Лог:
WTware 4.9.28 supervisor.
WTC listener active.
WTC broadcast listener active.
HTTPd listener active.
[KERNEL] Linux version 2.6.39 (root@compiler) (gcc version 4.5.2 (Buildroot 2011.05-git) ) #1 PREEMPT Sat May 7 19:18:36 UTC 2011
[KERNEL] KERNEL supported cpus:
[KERNEL] Intel GenuineIntel
[KERNEL] AMD AuthenticAMD
[KERNEL] NSC Geode by NSC
[KERNEL] Cyrix CyrixInstead
[KERNEL] Centaur CentaurHauls
[KERNEL] Transmeta GenuineTMx86
[KERNEL] Transmeta TransmetaCPU
[KERNEL] UMC UMC UMC UMC
[KERNEL] BIOS-provided physical RAM map:
[KERNEL] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[KERNEL] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[KERNEL] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[KERNEL] BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
[KERNEL] BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
[KERNEL] BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
[KERNEL] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[KERNEL] Notice: NX (Execute Disable) protection missing in CPU!
[KERNEL] DMI 2.2 present.
[KERNEL] DMI: /Springdale, BIOS 6.00 PG 04/28/2005
[KERNEL] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[KERNEL] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[KERNEL] last_pfn = 0xfff0 max_arch_pfn = 0x100000
[KERNEL] MTRR default type: uncachable
[KERNEL] MTRR fixed ranges enabled:
[KERNEL] 00000-9FFFF write-back
[KERNEL] A0000-EFFFF uncachable
[KERNEL] F0000-FFFFF write-through
[KERNEL] MTRR variable ranges enabled:
[KERNEL] 0 base 000000000 mask FF0000000 write-back
[KERNEL] 1 disabled
[KERNEL] 2 disabled
[KERNEL] 3 disabled
[KERNEL] 4 disabled
[KERNEL] 5 disabled
[KERNEL] 6 disabled
[KERNEL] 7 disabled
[KERNEL] initial memory mapped : 0 - 00800000
[KERNEL] Base memory trampoline at [c009c000] 9c000 size 12288
[KERNEL] init_memory_mapping: 0000000000000000-000000000fff0000
[KERNEL] 0000000000 - 0000400000 page 4k
[KERNEL] 0000400000 - 000fc00000 page 2M
[KERNEL] 000fc00000 - 000fff0000 page 4k
[KERNEL] kernel direct mapping tables up to fff0000 @ 7fb000-800000
[KERNEL] early_memtest: # of tests: 1
[KERNEL] 0000010000 - 000009c000 pattern 0000000000000000
[KERNEL] 000009f000 - 000009f400 pattern 0000000000000000
[KERNEL] 000040d07a - 00007fb000 pattern 0000000000000000
[KERNEL] 00007fc000 - 000fc00000 pattern 0000000000000000
[KERNEL] 000ffcf000 - 000fff0000 pattern 0000000000000000
[KERNEL] RAMDISK: 0fc00000 - 0ffcf000
[KERNEL] ACPI: RSDP 000f6ca0 00014 (v00 IntelR)
[KERNEL] ACPI: RSDT 0fff3000 0002C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
[KERNEL] ACPI: FACP 0fff3040 00074 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
[KERNEL] ACPI: DSDT 0fff30c0 03B67 (v01 INTELR AWRDACPI 00001000 MSFT 0100000E)
[KERNEL] ACPI: FACS 0fff0000 00040
[KERNEL] ACPI: APIC 0fff6c40 00068 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
[KERNEL] ACPI: Local APIC address 0xfee00000
[KERNEL] 255MB LOWMEM available.
[KERNEL] mapped low ram: 0 - 0fff0000
[KERNEL] low ram: 0 - 0fff0000
[KERNEL] Zone PFN ranges:
[KERNEL] DMA 0x00000010 -> 0x00001000
[KERNEL] Normal 0x00001000 -> 0x0000fff0
[KERNEL] Movable zone start PFN for each node
[KERNEL] early_node_map[2] active PFN ranges
[KERNEL] 0: 0x00000010 -> 0x0000009f
[KERNEL] 0: 0x00000100 -> 0x0000fff0
[KERNEL] On node 0 totalpages: 65407
[KERNEL] free_area_init_node: node 0, pgdat c039f0e0, node_mem_map cfa00200
[KERNEL] DMA zone: 32 pages used for memmap
[KERNEL] DMA zone: 0 pages reserved
[KERNEL] DMA zone: 3951 pages, LIFO batch:0
[KERNEL] Normal zone: 480 pages used for memmap
[KERNEL] Normal zone: 60944 pages, LIFO batch:15
[KERNEL] Using APIC driver default
[KERNEL] ACPI: PM-Timer IO Port: 0x408
[KERNEL] ACPI: Local APIC address 0xfee00000
[KERNEL] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[KERNEL] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[KERNEL] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[KERNEL] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[KERNEL] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[KERNEL] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[KERNEL] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[KERNEL] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[KERNEL] ACPI: IRQ0 used by override.
[KERNEL] ACPI: IRQ2 used by override.
[KERNEL] ACPI: IRQ9 used by override.
[KERNEL] Using ACPI (MADT) for SMP configuration information
[KERNEL] nr_irqs_gsi: 40
[KERNEL] Allocating PCI resources starting at 10000000 (gap: 10000000:eec00000)
[KERNEL] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[KERNEL] pcpu-alloc: [0] 0
[KERNEL] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64895
[KERNEL] Kernel command line: root=/dev/ram0 ramdisk_blocksize=4096 ramdisk_size=8192 memtest=1 quiet initrd=packages/initrd BOOT_IMAGE=packages/kernel
[KERNEL] PID hash table entries: 1024 (order: 0, 4096 bytes)
[KERNEL] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[KERNEL] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[KERNEL] Initializing CPU#0
[KERNEL] Memory: 252300k/262080k available (2123k kernel code, 9328k reserved, 568k data, 296k init, 0k highmem)
[KERNEL] virtual kernel memory layout:
[KERNEL] fixmap : 0xfffa2000 - 0xfffff000 ( 372 kB)
[KERNEL] vmalloc : 0xd07f0000 - 0xfffa0000 ( 759 MB)
[KERNEL] lowmem : 0xc0000000 - 0xcfff0000 ( 255 MB)
[KERNEL] .init : 0xc03a2000 - 0xc03ec000 ( 296 kB)
[KERNEL] .data : 0xc0312da3 - 0xc03a1140 ( 568 kB)
[KERNEL] .text : 0xc0100000 - 0xc0312da3 (2123 kB)
[KERNEL] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[KERNEL] NR_IRQS:288
[KERNEL] CPU 0 irqstacks, hard=cf408000 soft=cf40a000
[KERNEL] Console: colour VGA+ 80x25
[KERNEL] console [tty0] enabled
[KERNEL] Fast TSC calibration using PIT
[KERNEL] Detected 1999.798 MHz processor.
