот что обученный человек прислал.
Ноутбук HP Laptop 15s-fq2020ur, в биосе нет возможности включить IDE, там нет таких настроек.

1. Убедиться, что используется самая новая версия втвари.
2. Обновить биос.
3. Сбросить биос в настройки по умолчанию.
4. Убедиться, что биос видит диск.
5. Когда втварь выдаст ошибку, нажать Esc. Будет командная строка. Дальше по методичке, в самом конце "Получение лога, когда нет сети" : https://wtware.ru/logs.html

1. 6.0.32
2.последний F.07 Rev.A 7 дек 2020
3.сброс делали.
4.видит диск ( он NVME)
5. лог через пару часов скинем.

del

del

Вот это не выполнено:

5. Когда втварь выдаст ошибку, нажать Esc. Будет командная строка...

Ошибка - та, что на фотографии выше. Получить ошибку, после ошибки нажать Esc, снять лог. Esc это не Reset и не Ctrl-Alt-Del.

WTware 6.0.20/UEFI supervisor.
[ KERNEL] [ 0.000000] Linux version 5.4.72 (aka@c22) (gcc version 8.3.0 (Debian 8.3.0-6)) #10 SMP Wed Oct 28 19:03:47 UTC 2020
[ KERNEL] [ 0.000000] Command line:
[ KERNEL] [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ KERNEL] [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ KERNEL] [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ KERNEL] [ 0.000000] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'
[ KERNEL] [ 0.000000] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'
[ KERNEL] [ 0.000000] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'
[ KERNEL] [ 0.000000] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
[ KERNEL] [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ KERNEL] [ 0.000000] x86/fpu: xstate_offset[5]: 832, xstate_sizes[5]: 64
[ KERNEL] [ 0.000000] x86/fpu: xstate_offset[6]: 896, xstate_sizes[6]: 512
[ KERNEL] [ 0.000000] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024
[ KERNEL] [ 0.000000] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]: 8
[ KERNEL] [ 0.000000] x86/fpu: Enabled xstate features 0x2e7, context size is 2440 bytes, using 'compacted' format.
[ KERNEL] [ 0.000000] BIOS-provided physical RAM map:
[ KERNEL] [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[ KERNEL] [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[ KERNEL] [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000069f1cfff] usable
[ KERNEL] [ 0.000000] BIOS-e820: [mem 0x0000000069f1d000-0x000000006d01cfff] reserved
[ KERNEL] [ 0.000000] BIOS-e820: [mem 0x000000006d01d000-0x000000006d0e8fff] ACPI data
[ KERNEL] [ 0.000000] BIOS-e820: [mem 0x000000006d0e9000-0x000000006d18afff] ACPI NVS
[ KERNEL] [ 0.000000] BIOS-e820: [mem 0x000000006d18b000-0x0000000071efefff] reserved
[ KERNEL] [ 0.000000] BIOS-e820: [mem 0x0000000071eff000-0x0000000071efffff] usable
[ KERNEL] [ 0.000000] BIOS-e820: [mem 0x0000000071f00000-0x0000000079ffffff] reserved
[ KERNEL] [ 0.000000] BIOS-e820: [mem 0x000000007aa00000-0x000000007abfffff] reserved
[ KERNEL] [ 0.000000] BIOS-e820: [mem 0x000000007b000000-0x00000000803fffff] reserved
[ KERNEL] [ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
[ KERNEL] [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ KERNEL] [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ KERNEL] [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ KERNEL] [ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
[ KERNEL] [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ KERNEL] [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ KERNEL] [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fbfffff] usable
[ KERNEL] [ 0.000000] NX (Execute Disable) protection: active
[ KERNEL] [ 0.000000] efi: EFI v2.70 by American Megatrends
[ KERNEL] [ 0.000000] efi: ACPI=0x6d0e8000 ACPI 2.0=0x6d0e8014 SMBIOS=0x71ca4000 SMBIOS 3.0=0x71ca3000 ESRT=0x6895cb98
[ KERNEL] [ 0.000000] SMBIOS 3.3.0 present.
[ KERNEL] [ 0.000000] DMI: HP HP Laptop 15s-fq2xxx/87FE, BIOS F.07 12/01/2020
[ KERNEL] [ 0.000000] tsc: Detected 2000.000 MHz processor
[ KERNEL] [ 0.000283] tsc: Detected 1996.800 MHz TSC
[ KERNEL] [ 0.000283] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ KERNEL] [ 0.000284] e820: remove [mem 0x000a0000-0x000fffff] usable
[ KERNEL] [ 0.000289] last_pfn = 0x27fc00 max_arch_pfn = 0x400000000
[ KERNEL] [ 0.000290] MTRR default type: write-back
[ KERNEL] [ 0.000291] MTRR fixed ranges enabled:
[ KERNEL] [ 0.000291] 00000-9FFFF write-back
[ KERNEL] [ 0.000292] A0000-BFFFF uncachable
[ KERNEL] [ 0.000292] C0000-FFFFF write-protect
[ KERNEL] [ 0.000292] MTRR variable ranges enabled:
[ KERNEL] [ 0.000293] 0 base 0080000000 mask 7F80000000 uncachable
[ KERNEL] [ 0.000294] 1 base 007C000000 mask 7FFC000000 uncachable
[ KERNEL] [ 0.000294] 2 base 2000000000 mask 6000000000 uncachable
[ KERNEL] [ 0.000294] 3 base 1000000000 mask 7000000000 uncachable
[ KERNEL] [ 0.000295] 4 base 0800000000 mask 7800000000 uncachable
[ KERNEL] [ 0.000295] 5 base 0400000000 mask 7C00000000 uncachable
[ KERNEL] [ 0.000295] 6 base 4000000000 mask 4000000000 uncachable
[ KERNEL] [ 0.000296] 7 disabled
[ KERNEL] [ 0.000296] 8 disabled
[ KERNEL] [ 0.000296] 9 disabled
[ KERNEL] [ 0.000704] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ KERNEL] [ 0.000848] last_pfn = 0x71f00 max_arch_pfn = 0x400000000
[ KERNEL] [ 0.007755] esrt: Reserving ESRT space from 0x000000006895cb98 to 0x000000006895cbd0.
