Установка USB принтера на терминал Windows 10

Штатное перенаправление USB через RDP, встроенное в Windows Server
Ответить
RKV
Сообщения: 18
Зарегистрирован: Ср окт 02, 2019 5:19 pm

Установка USB принтера на терминал Windows 10

Сообщение RKV » Пт ноя 01, 2019 6:23 pm

Доброго времени суток!

Никак не могу укротить USB принтер. Почитал документацию, возможно я что-то не понял, что-то делаю не так.
Опишу исходные данные:
1) терминальный сервер Windows 10 x64
2) USB принтер HP LaserJet M104a
На официальном сайте HP под ОС Windows 10 x64 есть ПО с драйверами, вот только при установке требуется, чтобы USB устройство было подключено.
Что сделал:
1) узнал USB:id устройства
2) прописал в конфиг файл настройки
usb=03f0:612a, debug
Что ожидается:
1) наблюдать в "диспетчере устройств" данный принтер
2) хоть как-то наблюдать его в системе, сейчас складывается впечатление, что принтер не доходит до ОС даже

Имею следующий лог файл:
[ KERNEL] [ 0.105117] usbcore: registered new interface driver usbfs
[ KERNEL] [ 0.105123] usbcore: registered new interface driver hub
[ KERNEL] [ 0.105138] usbcore: registered new device driver usb