[KERNEL] Calibrating delay loop (skipped), value calculated using timer frequency.. 3999.59 BogoMIPS (lpj=1999798)
[KERNEL] pid_max: default: 32768 minimum: 301
[KERNEL] Mount-cache hash table entries: 512
[KERNEL] CPU: Intel(R) Celeron(R) CPU 2.00GHz stepping 09
[KERNEL] ACPI: Core revision 20110316
[KERNEL] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[KERNEL] ... version: 0
[KERNEL] ... bit width: 40
[KERNEL] ... generic registers: 18
[KERNEL] ... value mask: 000000ffffffffff
[KERNEL] ... max period: 0000007fffffffff
[KERNEL] ... fixed-purpose events: 0
[KERNEL] ... event mask: 000000000003ffff
[KERNEL] Enabling APIC mode: Flat. Using 1 I/O APICs
[KERNEL] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[KERNEL] NET: Registered protocol family 16
[KERNEL] ACPI: bus type pci registered
[KERNEL] PCI: PCI BIOS revision 2.10 entry at 0xfb680, last bus=2
[KERNEL] PCI: Using configuration type 1 for base access
[KERNEL] bio: create slab <bio-0> at 0
[KERNEL] ACPI: EC: Look up EC in DSDT
[KERNEL] ACPI: Interpreter enabled
[KERNEL] ACPI: (supports S0 S1 S5)
[KERNEL] ACPI: Using IOAPIC for interrupt routing
[KERNEL] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[KERNEL] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[KERNEL] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[KERNEL] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[KERNEL] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[KERNEL] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[KERNEL] pci_root PNP0A03:00: host bridge window [mem 0x10000000-0xfebfffff] (ignored)
[KERNEL] pci 0000:00:00.0: [8086:2570] type 0 class 0x000600
[KERNEL] pci 0000:00:00.0: Enabling MCH 'Overflow' Device
[KERNEL] pci 0000:00:00.0: reg 10: [mem 0xe0000000-0xe7ffffff pref]
[KERNEL] pci 0000:00:01.0: [8086:2571] type 1 class 0x000604
[KERNEL] pci 0000:00:06.0: [8086:2576] type 0 class 0x000880
[KERNEL] pci 0000:00:06.0: reg 10: [mem 0xfecf0000-0xfecf0fff]
[KERNEL] pci 0000:00:1d.0: [8086:24d2] type 0 class 0x000c03
[KERNEL] pci 0000:00:1d.0: reg 20: [io 0xcc00-0xcc1f]
[KERNEL] pci 0000:00:1d.1: [8086:24d4] type 0 class 0x000c03
[KERNEL] pci 0000:00:1d.1: reg 20: [io 0xc000-0xc01f]
[KERNEL] pci 0000:00:1d.2: [8086:24d7] type 0 class 0x000c03
[KERNEL] pci 0000:00:1d.2: reg 20: [io 0xc400-0xc41f]
[KERNEL] pci 0000:00:1d.3: [8086:24de] type 0 class 0x000c03
[KERNEL] pci 0000:00:1d.3: reg 20: [io 0xc800-0xc81f]
[KERNEL] pci 0000:00:1d.7: [8086:24dd] type 0 class 0x000c03
[KERNEL] pci 0000:00:1d.7: reg 10: [mem 0xf8200000-0xf82003ff]
[KERNEL] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[KERNEL] pci 0000:00:1d.7: PME# disabled
[KERNEL] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[KERNEL] pci 0000:00:1f.0: [8086:24d0] type 0 class 0x000601
[KERNEL] pci 0000:00:1f.1: [8086:24db] type 0 class 0x000101
[KERNEL] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[KERNEL] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[KERNEL] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[KERNEL] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[KERNEL] pci 0000:00:1f.1: reg 20: [io 0xf000-0xf00f]
[KERNEL] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
[KERNEL] pci 0000:00:1f.3: [8086:24d3] type 0 class 0x000c05
[KERNEL] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
[KERNEL] pci 0000:00:1f.5: [8086:24d5] type 0 class 0x000401
[KERNEL] pci 0000:00:1f.5: reg 10: [io 0xd400-0xd4ff]
[KERNEL] pci 0000:00:1f.5: reg 14: [io 0xd800-0xd83f]
[KERNEL] pci 0000:00:1f.5: reg 18: [mem 0xf8201000-0xf82011ff]
[KERNEL] pci 0000:00:1f.5: reg 1c: [mem 0xf8202000-0xf82020ff]
[KERNEL] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[KERNEL] pci 0000:00:1f.5: PME# disabled
[KERNEL] pci 0000:01:00.0: [1002:5960] type 0 class 0x000300
[KERNEL] pci 0000:01:00.0: reg 10: [mem 0xe8000000-0xefffffff pref]
[KERNEL] pci 0000:01:00.0: reg 14: [io 0xa000-0xa0ff]
[KERNEL] pci 0000:01:00.0: reg 18: [mem 0xf8030000-0xf803ffff]
[KERNEL] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[KERNEL] pci 0000:01:00.0: supports D1 D2
[KERNEL] pci 0000:01:00.1: [1002:5940] type 0 class 0x000380
[KERNEL] pci 0000:01:00.1: reg 10: [mem 0xf0000000-0xf7ffffff pref]
[KERNEL] pci 0000:01:00.1: reg 14: [mem 0xf8020000-0xf802ffff]
[KERNEL] pci 0000:01:00.1: supports D1 D2
[KERNEL] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[KERNEL] pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
[KERNEL] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xf80fffff]
[KERNEL] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf7ffffff pref]
[KERNEL] pci 0000:02:05.0: [10ec:8139] type 0 class 0x000200
[KERNEL] pci 0000:02:05.0: reg 10: [io 0xb000-0xb0ff]
[KERNEL] pci 0000:02:05.0: reg 14: [mem 0xf8100000-0xf81000ff]
[KERNEL] pci 0000:02:05.0: supports D1 D2
[KERNEL] pci 0000:02:05.0: PME# supported from D1 D2 D3hot D3cold
[KERNEL] pci 0000:02:05.0: PME# disabled
[KERNEL] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode)
[KERNEL] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff]
[KERNEL] pci 0000:00:1e.0: bridge window [mem 0xf8100000-0xf81fffff]
[KERNEL] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[KERNEL] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[KERNEL] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[KERNEL] pci_bus 0000:00: on NUMA node 0
[KERNEL] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[KERNEL] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[KERNEL] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[KERNEL] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[KERNEL] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[KERNEL] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[KERNEL] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[KERNEL] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[KERNEL] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[KERNEL] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[KERNEL] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[KERNEL] vgaarb: loaded
[KERNEL] usbcore: registered new interface driver usbfs
[KERNEL] usbcore: registered new interface driver hub
[KERNEL] usbcore: registered new device driver usb
[KERNEL] PCI: Using ACPI for IRQ routing
[KERNEL] PCI: pci_cache_line_size set to 64 bytes
[KERNEL] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[KERNEL] reserve RAM buffer: 000000000fff0000 - 000000000fffffff
[KERNEL] pnp: PnP ACPI init
[KERNEL] ACPI: bus type pnp registered
[KERNEL] pnp 00:00: [bus 00-ff]
[KERNEL] pnp 00:00: [io 0x0cf8-0x0cff]