[ KERNEL] [ 0.007759] e820: update [mem 0x6895c000-0x6895cfff] usable ==> reserved
[ KERNEL] [ 0.007771] Using GB pages for direct mapping
[ KERNEL] [ 0.008008] Secure boot disabled
[ KERNEL] [ 0.008020] ACPI: Early table checksum verification disabled
[ KERNEL] [ 0.008022] ACPI: RSDP 0x000000006D0E8014 000024 (v02 HPQOEM)
[ KERNEL] [ 0.008023] ACPI: XSDT 0x000000006D0E7728 0000F4 (v01 HPQOEM SLIC-MPC 01072009 AMI 01000013)
[ KERNEL] [ 0.008027] ACPI: FACP 0x000000006D0E2000 000114 (v06 HPQOEM SLIC-MPC 01072009 HP 00010013)
[ KERNEL] [ 0.008030] ACPI: DSDT 0x000000006D08F000 052F83 (v02 HPQOEM 87FE 01072009 ACPI 20191018)
[ KERNEL] [ 0.008032] ACPI: FACS 0x000000006D187000 000040
[ KERNEL] [ 0.008033] ACPI: MCFG 0x000000006D0E6000 00003C (v01 HPQOEM 87FE 01072009 HP 00000097)
[ KERNEL] [ 0.008035] ACPI: SSDT 0x000000006D0E3000 0025CF (v02 HPQOEM 87FE 00003000 ACPI 20191018)
[ KERNEL] [ 0.008036] ACPI: FIDT 0x000000006D08E000 00009C (v01 HPQOEM 87FE 01072009 HP 00010013)
[ KERNEL] [ 0.008038] ACPI: SSDT 0x000000006D08A000 0032D3 (v02 HPQOEM 87FE 00001000 ACPI 20191018)
[ KERNEL] [ 0.008040] ACPI: SSDT 0x000000006D087000 002B59 (v02 SaSsdt SaSsdt 00003000 INTL 20191018)
[ KERNEL] [ 0.008041] ACPI: SSDT 0x000000006D083000 003350 (v02 HPQOEM 87FE 00003000 ACPI 20191018)
[ KERNEL] [ 0.008043] ACPI: HPET 0x000000006D082000 000038 (v01 HPQOEM 87FE 01072009 HP 01000013)
[ KERNEL] [ 0.008044] ACPI: APIC 0x000000006D081000 00012C (v04 HPQOEM 87FE 01072009 HP 01000013)
[ KERNEL] [ 0.008046] ACPI: NHLT 0x000000006D07F000 0018CE (v00 HPQOEM 87FE 01072009 HP 01000013)
[ KERNEL] [ 0.008047] ACPI: LPIT 0x000000006D07E000 0000CC (v01 HPQOEM 87FE 01072009 HP 01000013)
[ KERNEL] [ 0.008049] ACPI: SSDT 0x000000006D07A000 002720 (v02 HPQOEM 87FE 00001000 ACPI 20191018)
[ KERNEL] [ 0.008050] ACPI: SSDT 0x000000006D079000 00012A (v02 HPQOEM 87FE 00000000 ACPI 20191018)
[ KERNEL] [ 0.008052] ACPI: DBGP 0x000000006D078000 000034 (v01 HPQOEM 87FE 01072009 HP 01000013)
[ KERNEL] [ 0.008054] ACPI: DBG2 0x000000006D077000 000054 (v00 HPQOEM 87FE 01072009 HP 01000013)
[ KERNEL] [ 0.008055] ACPI: SSDT 0x000000006D076000 000BA3 (v02 HPQOEM 87FE 00001000 ACPI 20191018)
[ KERNEL] [ 0.008057] ACPI: DMAR 0x000000006D075000 000088 (v02 HPQOEM 87FE 00000002 HP 01000013)
[ KERNEL] [ 0.008058] ACPI: SSDT 0x000000006D074000 000694 (v02 HPQOEM 87FE 00000000 ACPI 20191018)
[ KERNEL] [ 0.008060] ACPI: SSDT 0x000000006D073000 000144 (v02 HPQOEM 87FE 00001000 ACPI 20191018)
[ KERNEL] [ 0.008061] ACPI: SSDT 0x000000006D072000 000060 (v01 HPQOEM 87FE 00000001 ACPI 20191018)
[ KERNEL] [ 0.008063] ACPI: UEFI 0x000000006D147000 00063A (v01 HPQOEM 87FE 00000000 HP 00000000)
[ KERNEL] [ 0.008064] ACPI: UEFI 0x000000006D146000 00005C (v01 HPQOEM 87FE 00000000 HP 00000000)
[ KERNEL] [ 0.008066] ACPI: PTDT 0x000000006D071000 000CFE (v00 HPQOEM 87FE 00000005 HP 0100000D)
[ KERNEL] [ 0.008067] ACPI: WSMT 0x000000006D07D000 000028 (v01 HPQOEM 87FE 01072009 HP 00010013)
[ KERNEL] [ 0.008069] ACPI: FPDT 0x000000006D070000 000044 (v01 HPQOEM 87FE 01072009 HP 01000013)
[ KERNEL] [ 0.008070] ACPI: BGRT 0x000000006D06F000 000038 (v01 HPQOEM 87FE 01072009 HP 00010013)
[ KERNEL] [ 0.008075] ACPI: Local APIC address 0xfee00000
[ KERNEL] [ 0.008086] Zone ranges:
[ KERNEL] [ 0.008086] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ KERNEL] [ 0.008087] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ KERNEL] [ 0.008087] Normal [mem 0x0000000100000000-0x000000027fbfffff]
[ KERNEL] [ 0.008088] Movable zone start for each node
[ KERNEL] [ 0.008088] Early memory node ranges
[ KERNEL] [ 0.008089] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ KERNEL] [ 0.008089] node 0: [mem 0x0000000000100000-0x0000000069f1cfff]
[ KERNEL] [ 0.008090] node 0: [mem 0x0000000071eff000-0x0000000071efffff]
[ KERNEL] [ 0.008090] node 0: [mem 0x0000000100000000-0x000000027fbfffff]
[ KERNEL] [ 0.008508] Zeroed struct page in unavailable ranges: 58692 pages
[ KERNEL] [ 0.008510] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fbfffff]
[ KERNEL] [ 0.008511] On node 0 totalpages: 2005692
[ KERNEL] [ 0.008512] DMA zone: 64 pages used for memmap
[ KERNEL] [ 0.008512] DMA zone: 24 pages reserved
[ KERNEL] [ 0.008513] DMA zone: 3998 pages, LIFO batch:0
[ KERNEL] [ 0.008552] DMA32 zone: 6717 pages used for memmap
[ KERNEL] [ 0.008553] DMA32 zone: 429854 pages, LIFO batch:63
[ KERNEL] [ 0.013082] Normal zone: 24560 pages used for memmap
[ KERNEL] [ 0.013083] Normal zone: 1571840 pages, LIFO batch:63
[ KERNEL] [ 0.023849] Reserving Intel graphics memory at [mem 0x7c800000-0x803fffff]
[ KERNEL] [ 0.024121] ACPI: PM-Timer IO Port: 0x1808
[ KERNEL] [ 0.024122] ACPI: Local APIC address 0xfee00000
[ KERNEL] [ 0.024126] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ KERNEL] [ 0.024126] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ KERNEL] [ 0.024127] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ KERNEL] [ 0.024127] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ KERNEL] [ 0.024127] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ KERNEL] [ 0.024127] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ KERNEL] [ 0.024128] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ KERNEL] [ 0.024128] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ KERNEL] [ 0.024128] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[ KERNEL] [ 0.024129] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[ KERNEL] [ 0.024129] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[ KERNEL] [ 0.024129] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[ KERNEL] [ 0.024129] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
[ KERNEL] [ 0.024130] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
[ KERNEL] [ 0.024130] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
[ KERNEL] [ 0.024130] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
[ KERNEL] [ 0.024166] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ KERNEL] [ 0.024168] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ KERNEL] [ 0.024169] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ KERNEL] [ 0.024169] ACPI: IRQ0 used by override.
[ KERNEL] [ 0.024170] ACPI: IRQ9 used by override.
[ KERNEL] [ 0.024171] Using ACPI (MADT) for SMP configuration information
[ KERNEL] [ 0.024172] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ KERNEL] [ 0.024178] e820: update [mem 0x674d4000-0x674e7fff] usable ==> reserved
[ KERNEL] [ 0.024184] TSC deadline timer available
[ KERNEL] [ 0.024185] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ KERNEL] [ 0.024194] [mem 0x80400000-0xbfffffff] available for PCI devices
[ KERNEL] [ 0.024195] Booting paravirtualized kernel on bare hardware
[ KERNEL] [ 0.024197] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ KERNEL] [ 0.067484] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ KERNEL] [ 0.067579] percpu: Embedded 42 pages/cpu s132376 r8192 d31464 u524288
[ KERNEL] [ 0.067583] pcpu-alloc: s132376 r8192 d31464 u524288 alloc=1*2097152
[ KERNEL] [ 0.067584] pcpu-alloc: [0] 0 1 2 3
[ KERNEL] [ 0.067597] Built 1 zonelists, mobility grouping on. Total pages: 1974327
[ KERNEL] [ 0.067598] Kernel command line: quiet
[ KERNEL] [ 0.067900] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ KERNEL] [ 0.068049] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ KERNEL] [ 0.068082] mem auto-init: stack:off, heap alloc:off, heap free:off
[ KERNEL] [ 0.082397] Memory: 7715488K/8022768K available (8194K kernel code, 391K rwdata, 1764K rodata, 3112K init, 444K bss, 307280K reserved, 0K cma-reserved)
[ KERNEL] [ 0.082426] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ KERNEL] [ 0.082452] rcu: Hierarchical RCU implementation.
