Проблема с USB HDD

[nbshum]

Жесткий переносной не определяется не в какую( Отформатировал в FAT32, пробовал разные размеры, не помогает. Флешка (4GB) видится, а этот агрегат нет. Вот лог
[KERNEL] hub 1-0:1.0: state 7 ports 10 chg 0000 evt 0008
[KERNEL] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [2] = 0x00010101 CSC PPS CCS
[KERNEL] hub 1-0:1.0: port 3, status 0101, change 0001, 12 Mb/s
[KERNEL] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x101
[KERNEL] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [2] = 0x00100103 PRSC PPS PES CCS
[KERNEL] usb 1-3: new full speed USB device number 5 using ohci_hcd
[KERNEL] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [2] = 0x00100103 PRSC PPS PES CCS
[KERNEL] usb 1-3: default language 0x0409
[KERNEL] usb 1-3: udev 5, busnum 1, minor = 4
[KERNEL] usb 1-3: New USB device found, idVendor=13fe, idProduct=1f23
[KERNEL] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[KERNEL] usb 1-3: Product: silicon-power
[KERNEL] usb 1-3: Manufacturer:
[KERNEL] usb 1-3: SerialNumber: E6931A001A66
[KERNEL] usb 1-3: usb_probe_device
[KERNEL] usb 1-3: configuration #1 chosen from 1 choice
[KERNEL] usb 1-3: adding 1-3:1.0 (config #1, interface 0)
[KERNEL] usb-storage 1-3:1.0: usb_probe_interface
[KERNEL] usb-storage 1-3:1.0: usb_probe_interface - got id
[KERNEL] scsi4 : usb-storage 1-3:1.0
[KERNEL] drivers/usb/core/inode.c: creating file '005'
[KERNEL] hub 1-0:1.0: state 7 ports 10 chg 0000 evt 0008
[KERNEL] scsi 4:0:0:0: Direct-Access silicon-power PMAP PQ: 0 ANSI: 0 CCS
[KERNEL] scsi: killing requests for dead queue
[KERNEL] scsi: killing requests for dead queue
[KERNEL] sd 4:0:0:0: [sdb] 7827456 512-byte logical blocks: (4.00 GB/3.73 GiB)
[KERNEL] scsi: killing requests for dead queue
[KERNEL] ohci_hcd 0000:00:02.0: urb f5594d40 path 3 ep1in 93120000 cc 9 --> status -121
[KERNEL] sd 4:0:0:0: [sdb] Write Protect is off
[KERNEL] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
[KERNEL] scsi: killing requests for dead queue
[KERNEL] ohci_hcd 0000:00:02.0: urb f5594d40 path 3 ep1in 93120000 cc 9 --> status -121
[KERNEL] sd 4:0:0:0: [sdb] No Caching mode page present
[KERNEL] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[KERNEL] scsi: killing requests for dead queue
[KERNEL] scsi: killing requests for dead queue
[KERNEL] scsi: killing requests for dead queue
[KERNEL] scsi: killing requests for dead queue
[KERNEL] ohci_hcd 0000:00:02.0: urb f55c36c0 path 3 ep1in 93120000 cc 9 --> status -121
[KERNEL] ohci_hcd 0000:00:02.0: urb f55c36c0 path 3 ep1in 93120000 cc 9 --> status -121
[KERNEL] sd 4:0:0:0: [sdb] No Caching mode page present
[KERNEL] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[KERNEL] sdb: sdb1
[hotplug] R/w FAT mount ("/dev/sdb", "/mnt/usb-rdp/5",..) failed, errno 22.
[KERNEL] FAT-fs (sdb): invalid media value (0xb9)
[KERNEL] FAT-fs (sdb): Can't find a valid FAT filesystem
[hotplug] R/o NTFS mount ("/dev/sdb", "/mnt/usb-rdp/5",..) failed, errno 22.
[KERNEL] NTFS-fs warning (device sdb): is_boot_sector_ntfs(): Invalid boot sector checksum.
[KERNEL] NTFS-fs error (device sdb): read_ntfs_boot_sector(): Primary boot sector is invalid.
[KERNEL] NTFS-fs error (device sdb): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover.
[KERNEL] NTFS-fs error (device sdb): ntfs_fill_super(): Not an NTFS volume.
[KERNEL] ohci_hcd 0000:00:02.0: urb f5594bc0 path 3 ep1in 93120000 cc 9 --> status -121
[KERNEL] ohci_hcd 0000:00:02.0: urb f5594bc0 path 3 ep1in 92120000 cc 9 --> status -121
[KERNEL] sd 4:0:0:0: [sdb] No Caching mode page present
[KERNEL] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[KERNEL] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[hotplug] R/o FAT mount ("/dev/sdb", "/mnt/usb-rdp/5",..) failed, errno 22.
[KERNEL] FAT-fs (sdb): invalid media value (0xb9)
[KERNEL] FAT-fs (sdb): Can't find a valid FAT filesystem
[hotplug] Success: USB2p1 mounted VFAT r/w.
[KERNEL] hub 1-0:1.0: state 7 ports 10 chg 0000 evt 0008
[KERNEL] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [2] = 0x00030100 PESC CSC PPS
[KERNEL] hub 1-0:1.0: port 3, status 0100, change 0003, 12 Mb/s
[KERNEL] usb 1-3: USB disconnect, device number 5
[KERNEL] usb 1-3: unregistering device
[KERNEL] usb 1-3: unregistering interface 1-3:1.0
[hotplug] /dev/sdb1 unmounted from /mnt/usb-rdp/6.
[KERNEL] scsi: killing requests for dead queue
[KERNEL] usb 1-3: usb_disable_device nuking all URBs
[KERNEL] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x100

[nbshum]

Спасибо, вопрос решился)