[KERNEL] pnp 00:00: [io 0x0000-0x0cf7 window]
[KERNEL] pnp 00:00: [io 0x0d00-0xffff window]
[KERNEL] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[KERNEL] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[KERNEL] pnp 00:00: [mem 0x10000000-0xfebfffff window]
[KERNEL] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[KERNEL] pnp 00:01: [io 0x0010-0x001f]
[KERNEL] pnp 00:01: [io 0x0022-0x003f]
[KERNEL] pnp 00:01: [io 0x0044-0x005f]
[KERNEL] pnp 00:01: [io 0x0062-0x0063]
[KERNEL] pnp 00:01: [io 0x0065-0x006f]
[KERNEL] pnp 00:01: [io 0x0074-0x007f]
[KERNEL] pnp 00:01: [io 0x0091-0x0093]
[KERNEL] pnp 00:01: [io 0x00a2-0x00bf]
[KERNEL] pnp 00:01: [io 0x00e0-0x00ef]
[KERNEL] pnp 00:01: [io 0x04d0-0x04d1]
[KERNEL] pnp 00:01: [io 0x0290-0x029f]
[KERNEL] pnp 00:01: [io 0x0800-0x0805]
[KERNEL] system 00:01: [io 0x04d0-0x04d1] has been reserved
[KERNEL] system 00:01: [io 0x0290-0x029f] has been reserved
[KERNEL] system 00:01: [io 0x0800-0x0805] has been reserved
[KERNEL] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[KERNEL] pnp 00:02: [dma 4]
[KERNEL] pnp 00:02: [io 0x0000-0x000f]
[KERNEL] pnp 00:02: [io 0x0080-0x0090]
[KERNEL] pnp 00:02: [io 0x0094-0x009f]
[KERNEL] pnp 00:02: [io 0x00c0-0x00df]
[KERNEL] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[KERNEL] pnp 00:03: [io 0x0070-0x0073]
[KERNEL] pnp 00:03: [irq 8]
[KERNEL] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[KERNEL] pnp 00:04: [io 0x0061]
[KERNEL] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[KERNEL] pnp 00:05: [io 0x00f0-0x00ff]
[KERNEL] pnp 00:05: [irq 13]
[KERNEL] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[KERNEL] pnp 00:06: [io 0x03f0-0x03f5]
[KERNEL] pnp 00:06: [io 0x03f7]
[KERNEL] pnp 00:06: [irq 6]
[KERNEL] pnp 00:06: [dma 2]
[KERNEL] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
[KERNEL] pnp 00:07: [io 0x03f8-0x03ff]
[KERNEL] pnp 00:07: [irq 4]
[KERNEL] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[KERNEL] pnp 00:08: [io 0x02f8-0x02ff]
[KERNEL] pnp 00:08: [irq 3]
[KERNEL] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[KERNEL] pnp 00:09: [io 0x0378-0x037f]
[KERNEL] pnp 00:09: [irq 7]
[KERNEL] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
[KERNEL] pnp 00:0a: [irq 12]
[KERNEL] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f13 (active)
[KERNEL] pnp 00:0b: [io 0x0060]
[KERNEL] pnp 00:0b: [io 0x0064]
[KERNEL] pnp 00:0b: [irq 1]
[KERNEL] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[KERNEL] pnp 00:0c: [io 0x0400-0x04bf]
[KERNEL] system 00:0c: [io 0x0400-0x04bf] has been reserved
[KERNEL] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[KERNEL] pnp 00:0d: [mem 0xffb80000-0xffbfffff]
[KERNEL] pnp 00:0d: Plug and Play ACPI device, IDs INT0800 (active)
[KERNEL] pnp 00:0e: [mem 0x000d5000-0x000d7fff]
[KERNEL] pnp 00:0e: [mem 0x000f0000-0x000f7fff]
[KERNEL] pnp 00:0e: [mem 0x000f8000-0x000fbfff]
[KERNEL] pnp 00:0e: [mem 0x000fc000-0x000fffff]
[KERNEL] pnp 00:0e: [mem 0x0fff0000-0x0fffffff]
[KERNEL] pnp 00:0e: [mem 0x00000000-0x0009ffff]
[KERNEL] pnp 00:0e: [mem 0x00100000-0x0ffeffff]
[KERNEL] pnp 00:0e: [mem 0xfec00000-0xfec00fff]
[KERNEL] pnp 00:0e: [mem 0xfec01000-0xfed8ffff]
[KERNEL] pnp 00:0e: [mem 0xfee00000-0xfee00fff]
[KERNEL] pnp 00:0e: [mem 0xffb00000-0xffb7ffff]
[KERNEL] pnp 00:0e: [mem 0xfff00000-0xffffffff]
[KERNEL] pnp 00:0e: [mem 0x000e0000-0x000effff]
[KERNEL] system 00:0e: [mem 0x000d5000-0x000d7fff] has been reserved
[KERNEL] system 00:0e: [mem 0x000f0000-0x000f7fff] could not be reserved
[KERNEL] system 00:0e: [mem 0x000f8000-0x000fbfff] could not be reserved
[KERNEL] system 00:0e: [mem 0x000fc000-0x000fffff] could not be reserved
[KERNEL] system 00:0e: [mem 0x0fff0000-0x0fffffff] could not be reserved
[KERNEL] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
[KERNEL] system 00:0e: [mem 0x00100000-0x0ffeffff] could not be reserved
[KERNEL] system 00:0e: [mem 0xfec00000-0xfec00fff] could not be reserved
[KERNEL] system 00:0e: [mem 0xfec01000-0xfed8ffff] could not be reserved
[KERNEL] system 00:0e: [mem 0xfee00000-0xfee00fff] has been reserved
[KERNEL] system 00:0e: [mem 0xffb00000-0xffb7ffff] has been reserved
[KERNEL] system 00:0e: [mem 0xfff00000-0xffffffff] has been reserved
[KERNEL] system 00:0e: [mem 0x000e0000-0x000effff] has been reserved
[KERNEL] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[KERNEL] pnp: PnP ACPI: found 15 devices
[KERNEL] ACPI: ACPI bus type pnp unregistered
[KERNEL] Switching to clocksource acpi_pm
[KERNEL] pci 0000:00:1f.1: BAR 5: assigned [mem 0x10000000-0x100003ff]
[KERNEL] pci 0000:00:1f.1: BAR 5: set to [mem 0x10000000-0x100003ff] (PCI address [0x10000000-0x100003ff])
[KERNEL] pci 0000:01:00.0: BAR 6: assigned [mem 0xf8000000-0xf801ffff pref]
[KERNEL] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[KERNEL] pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
[KERNEL] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xf80fffff]
[KERNEL] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf7ffffff pref]
[KERNEL] pci 0000:00:1e.0: PCI bridge to [bus 02-02]
[KERNEL] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff]
[KERNEL] pci 0000:00:1e.0: bridge window [mem 0xf8100000-0xf81fffff]
[KERNEL] pci 0000:00:1e.0: bridge window [mem pref disabled]
[KERNEL] pci 0000:00:1e.0: setting latency timer to 64
[KERNEL] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[KERNEL] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[KERNEL] pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
[KERNEL] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xf80fffff]
[KERNEL] pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf7ffffff pref]
[KERNEL] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
[KERNEL] pci_bus 0000:02: resource 1 [mem 0xf8100000-0xf81fffff]
[KERNEL] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
[KERNEL] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[KERNEL] NET: Registered protocol family 2
[KERNEL] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[KERNEL] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[KERNEL] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[KERNEL] TCP: Hash tables configured (established 8192 bind 8192)
[KERNEL] TCP reno registered
[KERNEL] UDP hash table entries: 256 (order: 0, 4096 bytes)
[KERNEL] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[KERNEL] NET: Registered protocol family 1
[KERNEL] pci 0000:01:00.0: Boot video device
[KERNEL] PCI: CLS 32 bytes, default 64
[KERNEL] Freeing initrd memory: 3900k freed
[KERNEL] ROMFS MTD (C) 2007 Red Hat, Inc.