[ KERNEL] [ 0.082453] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ KERNEL] [ 0.082479] NR_IRQS: 4352, nr_irqs: 1024, preallocated irqs: 16
[ KERNEL] [ 0.082917] random: crng done (trusting CPU's manufacturer)
[ KERNEL] [ 0.082930] Console: colour dummy device 80x25
[ KERNEL] [ 0.082932] printk: console [tty0] enabled
[ KERNEL] [ 0.082935] ACPI: Core revision 20190816
[ KERNEL] [ 0.083236] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns
[ KERNEL] [ 0.083356] APIC: Switch to symmetric I/O mode setup
[ KERNEL] [ 0.083357] DMAR: Host address width 39
[ KERNEL] [ 0.083358] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ KERNEL] [ 0.083362] DMAR: dmar0: reg_base_addr fed90000 ver 4:0 cap 1c0000c40660462 ecap 69e2ff0505e
[ KERNEL] [ 0.083363] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ KERNEL] [ 0.083367] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ KERNEL] [ 0.083368] DMAR: RMRR base: 0x0000007c000000 end: 0x000000803fffff
[ KERNEL] [ 0.083370] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ KERNEL] [ 0.083370] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ KERNEL] [ 0.083371] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ KERNEL] [ 0.084928] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ KERNEL] [ 0.084929] x2apic enabled
[ KERNEL] [ 0.084958] Switched APIC routing to cluster x2apic.
[ KERNEL] [ 0.089619] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ KERNEL] [ 0.107295] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3990bec8342, max_idle_ns: 881590769617 ns
[ KERNEL] [ 0.107299] Calibrating delay loop (skipped), value calculated using timer frequency.. 3993.60 BogoMIPS (lpj=7987200)
[ KERNEL] [ 0.107300] pid_max: default: 32768 minimum: 301
[ KERNEL] [ 0.109413] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ KERNEL] [ 0.109444] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ KERNEL] [ 0.109559] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[ KERNEL] [ 0.109583] mce: CPU0: Thermal monitoring enabled (TM1)
[ KERNEL] [ 0.109655] process: using mwait in idle threads
[ KERNEL] [ 0.109656] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ KERNEL] [ 0.109657] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ KERNEL] [ 0.109659] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ KERNEL] [ 0.109660] Spectre V2 : Mitigation: Enhanced IBRS
[ KERNEL] [ 0.109660] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ KERNEL] [ 0.109661] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ KERNEL] [ 0.109662] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ KERNEL] [ 0.109782] Freeing SMP alternatives memory: 20K
[ KERNEL] [ 0.110359] smpboot: CPU0: Intel(R) Pentium(R) Gold 7505 @ 2.00GHz (family: 0x6, model: 0x8c, stepping: 0x1)
[ KERNEL] [ 0.110397] Performance Events: PEBS fmt4+-baseline, Icelake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ KERNEL] [ 0.110402] ... version: 5
[ KERNEL] [ 0.110402] ... bit width: 48
[ KERNEL] [ 0.110402] ... generic registers: 8
[ KERNEL] [ 0.110403] ... value mask: 0000ffffffffffff
[ KERNEL] [ 0.110403] ... max period: 00007fffffffffff
[ KERNEL] [ 0.110403] ... fixed-purpose events: 4
[ KERNEL] [ 0.110403] ... event mask: 0000000f000000ff
[ KERNEL] [ 0.110425] rcu: Hierarchical SRCU implementation.
[ KERNEL] [ 0.110459] smp: Bringing up secondary CPUs ...
[ KERNEL] [ 0.110488] x86: Booting SMP configuration:
[ KERNEL] [ 0.110489] .... node #0, CPUs: #1 #2 #3
[ KERNEL] [ 0.111050] smp: Brought up 1 node, 4 CPUs
[ KERNEL] [ 0.111050] smpboot: Max logical packages: 1
[ KERNEL] [ 0.111050] smpboot: Total of 4 processors activated (15974.40 BogoMIPS)
[ KERNEL] [ 0.111050] devtmpfs: initialized
[ KERNEL] [ 0.111050] PM: Registering ACPI NVS region [mem 0x6d0e9000-0x6d18afff] (663552 bytes)
[ KERNEL] [ 0.111050] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ KERNEL] [ 0.111050] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ KERNEL] [ 0.111050] pinctrl core: initialized pinctrl subsystem
[ KERNEL] [ 0.111050] NET: Registered protocol family 16
[ KERNEL] [ 0.111050] cpuidle: using governor ladder
[ KERNEL] [ 0.111050] cpuidle: using governor menu
[ KERNEL] [ 0.111050] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ KERNEL] [ 0.111050] ACPI: bus type PCI registered
[ KERNEL] [ 0.111050] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000)
[ KERNEL] [ 0.111050] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved in E820
[ KERNEL] [ 0.111050] PCI: Using configuration type 1 for base access
[ KERNEL] [ 0.111050] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ KERNEL] [ 0.111511] ACPI: Added _OSI(Module Device)
[ KERNEL] [ 0.111511] ACPI: Added _OSI(Processor Device)
[ KERNEL] [ 0.111511] ACPI: Added _OSI(3.0 _SCP Extensions)
[ KERNEL] [ 0.111511] ACPI: Added _OSI(Processor Aggregator Device)
[ KERNEL] [ 0.111511] ACPI: Added _OSI(Linux-Dell-Video)
[ KERNEL] [ 0.111511] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ KERNEL] [ 0.111511] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ KERNEL] [ 0.149661] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS01._UPC], AE_ALREADY_EXISTS (20190816/dswload2-327)
[ KERNEL] [ 0.149665] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190816/psobject-221)
[ KERNEL] [ 0.149666] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ KERNEL] [ 0.149667] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS01._PLD], AE_ALREADY_EXISTS (20190816/dswload2-327)
[ KERNEL] [ 0.149668] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190816/psobject-221)
[ KERNEL] [ 0.149669] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ KERNEL] [ 0.149764] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS02._UPC], AE_ALREADY_EXISTS (20190816/dswload2-327)
[ KERNEL] [ 0.149765] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190816/psobject-221)
[ KERNEL] [ 0.149766] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ KERNEL] [ 0.149766] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS02._PLD], AE_ALREADY_EXISTS (20190816/dswload2-327)
[ KERNEL] [ 0.149768] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190816/psobject-221)
[ KERNEL] [ 0.149768] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ KERNEL] [ 0.149770] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS03._UPC], AE_ALREADY_EXISTS (20190816/dswload2-327)
[ KERNEL] [ 0.149771] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190816/psobject-221)
[ KERNEL] [ 0.149771] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ KERNEL] [ 0.149772] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.HS03._PLD], AE_ALREADY_EXISTS (20190816/dswload2-327)
[ KERNEL] [ 0.149773] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190816/psobject-221)