[KERNEL] msgmni has been set to 500
[KERNEL] io scheduler noop registered
[KERNEL] io scheduler cfq registered (default)
[KERNEL] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[KERNEL] ACPI: Power Button [PWRB]
[KERNEL] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[KERNEL] ACPI: Power Button [PWRF]
[KERNEL] ACPI: acpi_idle registered with cpuidle
[KERNEL] brd: module loaded
[KERNEL] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[KERNEL] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[KERNEL] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[KERNEL] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[KERNEL] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[KERNEL] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[KERNEL] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8200000
[KERNEL] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[KERNEL] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[KERNEL] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[KERNEL] usb usb1: Product: EHCI Host Controller
[KERNEL] usb usb1: Manufacturer: Linux 2.6.39 ehci_hcd
[KERNEL] usb usb1: SerialNumber: 0000:00:1d.7
[KERNEL] hub 1-0:1.0: USB hub found
[KERNEL] hub 1-0:1.0: 8 ports detected
[KERNEL] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[KERNEL] uhci_hcd: USB Universal Host Controller Interface driver
[KERNEL] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[KERNEL] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[KERNEL] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[KERNEL] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[KERNEL] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000cc00
[KERNEL] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[KERNEL] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[KERNEL] usb usb2: Product: UHCI Host Controller
[KERNEL] usb usb2: Manufacturer: Linux 2.6.39 uhci_hcd
[KERNEL] usb usb2: SerialNumber: 0000:00:1d.0
[KERNEL] hub 2-0:1.0: USB hub found
[KERNEL] hub 2-0:1.0: 2 ports detected
[KERNEL] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[KERNEL] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[KERNEL] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[KERNEL] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[KERNEL] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c000
[KERNEL] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[KERNEL] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[KERNEL] usb usb3: Product: UHCI Host Controller
[KERNEL] usb usb3: Manufacturer: Linux 2.6.39 uhci_hcd
[KERNEL] usb usb3: SerialNumber: 0000:00:1d.1
[KERNEL] hub 3-0:1.0: USB hub found
[KERNEL] hub 3-0:1.0: 2 ports detected
[KERNEL] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[KERNEL] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[KERNEL] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[KERNEL] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[KERNEL] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c400
[KERNEL] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[KERNEL] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[KERNEL] usb usb4: Product: UHCI Host Controller
[KERNEL] usb usb4: Manufacturer: Linux 2.6.39 uhci_hcd
[KERNEL] usb usb4: SerialNumber: 0000:00:1d.2
[KERNEL] hub 4-0:1.0: USB hub found
[KERNEL] hub 4-0:1.0: 2 ports detected
[KERNEL] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[KERNEL] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[KERNEL] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[KERNEL] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[KERNEL] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000c800
[KERNEL] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[KERNEL] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[KERNEL] usb usb5: Product: UHCI Host Controller
[KERNEL] usb usb5: Manufacturer: Linux 2.6.39 uhci_hcd
[KERNEL] usb usb5: SerialNumber: 0000:00:1d.3
[KERNEL] hub 5-0:1.0: USB hub found
[KERNEL] hub 5-0:1.0: 2 ports detected
[KERNEL] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[KERNEL] serio: i8042 KBD port at 0x60,0x64 irq 1
[KERNEL] serio: i8042 AUX port at 0x60,0x64 irq 12
[KERNEL] mousedev: PS/2 mouse device common for all mice
[KERNEL] input: PC Speaker as /devices/platform/pcspkr/input/input2
[KERNEL] cpuidle: using governor ladder
[KERNEL] usbcore: registered new interface driver usbhid
[KERNEL] usbhid: USB HID core driver
[KERNEL] TCP cubic registered
[KERNEL] NET: Registered protocol family 17
[KERNEL] Using IPI Shortcut mode
[KERNEL] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[KERNEL] usb 1-1: new high speed USB device number 2 using ehci_hcd
[KERNEL] usb 1-1: New USB device found, idVendor=13fe, idProduct=1f23
[KERNEL] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[KERNEL] usb 1-1: Product: -power
[KERNEL] usb 1-1: Manufacturer: silicon
[KERNEL] usb 1-1: SerialNumber: E69112001951
[KERNEL] Refined TSC clocksource calibration: 2000.000 MHz.
[KERNEL] Switching to clocksource tsc
[KERNEL] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[KERNEL] RAMDISK: lzo image found at block 0
[KERNEL] VFS: Mounted root (romfs filesystem) readonly on device 1:0.
[KERNEL] Freeing unused kernel memory: 296k freed
[pfac] Ok, PID 394.
[initrd] WTware shell v.4.9.28
[initrd] PCIID: 8086:2570 class 00 subclass 00.
[initrd] PCIID: 8086:2571 class 04 subclass 00.
[initrd] PCIID: 8086:2576 class 80 subclass 00.
[initrd] PCIID: 8086:24d2 class 03 subclass 00.
[initrd] PCIID: 8086:24d4 class 03 subclass 00.
[initrd] PCIID: 8086:24d7 class 03 subclass 00.
[initrd] PCIID: 8086:24de class 03 subclass 00.
[initrd] PCIID: 8086:24dd class 03 subclass 20.
[initrd] PCIID: 8086:244e class 04 subclass 00.
[initrd] WARNING: multiple devices same type: 8086:244e and 8086:2571. One of them will not work.
[initrd] PCIID: 8086:24d0 class 01 subclass 00.
[initrd] PCIID: 8086:24db class 01 subclass 8a.
[initrd] PCIID: 8086:24d3 class 05 subclass 00.
[initrd] PCIID: 8086:24d5 class 01 subclass 00.
[initrd] PCIID: 1002:5960 class 00 subclass 00.
[initrd] PCIID: 1002:5940 class 80 subclass 00.
[initrd] PCIID: 10ec:8139 class 00 subclass 00.
[initrd] PCIID, VGA: 8086:24d2.
[initrd] PCIID, second VGA: 8086:24dd.
[initrd] PCIID, sound: 8086:2571.
/--- FILE "/proc/bus/usb/devices" -----------------------
| T: Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
| B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
| D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
| P: Vendor=1d6b ProdID=0001 Rev= 2.06
| S: Manufacturer=Linux 2.6.39 uhci_hcd
| S: Product=UHCI Host Controller
| S: SerialNumber=0000:00:1d.3
| C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
| I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
| E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
| T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
| B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
| D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
| P: Vendor=1d6b ProdID=0001 Rev= 2.06
| S: Manufacturer=Linux 2.6.39 uhci_hcd
| S: Product=UHCI Host Controller
| S: SerialNumber=0000:00:1d.2
| C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
| I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
| E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
| T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
| B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
| D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
| P: Vendor=1d6b ProdID=0001 Rev= 2.06
| S: Manufacturer=Linux 2.6.39 uhci_hcd
| S: Product=UHCI Host Controller
| S: SerialNumber=0000:00:1d.1
| C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
| I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
| E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
| T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
| B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
| D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
| P: Vendor=1d6b ProdID=0001 Rev= 2.06
| S: Manufacturer=Linux 2.6.39 uhci_hcd
| S: Product=UHCI Host Controller
| S: SerialNumber=0000:00:1d.0
| C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
| I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
| E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
| T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8
| B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
| D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
| P: Vendor=1d6b ProdID=0002 Rev= 2.06
| S: Manufacturer=Linux 2.6.39 ehci_hcd
| S: Product=EHCI Host Controller
| S: SerialNumber=0000:00:1d.7
| C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
| I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
| E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
| T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
| D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
| P: Vendor=13fe ProdID=1f23 Rev= 1.10
| S: Manufacturer=silicon
| S: Product=-power
| S: SerialNumber=E69112001951
| C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=200mA
| I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
| E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
| E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
\----------------------------------------------------
[initrd] Loading ethernet drivers.