[ KERNEL] [ 0.149774] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ KERNEL] [ 0.149780] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS01._UPC], AE_ALREADY_EXISTS (20190816/dswload2-327)
[ KERNEL] [ 0.149782] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190816/psobject-221)
[ KERNEL] [ 0.149782] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ KERNEL] [ 0.149783] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS01._PLD], AE_ALREADY_EXISTS (20190816/dswload2-327)
[ KERNEL] [ 0.149784] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190816/psobject-221)
[ KERNEL] [ 0.149784] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ KERNEL] [ 0.149786] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS02._UPC], AE_ALREADY_EXISTS (20190816/dswload2-327)
[ KERNEL] [ 0.149787] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190816/psobject-221)
[ KERNEL] [ 0.149787] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ KERNEL] [ 0.149788] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS02._PLD], AE_ALREADY_EXISTS (20190816/dswload2-327)
[ KERNEL] [ 0.149789] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190816/psobject-221)
[ KERNEL] [ 0.149789] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ KERNEL] [ 0.149791] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS03._UPC], AE_ALREADY_EXISTS (20190816/dswload2-327)
[ KERNEL] [ 0.149792] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190816/psobject-221)
[ KERNEL] [ 0.149792] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ KERNEL] [ 0.149793] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS03._PLD], AE_ALREADY_EXISTS (20190816/dswload2-327)
[ KERNEL] [ 0.149794] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190816/psobject-221)
[ KERNEL] [ 0.149795] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ KERNEL] [ 0.149796] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS04._UPC], AE_ALREADY_EXISTS (20190816/dswload2-327)
[ KERNEL] [ 0.149797] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190816/psobject-221)
[ KERNEL] [ 0.149798] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ KERNEL] [ 0.149798] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS04._PLD], AE_ALREADY_EXISTS (20190816/dswload2-327)
[ KERNEL] [ 0.149799] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190816/psobject-221)
[ KERNEL] [ 0.149800] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ KERNEL] [ 0.149801] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS05._UPC], AE_ALREADY_EXISTS (20190816/dswload2-327)
[ KERNEL] [ 0.149802] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190816/psobject-221)
[ KERNEL] [ 0.149803] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ KERNEL] [ 0.149803] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS05._PLD], AE_ALREADY_EXISTS (20190816/dswload2-327)
[ KERNEL] [ 0.149804] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190816/psobject-221)
[ KERNEL] [ 0.149805] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ KERNEL] [ 0.149806] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS06._UPC], AE_ALREADY_EXISTS (20190816/dswload2-327)
[ KERNEL] [ 0.149807] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190816/psobject-221)
[ KERNEL] [ 0.149808] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ KERNEL] [ 0.149808] ACPI BIOS Error (bug): Failure creating named object [\_SB.PC00.XHCI.RHUB.SS06._PLD], AE_ALREADY_EXISTS (20190816/dswload2-327)
[ KERNEL] [ 0.149809] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190816/psobject-221)
[ KERNEL] [ 0.149810] ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014)
[ KERNEL] [ 0.150118] ACPI: 11 ACPI AML tables successfully acquired and loaded
[ KERNEL] [ 0.156808] ACPI: Dynamic OEM Table Load:
[ KERNEL] [ 0.156815] ACPI: SSDT 0xFFFF9291B6270600 0001B8 (v02 PmRef Cpu0Psd 00003000 INTL 20191018)
[ KERNEL] [ 0.157626] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
[ KERNEL] [ 0.158099] ACPI: Dynamic OEM Table Load:
[ KERNEL] [ 0.158103] ACPI: SSDT 0xFFFF9291B621A400 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20191018)
[ KERNEL] [ 0.159002] ACPI: Dynamic OEM Table Load:
[ KERNEL] [ 0.159006] ACPI: SSDT 0xFFFF9291B5D7B000 00053F (v02 PmRef Cpu0Ist 00003000 INTL 20191018)
[ KERNEL] [ 0.159943] ACPI: Dynamic OEM Table Load:
[ KERNEL] [ 0.159946] ACPI: SSDT 0xFFFF9291B6270800 000128 (v02 PmRef Cpu0Hwp 00003000 INTL 20191018)
[ KERNEL] [ 0.160944] ACPI: Dynamic OEM Table Load:
[ KERNEL] [ 0.160948] ACPI: SSDT 0xFFFF9291B625C000 0008E7 (v02 PmRef ApIst 00003000 INTL 20191018)
[ KERNEL] [ 0.161933] ACPI: Dynamic OEM Table Load:
[ KERNEL] [ 0.161937] ACPI: SSDT 0xFFFF9291B5D7C800 00048A (v02 PmRef ApHwp 00003000 INTL 20191018)
[ KERNEL] [ 0.162870] ACPI: Dynamic OEM Table Load:
[ KERNEL] [ 0.162875] ACPI: SSDT 0xFFFF9291B5D7D000 0004D2 (v02 PmRef ApPsd 00003000 INTL 20191018)
[ KERNEL] [ 0.163802] ACPI: Dynamic OEM Table Load:
[ KERNEL] [ 0.163806] ACPI: SSDT 0xFFFF9291B5D7D800 00048A (v02 PmRef ApCst 00003000 INTL 20191018)
[ KERNEL] [ 0.165395] ACPI: EC: EC started
[ KERNEL] [ 0.165395] ACPI: EC: interrupt blocked
[ KERNEL] [ 0.175795] ACPI: \_SB_.PC00.LPCB.EC0_: Used as first EC
[ KERNEL] [ 0.175796] ACPI: \_SB_.PC00.LPCB.EC0_: GPE=0x6e, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ KERNEL] [ 0.175797] ACPI: \_SB_.PC00.LPCB.EC0_: Boot DSDT EC used to handle transactions
[ KERNEL] [ 0.175797] ACPI: Interpreter enabled
[ KERNEL] [ 0.175824] ACPI: (supports S0 S5)
[ KERNEL] [ 0.175824] ACPI: Using IOAPIC for interrupt routing
[ KERNEL] [ 0.175855] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ KERNEL] [ 0.176145] ACPI: Enabled 7 GPEs in block 00 to 7F
[ KERNEL] [ 0.187305] ACPI: Power Resource [V0PR] (on)
[ KERNEL] [ 0.187305] ACPI: Power Resource [V1PR] (on)
[ KERNEL] [ 0.187305] ACPI: Power Resource [V2PR] (on)
[ KERNEL] [ 0.188649] ACPI: Power Resource [WRST] (on)
[ KERNEL] [ 0.189306] ACPI: Power Resource [V0PR] (on)
[ KERNEL] [ 0.189338] ACPI: Power Resource [V1PR] (on)
[ KERNEL] [ 0.189369] ACPI: Power Resource [V2PR] (on)
[ KERNEL] [ 0.189399] ACPI: Power Resource [V3PR] (on)
[ KERNEL] [ 0.192496] ACPI: Power Resource [PIN] (off)
[ KERNEL] [ 0.192703] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe])
[ KERNEL] [ 0.192706] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ KERNEL] [ 0.193960] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability LTR]
[ KERNEL] [ 0.193960] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ KERNEL] [ 0.194111] PCI host bridge to bus 0000:00