[initrd] +--- Executing "/sbin/modprobe 8139too"
[KERNEL] 8139too: 8139too Fast Ethernet driver 0.9.28
[KERNEL] 8139too 0000:02:05.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[KERNEL] 8139too 0000:02:05.0: eth0: RealTek RTL8139 at 0xd0816000, 00:01:6c:c4:45:8b, IRQ 23
[initrd] +- Errorlevel: 0, output:
[initrd] +------------------------
[initrd] NIC module 8139too.ko loaded.
[initrd] +--- Executing "/sbin/modprobe 8139cp"
[KERNEL] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[initrd] +- Errorlevel: 0, output:
[initrd] +------------------------
[initrd] NIC module 8139cp.ko loaded.
[KERNEL] 8139too 0000:02:05.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[initrd] dhcp: 345 bytes from 10.0.0.1.
[initrd] 00000000:0000014500000000001100000a000001ffffffff004300440145000002010600
[initrd] 00000020:67458b6b00000000000000000a00000b0a0000010000000000016cc4458b0000
[initrd] 00000040:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 00000060:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 00000080:0000000000000000342e392e32385c7774776172652e70786500000000000000
[initrd] 000000a0:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 000000c0:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 000000e0:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 00000100:0000000000000000638253633501020104ffffff003a04000546003b0400093a
[initrd] 00000120:803304000a8c0036040a00000103040a0000010604c0a80101420931302e302e
[initrd] 00000140:302e31004312342e392e32385c7774776172652e70786500ff
[initrd] dhcp: 345 bytes from 10.0.0.1.
[initrd] 00000000:0000014500000000001100000a000001ffffffff004300440145000002010600
[initrd] 00000020:67458b6b00000000000000000a00000b0a0000010000000000016cc4458b0000
[initrd] 00000040:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 00000060:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 00000080:0000000000000000342e392e32385c7774776172652e70786500000000000000
[initrd] 000000a0:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 000000c0:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 000000e0:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 00000100:0000000000000000638253633501053a04000546003b0400093a803304000a8c
[initrd] 00000120:0036040a0000010104ffffff0003040a0000010604c0a80101420931302e302e
[initrd] 00000140:302e31004312342e392e32385c7774776172652e70786500ff
[initrd] dhcp: server address 10.0.0.1.
[initrd] dhcp: 10.0.0.11/255.255.255.0.
[initrd] dhcp: default gateway 10.0.0.1.
[initrd] dhcp: DNS 192.168.1.1.
[initrd] dhcp: TFTP 10.0.0.1.
[initrd] dhcp: boot file (067) 4.9.28\wtware.pxe.
[initrd] TFTP binary "4.9.28\", configs prefix "", using "\" slash.
Send broadcast WTCU discover.
[initrd] WTware TFTP v.4.9.28.
[initrd] tftp: download file Everyone\list.wtc from 10.0.0.1.
/--- FILE "/tmp/list.wtc" -----------------------
| #
| # Ñïèñîê ïîäêëþ÷àåìûõ ôàéëîâ.
| #
| # Ýòîò îòäåëüíûé ìåõàíèçì íàñòðîéêè òåðìèíàëîâ ïðåäíàçíà÷åí òîëüêî
| # äëÿ ðó÷íîãî êîíôèãóðèðîâàíèÿ òåðìèíàëîâ. Ãðàôè÷åñêèé êîíôèãóðàòîð
| # íå ÷èòàåò list.wtc, íå ÷èòàåò è íå ïîçâîëÿåò ðåäàêòèðîâàòü ôàéëû
| # èç êàòàëîãà ListIncludes. Ïîýòîìó íåëüçÿ ïûòàòüñÿ íàñòðàèâàòü îäèí
| # è òîò æå òåðìèíàë è êîíôèãóðàòîðîì, è ÷åðåç list.wtc.
| #
| # Ôîðìàò ñòðîêè â ýòîì ôàéëå:
| #
| # 01.02.03.04.05.06[([èìÿïîëüçîâàòåëÿ@][èìÿòåðìèíàëà])] [ôàéë [ôàéë ...]]] [# êîììåíòàðèé]
| #
| # Ïðèìåðû:
| #
| # 02.03.04.05.06.07 file1
| #
| # Îçíà÷àåò, ÷òî òåðìèíàë ñ ìàê-àäðåñîì 02.03.04.05.06.07 ïðî÷èòàåò
| # ïàðàìåòðû èç ôàéëà ListIncludes/file1.
| #
| #
| # 03.04.05.06.07.08(vasja@) file2
| #
| # Îçíà÷àåò, ÷òî òåðìèíàë ñ ìàê-àäðåñîì 03.04.05.06.07.08 ïðî÷èòàåò
| # ïàðàìåòðû èç ôàéëà ListIncludes/file2 è â îêîøêî "Âõîä â Windows"
| # ïîäñòàâèò èìÿ ïîëüçîâàòåëÿ "vasja".
| #
| #
| # 04.05.06.07.08.09(term5) file6 file7 # Êîìï çàìãëàâáóõà.
| #
| # Îçíà÷àåò, ÷òî òåðìèíàëó ñ ìàê-àäðåñîì 04.05.06.07.08.09 áóäåò
| # ïðèñâîåíî èìÿ term5, àíàëîãè÷íî óêàçàíèþ ïàðàìåòðà clienthostname,
| # è îí ïðî÷èòàåò ïàðàìåòðû èç ôàéëîâ ListIncludes/file6 è
| # ListIncludes/file7.
| #
| #
| # ×òîáû ìîæíî áûëî óêàçûâàòü èìÿ ïîëüçîâàòåëÿ ðóññêèìè áóêâàìè, íàäî
| # îòêðûòü ýòîò ôàéë â Notepad è ñîõðàíèòü ñ Encoding: Unicode.
| #
\----------------------------------------------------
[initrd] tftp: download file Terminals\00.01.6C.C4.45.8B\config.wtc from 10.0.0.1.
/--- FILE "/tmp/config.wtc" -----------------------
| [BOM]
| user=User5
| graphic=abcdefg
| disk=floppy;cdrom;usb
| sound=on
| video=radeonfb(F)
| resolution=1280x1024
| bpp=32
| turnoffmenu=always
| connection
\----------------------------------------------------
[initrd] tftp: download file Everyone\all.wtc from 10.0.0.1.
/--- FILE "/tmp/all.wtc" -----------------------
| server=10.0.0.1
| server=10.0.0.1
| server=10.0.0.1
\----------------------------------------------------
[initrd] tftp: download file Everyone\wtware.lic from 10.0.0.1.
/--- FILE "/tmp/tmp.wtc" -----------------------
| #
| # Â ýòîò ôàéë ñêëàäûâàþòñÿ ëèöåíçèè íà òåðìèíàëû. Ïîëíûå
| # ëèöåíçèè íåîáõîäèìî ïîêóïàòü çà äåíüãè, ïîäðîáíåå çäåñü:
| #
| #
http://wtware.ru/buy.html
| #
| #
| # Ëèöåíçèÿ WTware ñîñòîèò èç ïÿòè ñòðîê, êîòîðûå íóæíî áåç
| # èçìåíåíèé ïåðåíåñòè â ýòîò ôàéë. Ïîäðîáíåå ïðî ëèöåíçèè
| # ÷èòàéòå çäåñü:
| #
| #
http://wtware.ru/licensing/terms.html
| #
\----------------------------------------------------
[initrd] Hostname: "wtw00016CC4458B".
RSHd listener active.
Everyone can control terminal by http.
[initrd] tftp: download and unpack file 4.9.28\packages\f from 10.0.0.1.
[initrd] tftp: download and unpack file 4.9.28\packages\graphic from 10.0.0.1.
[gm] WTware session manager v.4.9.28.
[gm] New mode: 1280x1024, 32 bit, 0 Hz, modeline "", DDC enabled, connector 0.
[gm] Mouse PnP: IMPS2 or EXPPS2?
[gm] Mouse PnP: EXPPS2.
[gm] +--- Executing "/sbin/modprobe fbcon"
[gm] +- Errorlevel: 0, output:
[gm] +------------------------
[gm] /sbin/modprobe radeonfb mode_option=1280x1024-32
[gm] +--- Executing "/sbin/modprobe radeonfb mode_option=1280x1024-32"
[KERNEL] radeonfb 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[KERNEL] radeonfb: Found Intel x86 BIOS ROM Image
[KERNEL] radeonfb: Retrieved PLL infos from BIOS
[KERNEL] radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=240.00 Mhz, System=200.00 MHz
[KERNEL] radeonfb: PLL min 20000 max 40000
[KERNEL] i2c i2c-1: unable to read EDID block.
[KERNEL] i2c i2c-1: unable to read EDID block.
[KERNEL] i2c i2c-1: unable to read EDID block.
[KERNEL] i2c i2c-3: unable to read EDID block.
[KERNEL] i2c i2c-3: unable to read EDID block.
[KERNEL] i2c i2c-3: unable to read EDID block.
[KERNEL] radeonfb: Monitor 1 type CRT found
[KERNEL] radeonfb: EDID probed
[KERNEL] radeonfb: Monitor 2 type no found
[KERNEL] fbcon: ATI Radeon 5960 (fb0) is primary device
[gm] +- Errorlevel: 0, output:
[KERNEL] Console: switching to colour frame buffer device 160x64
[KERNEL] radeonfb (0000:01:00.0): ATI Radeon 5960 "Y`"
[gm] +------------------------
[gm] Kernel framebuffer module loaded.
[gm] Framebuffer device found.
[gm] Final framebuffer videomode: 1280x1024-32@75.
[gm] xres 1280, xres_virtual 1280, yres 1024, yres_virtual 1024, bits_per_pixel 32
[gm] VSI.pixclock 7407, sync 00000003
[gm] left_margin 248, right_margin 16, hsync_len 144
[gm] upper_margin 38, lower_margin 1, vsync_len 3
[gm] LINELENBYTES 5120
[gm] VLEN 5242880
[gm] WTware TFTP v.4.9.28.
[gm] tftp: download and unpack file 4.9.28\packages\sound from 10.0.0.1.
[gm] Run sound daemon.
[pfac] Got command line /sbin/rdpsnd 1 0.
[pfac] Ok, PID 438.
[gm] Loading ISO 9660 and UDF CDROM filesystem drivers.
[gm] +--- Executing "/sbin/modprobe udf"
[rdpsnd] RDP Sound Redirector, WTware v.4.9.28.
[gm] +- Errorlevel: 0, output:
[gm] +------------------------
[gm] +--- Executing "/sbin/modprobe isofs"
[gm] +- Errorlevel: 0, output:
[gm] +------------------------
[gm] Loading UTF8 charset.
[gm] +--- Executing "/sbin/modprobe nls_cp437"
[gm] +- Errorlevel: 0, output:
[gm] +------------------------
[gm] +--- Executing "/sbin/modprobe nls_utf8"
[gm] +- Errorlevel: 0, output:
[gm] +------------------------
[gm] Loading VFAT filesystem driver.
[gm] +--- Executing "/sbin/modprobe fat"
[gm] +- Errorlevel: 0, output:
[gm] +------------------------
[gm] +--- Executing "/sbin/modprobe vfat"
[gm] +- Errorlevel: 0, output:
[gm] +------------------------
[gm] +--- Executing "/sbin/modprobe ntfs"
[gm] +- Errorlevel: 0, output:
[KERNEL] NTFS driver 2.1.30 [Flags: R/O MODULE].
[gm] +------------------------
[gm] Loading IDE bus driver.
[gm] +--- Executing "/sbin/modprobe libata dma=2"
[KERNEL] SCSI subsystem initialized
[gm] +- Errorlevel: 0, output:
[KERNEL] libata version 3.00 loaded.
[gm] +------------------------
[gm] +--- Executing "/sbin/modprobe ata_piix"
[KERNEL] ata_piix 0000:00:1f.1: version 2.13
[KERNEL] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[KERNEL] ata_piix 0000:00:1f.1: setting latency timer to 64
[KERNEL] scsi0 : ata_piix
[KERNEL] scsi1 : ata_piix
[KERNEL] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[KERNEL] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[KERNEL] ata2.00: ATAPI: CREATIVE iR CD5222E-B, C0.18, max MWDMA2
[KERNEL] ata2.00: configured for MWDMA2
[KERNEL] scsi 1:0:0:0: CD-ROM CREATIVE iR CD5222E-B 0.18 PQ: 0 ANSI: 5
[gm] +- Errorlevel: 0, output:
[gm] +------------------------
[gm] ATA module ata_piix.ko loaded.
[gm] Loading cdrom driver.
[gm] +--- Executing "/sbin/modprobe usb-storage"
[KERNEL] Initializing USB Mass Storage driver...
[KERNEL] scsi2 : usb-storage 1-1:1.0
[gm] +- Errorlevel: 0, output:
[KERNEL] usbcore: registered new interface driver usb-storage
[KERNEL] USB Mass Storage support registered.
[gm] +------------------------
[gm] +--- Executing "/sbin/modprobe sr_mod"
[KERNEL] sr0: scsi3-mmc drive: 0x/52x cd/rw xa/form2 cdda tray
[KERNEL] cdrom: Uniform CD-ROM driver Revision: 3.20
[KERNEL] sr 1:0:0:0: Attached scsi CD-ROM sr0
[hotplug] Block device 11:0. No action.
[gm] +- Errorlevel: 0, output:
[gm] +------------------------
[gm] Loading usb storage driver.
[gm] +--- Executing "/sbin/modprobe scsi_mod"
[gm] +- Errorlevel: 0, output:
[gm] +------------------------
[gm] +--- Executing "/sbin/modprobe usb-storage"
[hotplug] Block device 11:0. No action.
[gm] +- Errorlevel: 0, output:
[gm] +------------------------
[gm] +--- Executing "/sbin/modprobe sd_mod"
[gm] +- Errorlevel: 0, output:
[gm] +------------------------
[gm] Loading floppy driver.
[gm] +--- Executing "/sbin/modprobe floppy"
[KERNEL] FDC 0 is a post-1991 82077
[gm] +- Errorlevel: 0, output:
[gm] +------------------------
[gm] Loading ALSA sound card driver.
[gm] +--- Executing "/sbin/modprobe snd-intel8x0"
[KERNEL] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[KERNEL] Intel ICH 0000:00:1f.5: setting latency timer to 64
[KERNEL] intel8x0_measure_ac97_clock: measured 50667 usecs (2442 samples)
[KERNEL] intel8x0: clocking to 48000
[gm] +- Errorlevel: 0, output:
[gm] +------------------------
[gm] ALSA module snd-intel8x0.ko loaded.
[pfac] Got command line /sbin/resolver 0 dns [10.0.0.1].