[ KERNEL] [ 0.194113] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ KERNEL] [ 0.194113] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ KERNEL] [ 0.194114] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ KERNEL] [ 0.194114] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ KERNEL] [ 0.194115] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ KERNEL] [ 0.194115] pci_bus 0000:00: root bus resource [mem 0x80400000-0xbfffffff window]
[ KERNEL] [ 0.194116] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window]
[ KERNEL] [ 0.194117] pci_bus 0000:00: root bus resource [bus 00-fe]
[ KERNEL] [ 0.194128] pci 0000:00:00.0: [8086:9a04] type 00 class 0x060000
[ KERNEL] [ 0.195304] pci 0000:00:02.0: [8086:9a78] type 00 class 0x030000
[ KERNEL] [ 0.195304] pci 0000:00:02.0: reg 0x10: [mem 0x6002000000-0x6002ffffff 64bit]
[ KERNEL] [ 0.195304] pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref]
[ KERNEL] [ 0.195304] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
[ KERNEL] [ 0.195304] pci 0000:00:02.0: BAR 2: assigned to efifb
[ KERNEL] [ 0.195304] pci 0000:00:04.0: [8086:9a03] type 00 class 0x118000
[ KERNEL] [ 0.195304] pci 0000:00:04.0: reg 0x10: [mem 0x6003200000-0x600321ffff 64bit]
[ KERNEL] [ 0.195304] pci 0000:00:08.0: [8086:9a11] type 00 class 0x088000
[ KERNEL] [ 0.195304] pci 0000:00:08.0: reg 0x10: [mem 0x600323d000-0x600323dfff 64bit]
[ KERNEL] [ 0.195310] pci 0000:00:0e.0: [8086:9a0b] type 00 class 0x010400
[ KERNEL] [ 0.195310] pci 0000:00:0e.0: reg 0x10: [mem 0x6000000000-0x6001ffffff 64bit]
[ KERNEL] [ 0.195310] pci 0000:00:0e.0: reg 0x18: [mem 0x82000000-0x83ffffff]
[ KERNEL] [ 0.195310] pci 0000:00:0e.0: reg 0x20: [mem 0x6003100000-0x60031fffff 64bit]
[ KERNEL] [ 0.195310] pci 0000:00:14.0: [8086:a0ed] type 00 class 0x0c0330
[ KERNEL] [ 0.195310] pci 0000:00:14.0: reg 0x10: [mem 0x6003220000-0x600322ffff 64bit]
[ KERNEL] [ 0.195310] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ KERNEL] [ 0.195486] pci 0000:00:14.2: [8086:a0ef] type 00 class 0x050000
[ KERNEL] [ 0.195510] pci 0000:00:14.2: reg 0x10: [mem 0x6003234000-0x6003237fff 64bit]
[ KERNEL] [ 0.195523] pci 0000:00:14.2: reg 0x18: [mem 0x600323c000-0x600323cfff 64bit]
[ KERNEL] [ 0.195731] pci 0000:00:15.0: [8086:a0e8] type 00 class 0x0c8000
[ KERNEL] [ 0.195766] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ KERNEL] [ 0.196068] pci 0000:00:15.1: [8086:a0e9] type 00 class 0x0c8000
[ KERNEL] [ 0.196104] pci 0000:00:15.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ KERNEL] [ 0.196440] pci 0000:00:16.0: [8086:a0e0] type 00 class 0x078000
[ KERNEL] [ 0.196471] pci 0000:00:16.0: reg 0x10: [mem 0x6003239000-0x6003239fff 64bit]
[ KERNEL] [ 0.196557] pci 0000:00:16.0: PME# supported from D3hot
[ KERNEL] [ 0.196736] pci 0000:00:1c.0: [8086:a0bf] type 01 class 0x060400
[ KERNEL] [ 0.196844] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ KERNEL] [ 0.197023] pci 0000:00:1d.0: [8086:09ab] type 00 class 0x088000
[ KERNEL] [ 0.197200] pci 0000:00:1f.0: [8086:a082] type 00 class 0x060100
[ KERNEL] [ 0.197433] pci 0000:00:1f.3: [8086:a0c8] type 00 class 0x040100
[ KERNEL] [ 0.197490] pci 0000:00:1f.3: reg 0x10: [mem 0x6003230000-0x6003233fff 64bit]
[ KERNEL] [ 0.197543] pci 0000:00:1f.3: reg 0x20: [mem 0x6003000000-0x60030fffff 64bit]
[ KERNEL] [ 0.197653] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ KERNEL] [ 0.197819] pci 0000:00:1f.4: [8086:a0a3] type 00 class 0x0c0500
[ KERNEL] [ 0.197846] pci 0000:00:1f.4: reg 0x10: [mem 0x6003238000-0x60032380ff 64bit]
[ KERNEL] [ 0.197876] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf]
[ KERNEL] [ 0.198019] pci 0000:00:1f.5: [8086:a0a4] type 00 class 0x0c8000
[ KERNEL] [ 0.198040] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[ KERNEL] [ 0.199302] pci 0000:01:00.0: [10ec:c821] type 00 class 0x028000
[ KERNEL] [ 0.199302] pci 0000:01:00.0: reg 0x10: [io 0x3000-0x30ff]
[ KERNEL] [ 0.199302] pci 0000:01:00.0: reg 0x18: [mem 0x84000000-0x8400ffff 64bit]
[ KERNEL] [ 0.199302] pci 0000:01:00.0: supports D1 D2
[ KERNEL] [ 0.199302] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ KERNEL] [ 0.199304] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ KERNEL] [ 0.199304] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ KERNEL] [ 0.199304] pci 0000:00:1c.0: bridge window [mem 0x84000000-0x840fffff]
[ KERNEL] [ 0.199304] pci_bus 0000:00: on NUMA node 0
[ KERNEL] [ 0.199311] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ KERNEL] [ 0.199311] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *1
[ KERNEL] [ 0.199327] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ KERNEL] [ 0.199381] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ KERNEL] [ 0.199436] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ KERNEL] [ 0.199491] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ KERNEL] [ 0.199546] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ KERNEL] [ 0.199600] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ KERNEL] [ 0.208774] ACPI: EC: interrupt unblocked
[ KERNEL] [ 0.208785] ACPI: EC: event unblocked
[ KERNEL] [ 0.208804] ACPI: \_SB_.PC00.LPCB.EC0_: GPE=0x6e, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ KERNEL] [ 0.208805] ACPI: \_SB_.PC00.LPCB.EC0_: Boot DSDT EC used to handle transactions and events
[ KERNEL] [ 0.208843] iommu: Default domain type: Translated
[ KERNEL] [ 0.208851] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ KERNEL] [ 0.208851] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ KERNEL] [ 0.208851] pci 0000:00:02.0: vgaarb: bridge control possible
[ KERNEL] [ 0.208851] vgaarb: loaded
[ KERNEL] [ 0.208851] ACPI: bus type USB registered
[ KERNEL] [ 0.208851] usbcore: registered new interface driver usbfs
[ KERNEL] [ 0.208851] usbcore: registered new interface driver hub
[ KERNEL] [ 0.208851] usbcore: registered new device driver usb
[ KERNEL] [ 0.208851] pps_core: LinuxPPS API ver. 1 registered
[ KERNEL] [ 0.208851] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ KERNEL] [ 0.208851] PTP clock support registered
[ KERNEL] [ 0.208851] Registered efivars operations
[ KERNEL] [ 0.208851] PCI: Using ACPI for IRQ routing
[ KERNEL] [ 0.229679] PCI: pci_cache_line_size set to 64 bytes
[ KERNEL] [ 0.229766] pci 0000:00:1f.5: can't claim BAR 0 [mem 0xfe010000-0xfe010fff]: no compatible bridge window
[ KERNEL] [ 0.229845] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ KERNEL] [ 0.229846] e820: reserve RAM buffer [mem 0x674d4000-0x67ffffff]
[ KERNEL] [ 0.229846] e820: reserve RAM buffer [mem 0x6895c000-0x6bffffff]
[ KERNEL] [ 0.229847] e820: reserve RAM buffer [mem 0x69f1d000-0x6bffffff]
[ KERNEL] [ 0.229847] e820: reserve RAM buffer [mem 0x71f00000-0x73ffffff]
[ KERNEL] [ 0.229847] e820: reserve RAM buffer [mem 0x27fc00000-0x27fffffff]
[ KERNEL] [ 0.229924] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ KERNEL] [ 0.231302] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ KERNEL] [ 0.231325] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ KERNEL] [ 0.231325] hpet0: 8 comparators, 64-bit 19.200000 MHz counter