[pfac] Ok, PID 531.
[pfac] Process pid 531 terminated, status 00000000.
[gm] 10.0.0.1 => 10.0.0.1.
[gm] Free ram before fork terminal client /sbin/rdpclient (session 1): 241148 Kb.
[pfac] Got command line /sbin/rdpclient 1.
[pfac] Ok, PID 532.
[rdpclient 532] RDP Terminal Client, WTware v.4.9.28, pipe 1, pid 532.
[rdpclient 532] Add RDPDR channel.
[rdpclient 532] Add RDPSND channel.
[rdpclient 532] Add WTVC WTware control channel.
[rdpclient 532] Make RDP session with 10.0.0.1:3389.
[rdpclient 532] Username: "User5".
[rdpclient 532] No password.
[rdpclient 532] No domain.
[rdpclient 532] No shell.
[rdpclient 532] No directory.
[rdpclient 532] Window: 1280x1024@24.
[rdpclient 532] PFlags 0x000001C0.
[rdpclient 532] Keyboard 00000409:00000000.
[rdpclient 532] My hostname "wtw00016CC4458B".
[rdpclient 532] TCP: connecting to 10.0.0.1:3389.
[rdpclient 532] TCP: connection with 10.0.0.1:3389 established.
[rdpclient 532] Free ram after buffers allocation: 234420 KB.
[rdpclient 532] RDP5 encryption (X.509).
[rdpclient 532] RC4 key 128 bit.
[KERNEL] scsi 2:0:0:0: Direct-Access silicon -power 0.00 PQ: 0 ANSI: 0 CCS
[KERNEL] sd 2:0:0:0: [sda] 15659008 512-byte logical blocks: (8.01 GB/7.46 GiB)
[KERNEL] sd 2:0:0:0: [sda] Write Protect is off
[KERNEL] sd 2:0:0:0: [sda] Mode Sense: 23 00 00 00
[KERNEL] sd 2:0:0:0: [sda] Assuming drive cache: write through
[KERNEL] sd 2:0:0:0: [sda] Assuming drive cache: write through
[KERNEL] sda: sda1
[KERNEL] FAT: invalid media value (0x00)
[KERNEL] VFS: Can't find a valid FAT filesystem on dev sda.
[KERNEL] ------------[ cut here ]------------
[KERNEL] WARNING: at block/genhd.c:1443 0xc01dbb9c()
[KERNEL] Hardware name:
[KERNEL] Modules linked in: snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm snd_timer snd soundcore snd_page_alloc floppy sd_mod sr_mod cdrom usb_storage ata_piix libata scsi_mod ntfs vfat fat nls_utf8 nls_cp437 isofs udf radeonfb fb_ddc i2c_algo_bit cfbcopyarea i2c_core cfbimgblt cfbfillrect fbcon tileblit font bitblit softcursor fb fbdev 8139cp 8139too mii
[KERNEL] Pid: 538, comm: hotplug Not tainted 2.6.39 #1
[KERNEL] Call Trace:
[KERNEL] [<c0121fe8>] ? 0xc0121fe8
[KERNEL] [<c01dbb9c>] ? 0xc01dbb9c
[KERNEL] [<c01dbb9c>] ? 0xc01dbb9c
[KERNEL] [<c012203b>] ? 0xc012203b
[KERNEL] [<c01dbb9c>] ? 0xc01dbb9c
[KERNEL] [<c01a7861>] ? 0xc01a7861
[KERNEL] [<c017e475>] ? 0xc017e475
[KERNEL] [<c017eb72>] ? 0xc017eb72
[KERNEL] [<c01e3043>] ? 0xc01e3043
[KERNEL] [<d197f218>] ? 0xd197f218
[KERNEL] [<d197f220>] ? 0xd197f220
[KERNEL] [<c017f2dd>] ? 0xc017f2dd
[KERNEL] [<c0195919>] ? 0xc0195919
[KERNEL] [<c0195bc9>] ? 0xc0195bc9
[KERNEL] [<c0195d6f>] ? 0xc0195d6f
[KERNEL] [<c01973cd>] ? 0xc01973cd
[KERNEL] [<c0196fa8>] ? 0xc0196fa8
[KERNEL] [<c01979c2>] ? 0xc01979c2
[KERNEL] [<c03119e5>] ? 0xc03119e5
[KERNEL] ---[ end trace 2553af0e9a913b84 ]---
[hotplug] R/w FAT mount ("/dev/sda", "/mnt/usb-rdp/0",..) failed, errno 22.
[KERNEL] sd 2:0:0:0: [sda] Assuming drive cache: write through
[KERNEL] sd 2:0:0:0: [sda] Attached SCSI removable disk
[KERNEL] NTFS-fs warning (device sda): is_boot_sector_ntfs(): Invalid boot sector checksum.
[KERNEL] NTFS-fs error (device sda): read_ntfs_boot_sector(): Primary boot sector is invalid.
[KERNEL] NTFS-fs error (device sda): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover.
[KERNEL] NTFS-fs error (device sda): ntfs_fill_super(): Not an NTFS volume.
[hotplug] R/o NTFS mount ("/dev/sda", "/mnt/usb-rdp/0",..) failed, errno 22.
[KERNEL] FAT: invalid media value (0x00)
[KERNEL] VFS: Can't find a valid FAT filesystem on dev sda.
[hotplug] R/o FAT mount ("/dev/sda", "/mnt/usb-rdp/0",..) failed, errno 22.
[hotplug] R/w FAT mount ("/dev/sda1", "/mnt/usb-rdp/1",..) failed, errno 22.
[KERNEL] FAT: bogus number of reserved sectors
[KERNEL] VFS: Can't find a valid FAT filesystem on dev sda1.
[hotplug] Success: USB1p1 mounted.
[KERNEL] NTFS volume version 3.1.
[rdpclient 532] LOGON_EX_LOGONERRORS
[rdpclient 532] SessionId 0x00000005: SERVA\User3.
[rdpclient 532] Sound redirection: 22050 frames per second.
[rdpsnd] Force stereo sound.
[rdpsnd] ALSA buffer size 32768 bytes.
[rdpsnd] ALSA: "Master Playback Switch".
[rdpsnd] ALSA: "Master Playback Volume".
[rdpsnd] ALSA: "Center Playback Switch".
[rdpsnd] ALSA: "Center Playback Volume".
[rdpsnd] ALSA: "LFE Playback Switch".
[rdpsnd] ALSA: "LFE Playback Volume".
[rdpsnd] ALSA: "Surround Playback Switch".
[rdpsnd] ALSA: "Surround Playback Volume".
[rdpsnd] ALSA: "Master Mono Playback Switch".
[rdpsnd] ALSA: "Master Mono Playback Volume".
[rdpsnd] ALSA: "Beep Playback Switch".
[rdpsnd] ALSA: "Beep Playback Volume".
[rdpsnd] ALSA: "Phone Playback Switch".
[rdpsnd] ALSA: "Phone Playback Volume".
[rdpsnd] ALSA: "Mic Playback Switch".
[rdpsnd] ALSA: "Mic Playback Volume".
[rdpsnd] ALSA: "Mic Boost (+20dB)".
[rdpsnd] ALSA: "Line Playback Switch".
[rdpsnd] ALSA: "Line Playback Volume".
[rdpsnd] ALSA: "CD Playback Switch".
[rdpsnd] ALSA: "CD Playback Volume".
[rdpsnd] ALSA: "Aux Playback Switch".
[rdpsnd] ALSA: "Aux Playback Volume".