[ KERNEL] [ 0.232327] clocksource: Switched to clocksource tsc-early
[ KERNEL] [ 0.232353] pnp: PnP ACPI init
[ KERNEL] [ 0.232464] system 00:00: [io 0x0680-0x069f] has been reserved
[ KERNEL] [ 0.232465] system 00:00: [io 0x164e-0x164f] has been reserved
[ KERNEL] [ 0.232468] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ KERNEL] [ 0.232494] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ KERNEL] [ 0.232549] system 00:02: [io 0x1854-0x1857] has been reserved
[ KERNEL] [ 0.232551] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ KERNEL] [ 0.232566] pnp 00:03: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[ KERNEL] [ 0.232851] system 00:04: [mem 0xfedc0000-0xfedc7fff] has been reserved
[ KERNEL] [ 0.232852] system 00:04: [mem 0xfeda0000-0xfeda0fff] has been reserved
[ KERNEL] [ 0.232852] system 00:04: [mem 0xfeda1000-0xfeda1fff] has been reserved
[ KERNEL] [ 0.232853] system 00:04: [mem 0xc0000000-0xcfffffff] has been reserved
[ KERNEL] [ 0.232853] system 00:04: [mem 0xfed20000-0xfed7ffff] has been reserved
[ KERNEL] [ 0.232854] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved
[ KERNEL] [ 0.232855] system 00:04: [mem 0xfed45000-0xfed8ffff] could not be reserved
[ KERNEL] [ 0.232855] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[ KERNEL] [ 0.232857] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ KERNEL] [ 0.233176] system 00:05: [io 0x1800-0x18fe] could not be reserved
[ KERNEL] [ 0.233177] system 00:05: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ KERNEL] [ 0.233178] system 00:05: [mem 0xfe04c000-0xfe04ffff] has been reserved
[ KERNEL] [ 0.233178] system 00:05: [mem 0xfe050000-0xfe0affff] has been reserved
[ KERNEL] [ 0.233179] system 00:05: [mem 0xfe0d0000-0xfe0fffff] has been reserved
[ KERNEL] [ 0.233179] system 00:05: [mem 0xfe200000-0xfe7fffff] has been reserved
[ KERNEL] [ 0.233180] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ KERNEL] [ 0.233181] system 00:05: [mem 0xfd000000-0xfd68ffff] has been reserved
[ KERNEL] [ 0.233181] system 00:05: [mem 0xfd6b0000-0xfd6cffff] has been reserved
[ KERNEL] [ 0.233182] system 00:05: [mem 0xfd6f0000-0xfdffffff] has been reserved
[ KERNEL] [ 0.233184] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ KERNEL] [ 0.233361] system 00:06: [io 0x2000-0x20fe] has been reserved
[ KERNEL] [ 0.233363] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ KERNEL] [ 0.233486] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ KERNEL] [ 0.234126] pnp: PnP ACPI: found 8 devices
[ KERNEL] [ 0.234143] thermal_sys: Registered thermal governor 'step_wise'
[ KERNEL] [ 0.238122] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ KERNEL] [ 0.238122] pci 0000:00:15.0: BAR 0: assigned [mem 0x4010000000-0x4010000fff 64bit]
[ KERNEL] [ 0.238122] pci 0000:00:15.1: BAR 0: assigned [mem 0x4010001000-0x4010001fff 64bit]
[ KERNEL] [ 0.238122] pci 0000:00:1f.5: BAR 0: assigned [mem 0x80400000-0x80400fff]
[ KERNEL] [ 0.238122] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ KERNEL] [ 0.238122] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ KERNEL] [ 0.238122] pci 0000:00:1c.0: bridge window [mem 0x84000000-0x840fffff]
[ KERNEL] [ 0.238122] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ KERNEL] [ 0.238122] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ KERNEL] [ 0.238122] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ KERNEL] [ 0.238122] pci_bus 0000:00: resource 7 [mem 0x000e8000-0x000ebfff window]
[ KERNEL] [ 0.238122] pci_bus 0000:00: resource 8 [mem 0x000ec000-0x000effff window]
[ KERNEL] [ 0.238122] pci_bus 0000:00: resource 9 [mem 0x80400000-0xbfffffff window]
[ KERNEL] [ 0.238122] pci_bus 0000:00: resource 10 [mem 0x4000000000-0x7fffffffff window]
[ KERNEL] [ 0.238122] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ KERNEL] [ 0.238122] pci_bus 0000:01: resource 1 [mem 0x84000000-0x840fffff]
[ KERNEL] [ 0.238122] NET: Registered protocol family 2
[ KERNEL] [ 0.238122] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ KERNEL] [ 0.238122] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ KERNEL] [ 0.238122] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ KERNEL] [ 0.238122] TCP: Hash tables configured (established 65536 bind 65536)
[ KERNEL] [ 0.238122] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ KERNEL] [ 0.238122] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ KERNEL] [ 0.238122] NET: Registered protocol family 1
[ KERNEL] [ 0.238122] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ KERNEL] [ 0.239469] PCI: CLS 64 bytes, default 64
[ KERNEL] [ 0.397044] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ KERNEL] [ 0.397046] software IO TLB: mapped [mem 0x60e0c000-0x64e0c000] (64MB)
[ KERNEL] [ 0.397057] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3990bec8342, max_idle_ns: 881590769617 ns
[ KERNEL] [ 0.397070] clocksource: Switched to clocksource tsc
[ KERNEL] [ 0.397199] simple-framebuffer simple-framebuffer.0: framebuffer at 0x4000000000, 0x7e9000 bytes, mapped to 0x000000002e47048c
[ KERNEL] [ 0.397200] simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=1920x1080x32, linelength=7680
[ KERNEL] [ 0.397271] Console: switching to colour frame buffer device 240x67
[ KERNEL] [ 0.402539] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
[ KERNEL] [ 0.402717] Initialise system trusted keyrings
[ KERNEL] [ 0.402740] workingset: timestamp_bits=62 max_order=21 bucket_order=0
[ KERNEL] [ 0.406970] Key type asymmetric registered
[ KERNEL] [ 0.406972] Asymmetric key parser 'x509' registered
[ KERNEL] [ 0.406983] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ KERNEL] [ 0.407342] pcieport 0000:00:1c.0: PME: Signaling with IRQ 122
[ KERNEL] [ 0.407435] intel_idle: does not run on family 6 model 140
[ KERNEL] [ 0.407515] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ KERNEL] [ 0.407532] ACPI: Lid Switch [LID0]
[ KERNEL] [ 0.407557] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ KERNEL] [ 0.407570] ACPI: Power Button [PWRB]
[ KERNEL] [ 0.407593] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ KERNEL] [ 0.407618] ACPI: Power Button [PWRF]
[ KERNEL] [ 0.407837] Monitor-Mwait will be used to enter C-1 state
[ KERNEL] [ 0.407841] Monitor-Mwait will be used to enter C-2 state
[ KERNEL] [ 0.407845] Monitor-Mwait will be used to enter C-3 state
[ KERNEL] [ 0.410776] thermal LNXTHERM:00: registered as thermal_zone0
[ KERNEL] [ 0.410777] ACPI: Thermal Zone [TZ01] (50 C)
[ KERNEL] [ 0.411026] Linux agpgart interface v0.103
[ KERNEL] [ 0.411027] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ KERNEL] [ 0.411027] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[ KERNEL] [ 0.411311] zram: Added device: zram0
[ KERNEL] [ 0.431443] intel-lpss 0000:00:15.0: enabling device (0004 -> 0006)
[ KERNEL] [ 0.431642] intel-lpss 0000:00:15.0: Failed to create debugfs entries
[ KERNEL] [ 0.455450] intel-lpss 0000:00:15.1: enabling device (0004 -> 0006)
[ KERNEL] [ 0.455685] intel-lpss 0000:00:15.1: Failed to create debugfs entries
[ KERNEL] [ 0.460887] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ KERNEL] [ 0.460888] ehci-pci: EHCI PCI platform driver
[ KERNEL] [ 0.460913] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ KERNEL] [ 0.460914] ohci-pci: OHCI PCI platform driver
[ KERNEL] [ 0.460931] uhci_hcd: USB Universal Host Controller Interface driver
[ KERNEL] [ 0.461200] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ KERNEL] [ 0.461206] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ KERNEL] [ 0.462306] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000000009810
[ KERNEL] [ 0.462311] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ KERNEL] [ 0.462389] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ KERNEL] [ 0.462390] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ KERNEL] [ 0.462391] usb usb1: Product: xHCI Host Controller
[ KERNEL] [ 0.462392] usb usb1: Manufacturer: Linux 5.4.72 xhci-hcd
[ KERNEL] [ 0.462393] usb usb1: SerialNumber: 0000:00:14.0
[ KERNEL] [ 0.462490] hub 1-0:1.0: USB hub found
[ KERNEL] [ 0.462510] hub 1-0:1.0: 12 ports detected
[ KERNEL] [ 0.463328] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ KERNEL] [ 0.463330] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ KERNEL] [ 0.463332] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[ KERNEL] [ 0.463361] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ KERNEL] [ 0.463362] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ KERNEL] [ 0.463363] usb usb2: Product: xHCI Host Controller
[ KERNEL] [ 0.463364] usb usb2: Manufacturer: Linux 5.4.72 xhci-hcd
[ KERNEL] [ 0.463364] usb usb2: SerialNumber: 0000:00:14.0
[ KERNEL] [ 0.463435] hub 2-0:1.0: USB hub found
[ KERNEL] [ 0.463448] hub 2-0:1.0: 4 ports detected
[ KERNEL] [ 0.463723] usb: port power management may be unreliable
[ KERNEL] [ 0.463868] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ KERNEL] [ 0.463868] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ KERNEL] [ 0.465276] serio: i8042 KBD port at 0x60,0x64 irq 1
[ KERNEL] [ 0.465303] hv_vmbus: registering driver hyperv_keyboard
[ KERNEL] [ 0.465330] mousedev: PS/2 mouse device common for all mice
[ KERNEL] [ 0.465769] usbcore: registered new interface driver synaptics_usb
[ KERNEL] [ 0.465808] usbcore: registered new interface driver usbtouchscreen
[ KERNEL] [ 0.465841] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ KERNEL] [ 0.465897] rtc_cmos 00:01: RTC can wake from S4
[ KERNEL] [ 0.466509] rtc_cmos 00:01: registered as rtc0
[ KERNEL] [ 0.466527] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram
[ KERNEL] [ 0.466764] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ KERNEL] [ 0.466817] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ KERNEL] [ 0.467401] intel_pstate: Intel P-state driver initializing
[ KERNEL] [ 0.467502] intel_pstate: HWP enabled
[ KERNEL] [ 0.467545] hidraw: raw HID events driver (C) Jiri Kosina
[ KERNEL] [ 0.467616] hv_vmbus: registering driver hid_hyperv
[ KERNEL] [ 0.467741] usbcore: registered new interface driver usbhid
[ KERNEL] [ 0.467742] usbhid: USB HID core driver
[ KERNEL] [ 0.629593] input: ELAN0712:00 04F3:30FD Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-ELAN0712:00/0018:04F3:30FD.0001/input/input5
[ KERNEL] [ 0.629661] input: ELAN0712:00 04F3:30FD Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-ELAN0712:00/0018:04F3:30FD.0001/input/input7
[ KERNEL] [ 0.629711] hid-multitouch 0018:04F3:30FD.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN0712:00 04F3:30FD] on i2c-ELAN0712:00
[ KERNEL] [ 0.631393] NET: Registered protocol family 17
[ KERNEL] [ 0.631632] IPI shorthand broadcast: enabled
[ KERNEL] [ 0.631635] sched_clock: Marking stable (630821113, 477409)->(637661221, -6362699)
[ KERNEL] [ 0.631665] Loading compiled-in X.509 certificates
[ KERNEL] [ 0.632452] rtc_cmos 00:01: setting system clock to 2021-02-03T11:48:04 UTC (1612352884)
[ KERNEL] [ 0.632979] Freeing unused kernel image memory: 3112K
[ KERNEL] [ 0.667444] Write protecting the kernel read-only data: 12288k
[ KERNEL] [ 0.667991] Freeing unused kernel image memory: 2020K
[ KERNEL] [ 0.668057] Freeing unused kernel image memory: 284K
[ KERNEL] [ 0.668058] Run /init as init process
[ KERNEL] [ 0.795414] usb 1-1: new low-speed USB device number 2 using xhci_hcd
[ KERNEL] [ 0.948265] usb 1-1: New USB device found, idVendor=1c4f, idProduct=0034, bcdDevice= 1.10
[ KERNEL] [ 0.948267] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ KERNEL] [ 0.948269] usb 1-1: Product: Usb Mouse
[ KERNEL] [ 0.948270] usb 1-1: Manufacturer: SIGMACHIP
[ KERNEL] [ 0.950901] input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:1C4F:0034.0002/input/input8
[ KERNEL] [ 0.951000] hid-generic 0003:1C4F:0034.0002: input,hidraw1: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:00:14.0-1/input0
[ pfac] [ 0.997319] Run /sbin/initrd.
[ pfac] [ 0.997346] Ok, PID 1112.
[ initrd] [ 0.997847] WTware 6.0.20/UEFI shell.
[ initrd] [ 0.997918] Load font 'ter-c32b.psf', console 120x33.
[ initrd] [ 1.005834] [UEFI] Boot0005.
[ initrd] [ 1.006061] 00000000:0700000001000000900055005300420020004400720069007600650020002800 ..........U.S.B. .D.r.i.v.e. .(.
[ initrd] [ 1.006069] 00000020:5500450046004900290020002D0020004B0069006E006700730074006F006E00 U.E.F.I.). .-. .K.i.n.g.s.t.o.n.
[ initrd] [ 1.006075] 00000040:4400610074006100540072006100760065006C0065007200200032002E003000 D.a.t.a.T.r.a.v.e.l.e.r. .2...0.
[ initrd] [ 1.006081] 00000060:50004D0041005000000002010C00D041030A0000000001010600001403050600 P.M.A.P........A...............
[ initrd] [ 1.006087] 00000080:010004012A0001000000000800000000000000A0E80000000000000000000000 ....*...........................
[ initrd] [ 1.006093] 000000a0:0000000000000000000001017FFF040001044600EF47642DC93BA041AC194D51 .................F..Gd-.;.A.MQ
[ initrd] [ 1.006099] 000000c0:D01B4CE635003000450035003400390043003600390035004100440045004500 .L.5.0.E.5.4.9.C.6.9.5.A.D.E.E.
[ initrd] [ 1.006105] 000000e0:380031004600390032003000420030003500320000007FFF04000000424F 8.1.F.9.2.0.B.0.5.2........BO
[ initrd] [ 1.006111] [UEFI] USB Drive (UEFI) - KingstonDataTraveler 2.0PMAP.
[ initrd] [ 1.006117] [UEFI] Skip type 0x02, subtype 0x01, length 12.
[ initrd] [ 1.006123] [UEFI] Skip type 0x01, subtype 0x01, length 6.
[ initrd] [ 1.006129] [UEFI] Looks like USB boot.
[ initrd] [ 1.006136] USB boot.