[rdpsnd] ALSA: "PCM Playback Switch".
[rdpsnd] ALSA: "PCM Playback Volume".
[rdpsnd] ALSA: "Capture Source".
[rdpsnd] ALSA: "Capture Switch".
[rdpsnd] ALSA: "Capture Volume".
[rdpsnd] ALSA: "Mono Output Select".
[rdpsnd] ALSA: "Mic Select".
[rdpsnd] ALSA: "IEC958 Playback Con Mask".
[rdpsnd] ALSA: "IEC958 Playback Pro Mask".
[rdpsnd] ALSA: "IEC958 Playback Default".
[rdpsnd] ALSA: "IEC958 Playback Switch".
[rdpsnd] ALSA: "IEC958 Playback AC97-SPSA".
[rdpsnd] ALSA: "Duplicate Front".
[rdpsnd] ALSA: "Surround Jack Mode".
[rdpsnd] ALSA: "Channel Mode".
[rdpsnd] ALSA: "IEC958 Capture Switch".
[rdpsnd] ALSA: "IEC958 Playback Source".
[rdpsnd] ALSA: "External Amplifier".
[KERNEL] usb 1-1: USB disconnect, device number 2
[hotplug] /dev/sda1 unmounted from /mnt/usb-rdp/1.
Send WTCU discover to 192.168.1.2.
Send WTCU discover to 10.0.0.1.
[KERNEL] usb 1-4: new high speed USB device number 3 using ehci_hcd
[KERNEL] usb 1-4: New USB device found, idVendor=13fe, idProduct=1f23
[KERNEL] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[KERNEL] usb 1-4: Product: -power
[KERNEL] usb 1-4: Manufacturer: silicon
[KERNEL] usb 1-4: SerialNumber: E69112001951
[KERNEL] scsi3 : usb-storage 1-4:1.0
[KERNEL] scsi 3:0:0:0: Direct-Access silicon -power 0.00 PQ: 0 ANSI: 0 CCS
[KERNEL] sd 3:0:0:0: [sda] 15659008 512-byte logical blocks: (8.01 GB/7.46 GiB)
[KERNEL] sd 3:0:0:0: [sda] Write Protect is off
[KERNEL] sd 3:0:0:0: [sda] Mode Sense: 23 00 00 00
[KERNEL] sd 3:0:0:0: [sda] Assuming drive cache: write through
[KERNEL] sd 3:0:0:0: [sda] Assuming drive cache: write through
[KERNEL] sda: sda1
[KERNEL] FAT: invalid media value (0x00)
[KERNEL] VFS: Can't find a valid FAT filesystem on dev sda.
[hotplug] R/w FAT mount ("/dev/sda", "/mnt/usb-rdp/0",..) failed, errno 22.
[KERNEL] sd 3:0:0:0: [sda] Assuming drive cache: write through
[KERNEL] sd 3:0:0:0: [sda] Attached SCSI removable disk
[KERNEL] NTFS-fs warning (device sda): is_boot_sector_ntfs(): Invalid boot sector checksum.
[KERNEL] NTFS-fs error (device sda): read_ntfs_boot_sector(): Primary boot sector is invalid.
[KERNEL] NTFS-fs error (device sda): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover.
[KERNEL] NTFS-fs error (device sda): ntfs_fill_super(): Not an NTFS volume.
[hotplug] R/o NTFS mount ("/dev/sda", "/mnt/usb-rdp/0",..) failed, errno 22.
[KERNEL] FAT: invalid media value (0x00)
[KERNEL] VFS: Can't find a valid FAT filesystem on dev sda.
[hotplug] R/o FAT mount ("/dev/sda", "/mnt/usb-rdp/0",..) failed, errno 22.
[KERNEL] FAT: bogus number of reserved sectors
[KERNEL] VFS: Can't find a valid FAT filesystem on dev sda1.
[hotplug] R/w FAT mount ("/dev/sda1", "/mnt/usb-rdp/1",..) failed, errno 22.
[hotplug] Success: USB1p1 mounted.
[KERNEL] NTFS volume version 3.1.
[KERNEL] usb 1-4: USB disconnect, device number 3
[hotplug] /dev/sda1 unmounted from /mnt/usb-rdp/1.
Connection from wtc.exe at 10.0.0.1.
[gm] Mount media CD.
[gm] UDF mount ("/dev/sr0", "/mnt/rdpdr-CD",..) failed, errno 123.
[gm] ISO 9660 mount ("/dev/sr0", "/mnt/rdpdr-CD",..) failed, errno 123.
[gm] Mount media CD.
[gm] UDF mount ("/dev/sr0", "/mnt/rdpdr-CD",..) failed, errno 123.
[gm] ISO 9660 mount ("/dev/sr0", "/mnt/rdpdr-CD",..) failed, errno 123.
[KERNEL] usb 1-4: new high speed USB device number 4 using ehci_hcd
[KERNEL] usb 1-4: New USB device found, idVendor=13fe, idProduct=1f23
[KERNEL] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[KERNEL] usb 1-4: Product: -power
[KERNEL] usb 1-4: Manufacturer: silicon
[KERNEL] usb 1-4: SerialNumber: E69112001951
[KERNEL] scsi4 : usb-storage 1-4:1.0
[KERNEL] scsi 4:0:0:0: Direct-Access silicon -power 0.00 PQ: 0 ANSI: 0 CCS
[KERNEL] sd 4:0:0:0: [sda] 15659008 512-byte logical blocks: (8.01 GB/7.46 GiB)
[KERNEL] sd 4:0:0:0: [sda] Write Protect is off
[KERNEL] sd 4:0:0:0: [sda] Mode Sense: 23 00 00 00
[KERNEL] sd 4:0:0:0: [sda] Assuming drive cache: write through
[KERNEL] sd 4:0:0:0: [sda] Assuming drive cache: write through
[KERNEL] sda: sda1
[KERNEL] FAT: invalid media value (0x00)
[KERNEL] VFS: Can't find a valid FAT filesystem on dev sda.
[hotplug] R/w FAT mount ("/dev/sda", "/mnt/usb-rdp/0",..) failed, errno 22.
[KERNEL] sd 4:0:0:0: [sda] Assuming drive cache: write through
[KERNEL] sd 4:0:0:0: [sda] Attached SCSI removable disk
[KERNEL] NTFS-fs warning (device sda): is_boot_sector_ntfs(): Invalid boot sector checksum.
[KERNEL] NTFS-fs error (device sda): read_ntfs_boot_sector(): Primary boot sector is invalid.
[KERNEL] NTFS-fs error (device sda): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover.
[KERNEL] NTFS-fs error (device sda): ntfs_fill_super(): Not an NTFS volume.
[hotplug] R/o NTFS mount ("/dev/sda", "/mnt/usb-rdp/0",..) failed, errno 22.
[hotplug] R/o FAT mount ("/dev/sda", "/mnt/usb-rdp/0",..) failed, errno 22.
[KERNEL] FAT: invalid media value (0x00)
[KERNEL] VFS: Can't find a valid FAT filesystem on dev sda.
[hotplug] R/w FAT mount ("/dev/sda1", "/mnt/usb-rdp/1",..) failed, errno 22.
[KERNEL] FAT: bogus number of reserved sectors
[KERNEL] VFS: Can't find a valid FAT filesystem on dev sda1.
[hotplug] Success: USB1p1 mounted.
[KERNEL] NTFS volume version 3.1.
Также существует проблема с флешками (пишет диск защищен от записи).
Что подскажете?