[ KERNEL] [ 1.075407] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[ KERNEL] [ 1.226970] usb 1-2: New USB device found, idVendor=0930, idProduct=6545, bcdDevice= 1.00
[ KERNEL] [ 1.226973] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ KERNEL] [ 1.226975] usb 1-2: Product: DataTraveler 2.0
[ KERNEL] [ 1.226976] usb 1-2: Manufacturer: Kingston
[ KERNEL] [ 1.226977] usb 1-2: SerialNumber: 50E549C695ADEE81F920B052
[ KERNEL] [ 1.355384] usb 1-3: new high-speed USB device number 4 using xhci_hcd
[ KERNEL] [ 1.513492] usb 1-3: New USB device found, idVendor=0408, idProduct=5365, bcdDevice= 0.02
[ KERNEL] [ 1.513494] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ KERNEL] [ 1.513495] usb 1-3: Product: HP TrueVision HD Camera
[ KERNEL] [ 1.513496] usb 1-3: Manufacturer: SunplusIT Inc
[ KERNEL] [ 1.639620] usb 1-10: new full-speed USB device number 5 using xhci_hcd
[ KERNEL] [ 1.788465] usb 1-10: New USB device found, idVendor=0bda, idProduct=b00e, bcdDevice= 1.10
[ KERNEL] [ 1.788467] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ KERNEL] [ 1.788468] usb 1-10: Product: Bluetooth Radio
[ KERNEL] [ 1.788469] usb 1-10: Manufacturer: Realtek
[ KERNEL] [ 1.788470] usb 1-10: SerialNumber: 00e04c000001
[ KERNEL] [ 4.390922] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input18

[ initrd] [ 4.651080] Load ISO 9660 and UDF CDROM filesystem drivers.
[ initrd] [ 4.651116] modprobe udf.
[ initrd] [ 4.653170] modprobe isofs.
[ initrd] [ 4.654533] Load VFAT filesystem driver.
[ initrd] [ 4.654561] modprobe fat.
[ initrd] [ 4.656146] modprobe vfat.
[ initrd] [ 4.657227] Load usb storage driver.
[ initrd] [ 4.657249] modprobe scsi_mod.
[ initrd] [ 4.658799] modprobe usb-storage.
[ KERNEL] [ 4.659197] SCSI subsystem initialized
[ initrd] [ 4.659832] modprobe uas.
[ KERNEL] [ 4.660120] usb-storage 1-2:1.0: USB Mass Storage device detected
[ KERNEL] [ 4.660161] scsi host0: usb-storage 1-2:1.0
[ KERNEL] [ 4.660237] usbcore: registered new interface driver usb-storage
[ initrd] [ 4.660529] modprobe sd_mod.
[ KERNEL] [ 4.660959] usbcore: registered new interface driver uas
[ KERNEL] [ 5.681559] scsi 0:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 4
[ KERNEL] [ 5.682259] sd 0:0:0:0: [sda] 15248832 512-byte logical blocks: (7.81 GB/7.27 GiB)
[ KERNEL] [ 5.682391] sd 0:0:0:0: [sda] Write Protect is off
[ KERNEL] [ 5.682393] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
[ KERNEL] [ 5.682545] sd 0:0:0:0: [sda] No Caching mode page found
[ KERNEL] [ 5.682546] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ KERNEL] [ 5.684924] sda: sda1
[ KERNEL] [ 5.685853] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ KERNEL] [ 5.713925] FAT-fs (sda): invalid media value (0xb9)
[ KERNEL] [ 5.713928] FAT-fs (sda): Can't find a valid FAT filesystem
[ initrd] [ 5.720236] Success: /dev/sda1 mounted to /bootmedia.
/--- FILE "/bootmedia/configs/initrd.wtc" -----------------------

\----------------------------------------------------
[ initrd] [ 5.723957] Do not cache package files.
[ initrd] [ 5.723982] WTpassword present: e9d8ed3e6647997572ca00954ce04c51.
[ initrd] [ 5.724014] Unpack /bootmedia/packages/uefi-lib.
[ initrd] [ 6.200343] PCI: C 06:04 8086:a0bf Bridge PCI bridge Intel Corporation.
[ initrd] [ 6.200363] PCI: C 08:80 8086:9a11 Generic system peripheral System peripheral Intel Corporation.
[ initrd] [ 6.200369] PCI: C 0c:80 8086:a0e9 Serial bus controller Intel Corporation.
[ initrd] [ 6.200375] PCI: C 06:01 8086:a082 Bridge ISA bridge Intel Corporation.
[ initrd] [ 6.200381] PCI: C 11:80 8086:9a03 Signal processing controller Signal processing controller Intel Corporation.
[ initrd] [ 6.200387] PCI: C 07:80 8086:a0e0 Communication controller Communication controller Intel Corporation.
[ initrd] [ 6.200393] PCI: C 02:80 10ec:c821 Network controller Network controller Realtek Semiconductor Co., Ltd. RTL8821CE 802.11ac PCIe Wireless Network Adapter.
[ initrd] [ 6.200399] PCI: C 0c:80 8086:a0a4 Serial bus controller Intel Corporation.
[ initrd] [ 6.200405] PCI: C 04:01 8086:a0c8 Multimedia controller Multimedia audio controller Intel Corporation.
[ initrd] [ 6.200411] PCI: C 06 8086:9a04 Bridge Intel Corporation.
[ initrd] [ 6.200417] PCI: C 0c:80 8086:a0e8 Serial bus controller Intel Corporation.
[ initrd] [ 6.200423] PCI: C 08:80 8086:09ab Generic system peripheral System peripheral Intel Corporation.
[ initrd] [ 6.200430] PCI: C 01:04 8086:9a0b Mass storage controller RAID bus controller Intel Corporation Volume Management Device NVMe RAID Controller.
[ initrd] [ 6.200436] PCI: C 05 8086:a0ef Memory controller Intel Corporation.
[ initrd] [ 6.200442] PCI: C 03 8086:9a78 Display controller Intel Corporation.
[ initrd] [ 6.200448] PCI: C 0c:03 8086:a0ed Serial bus controller USB controller Intel Corporation.
[ initrd] [ 6.200454] PCI: C 0c:05 8086:a0a3 Serial bus controller SMBus Intel Corporation.
[ initrd] [ 6.204336] USB: 0bda:b00e Realtek Semiconductor Corp..
[ initrd] [ 6.204345] USB: 0408:5365 Quanta Computer, Inc..
[ initrd] [ 6.204350] USB: 1c4f:0034 SiGma Micro.
[ initrd] [ 6.204356] USB: 0930:6545 Toshiba Corp. Kingston DataTraveler 102/2.0 / HEMA Flash Drive 2 GB / PNY Att.
[ initrd] [ 9.142540] Start Setup.
[ initrd] [ 12.775960] Unpack /bootmedia/packages/uefi-setup.
[ initrd] [ 12.800107] Load IDE bus driver.
[ initrd] [ 12.800118] modprobe libata.
[ KERNEL] [ 12.802086] libata version 3.00 loaded.
[ initrd] [ 12.802086] modprobe ahci.
[ initrd] [ 12.802963] ATA module ahci.ko loaded.
[ initrd] [ 12.803021] modprobe mmc_block.
[ initrd] [ 12.804260] modprobe sdhci-pci.
[ KERNEL] [ 12.805592] sdhci: Secure Digital Host Controller Interface driver
[ KERNEL] [ 12.805592] sdhci: Copyright(c) Pierre Ossman
[ initrd] [ 12.805459] modprobe sdhci-acpi.
[ initrd] [ 12.806118] modprobe rtsx_pci_sdmmc.
[ initrd] [ 12.806952] modprobe nvme_core default_ps_max_latency_us=5500.
[ initrd] [ 12.807940] modprobe nvme.
[ initrd] [ 12.808652] Load HDD drivers.
[ initrd] [ 12.808662] modprobe sd_mod.
[ KERNEL] [ 30.965695] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.

Не вижу в логе NVME контроллер. Может, слишком новая железка, драйвер не подвезли ещё. Какой-нибудь другой линукс на ней запускался?

Винда с этим взлетает
https://downloadcenter.intel.com/ru/dow ... ane-Memory

Для линкса единственное что нашли
https://downloadcenter.intel.com/downlo ... Interface-