[ KERNEL] [ 0.572105] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ KERNEL] [ 0.572106] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ KERNEL] [ 0.572108] usb usb1: Product: EHCI Host Controller
[ KERNEL] [ 0.572109] usb usb1: Manufacturer: Linux 4.14.147 ehci_hcd
[ KERNEL] [ 0.572109] usb usb1: SerialNumber: 0000:00:1a.0
[ KERNEL] [ 0.572233] hub 1-0:1.0: USB hub found
[ KERNEL] [ 0.572239] hub 1-0:1.0: 3 ports detected
[ KERNEL] [ 0.572524] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ KERNEL] [ 0.572530] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ KERNEL] [ 0.572542] ehci-pci 0000:00:1d.0: debug port 2
[ KERNEL] [ 0.576450] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ KERNEL] [ 0.576468] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf2539000
[ KERNEL] [ 0.592066] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ KERNEL] [ 0.592100] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ KERNEL] [ 0.592101] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ KERNEL] [ 0.592102] usb usb2: Product: EHCI Host Controller
[ KERNEL] [ 0.592103] usb usb2: Manufacturer: Linux 4.14.147 ehci_hcd
[ KERNEL] [ 0.592104] usb usb2: SerialNumber: 0000:00:1d.0
[ KERNEL] [ 0.592206] hub 2-0:1.0: USB hub found
[ KERNEL] [ 0.592212] hub 2-0:1.0: 3 ports detected
[ KERNEL] [ 0.592381] ehci-platform: EHCI generic platform driver
[ KERNEL] [ 0.592399] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ KERNEL] [ 0.592400] ohci-pci: OHCI PCI platform driver
[ KERNEL] [ 0.592413] ohci-platform: OHCI generic platform driver
[ KERNEL] [ 0.592424] uhci_hcd: USB Universal Host Controller Interface driver
[ KERNEL] [ 0.592534] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ KERNEL] [ 0.592539] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ KERNEL] [ 0.593639] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x000000000000b930
[ KERNEL] [ 0.593645] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ KERNEL] [ 0.593727] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ KERNEL] [ 0.593728] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ KERNEL] [ 0.593729] usb usb3: Product: xHCI Host Controller
[ KERNEL] [ 0.593730] usb usb3: Manufacturer: Linux 4.14.147 xhci-hcd
[ KERNEL] [ 0.593731] usb usb3: SerialNumber: 0000:00:14.0
[ KERNEL] [ 0.593835] hub 3-0:1.0: USB hub found
[ KERNEL] [ 0.593846] hub 3-0:1.0: 4 ports detected
[ KERNEL] [ 0.594282] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ KERNEL] [ 0.594286] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ KERNEL] [ 0.594289] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ KERNEL] [ 0.594330] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ KERNEL] [ 0.594332] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ KERNEL] [ 0.594333] usb usb4: Product: xHCI Host Controller
[ KERNEL] [ 0.594335] usb usb4: Manufacturer: Linux 4.14.147 xhci-hcd
[ KERNEL] [ 0.594336] usb usb4: SerialNumber: 0000:00:14.0
[ KERNEL] [ 0.594434] hub 4-0:1.0: USB hub found
[ KERNEL] [ 0.594445] hub 4-0:1.0: 4 ports detected
[ KERNEL] [ 0.594957] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ KERNEL] [ 0.596780] serio: i8042 KBD port at 0x60,0x64 irq 1
[ KERNEL] [ 0.596785] serio: i8042 AUX port at 0x60,0x64 irq 12
[ KERNEL] [ 0.596829] hv_vmbus: registering driver hyperv_keyboard
[ KERNEL] [ 0.596874] mousedev: PS/2 mouse device common for all mice
[ KERNEL] [ 0.597040] usbcore: registered new interface driver synaptics_usb
[ KERNEL] [ 0.597078] usbcore: registered new interface driver usbtouchscreen
[ KERNEL] [ 0.597123] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ KERNEL] [ 0.597236] rtc_cmos 00:02: RTC can wake from S4
[ KERNEL] [ 0.597398] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ KERNEL] [ 0.597425] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ KERNEL] [ 0.597636] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ KERNEL] [ 0.598214] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ KERNEL] [ 0.599141] cpufreq_nforce2: No nForce2 chipset
[ KERNEL] [ 0.599145] intel_pstate: Intel P-state driver initializing
[ KERNEL] [ 0.599452] hidraw: raw HID events driver (C) Jiri Kosina
[ KERNEL] [ 0.599580] hv_vmbus: registering driver hid_hyperv
[ KERNEL] [ 0.599781] usbcore: registered new interface driver usbhid
[ KERNEL] [ 0.599782] usbhid: USB HID core driver
[ KERNEL] [ 0.599927] NET: Registered protocol family 17
[ KERNEL] [ 0.600714] Using IPI No-Shortcut mode
[ KERNEL] [ 0.600718] sched_clock: Marking stable (600010052, 0)->(596364471, 3645581)
[ KERNEL] [ 0.601235] rtc_cmos 00:02: setting system clock to 2019-11-01 15:13:46 UTC (1572621226)
[ KERNEL] [ 0.601975] Freeing unused kernel memory: 4120K
[ KERNEL] [ 0.632304] Write protecting the kernel text: 3976k
[ KERNEL] [ 0.632488] Write protecting the kernel read-only data: 860k
[ hotplug] [ 0.850621] Block device 254:0. No action.
[ KERNEL] [ 0.916059] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ KERNEL] [ 0.928072] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ pfac] [ 0.935034] Run /sbin/initrd.
[ pfac] [ 0.935069] Ok, PID 781.
[ initrd] [ 0.935430] WTware 5.8.67 shell.
[ initrd] [ 0.936424] HDD/MMC/SD boot.
[ initrd] [ 0.972161] Load VFAT filesystem driver.
[ initrd] [ 0.972184] modprobe fat.
[ initrd] [ 0.973220] modprobe vfat.
[ initrd] [ 0.974227] Load IDE bus driver.
[ initrd] [ 0.974250] modprobe libata.
[ KERNEL] [ 0.975282] SCSI subsystem initialized
[ KERNEL] [ 0.975849] libata version 3.00 loaded.
[ initrd] [ 0.976821] modprobe ahci.
[ KERNEL] [ 0.978022] ahci 0000:00:1f.2: version 3.0
[ KERNEL] [ 0.978231] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ KERNEL] [ 0.988341] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x13 impl SATA mode
[ KERNEL] [ 0.988346] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part ems sxs apst
[ KERNEL] [ 1.014072] scsi host0: ahci
[ KERNEL] [ 1.014326] scsi host1: ahci
[ KERNEL] [ 1.014631] scsi host2: ahci
[ KERNEL] [ 1.014899] scsi host3: ahci
[ KERNEL] [ 1.015009] scsi host4: ahci
[ KERNEL] [ 1.015250] scsi host5: ahci
[ KERNEL] [ 1.015296] ata1: SATA max UDMA/133 abar m2048@0xf2538000 port 0xf2538100 irq 25
[ KERNEL] [ 1.015298] ata2: SATA max UDMA/133 abar m2048@0xf2538000 port 0xf2538180 irq 25
[ KERNEL] [ 1.015299] ata3: DUMMY
[ KERNEL] [ 1.015300] ata4: DUMMY
[ KERNEL] [ 1.015303] ata5: SATA max UDMA/133 abar m2048@0xf2538000 port 0xf2538300 irq 25
[ KERNEL] [ 1.015303] ata6: DUMMY
[ KERNEL] [ 1.072448] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ KERNEL] [ 1.072452] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ KERNEL] [ 1.072687] hub 1-1:1.0: USB hub found
[ KERNEL] [ 1.072776] hub 1-1:1.0: 6 ports detected
[ KERNEL] [ 1.084441] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ KERNEL] [ 1.084445] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ KERNEL] [ 1.084674] hub 2-1:1.0: USB hub found
[ KERNEL] [ 1.084774] hub 2-1:1.0: 8 ports detected
[ KERNEL] [ 1.292565] random: fast init done
[ KERNEL] [ 1.301583] psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498]
[ KERNEL] [ 1.330781] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ KERNEL] [ 1.332265] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (unknown) succeeded
[ KERNEL] [ 1.332272] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (unknown) filtered out
[ KERNEL] [ 1.360069] usb 1-1.2: new high-speed USB device number 3 using ehci-pci
[ KERNEL] [ 1.362169] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b1/0xb40000/0xa0000/0x0, board id: 0, fw id: 920262
[ KERNEL] [ 1.362176] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ KERNEL] [ 1.366176] ata1.00: ATA-8: ST320LT007-9ZV142, 0004LVM1, max UDMA/133
[ KERNEL] [ 1.366180] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ KERNEL] [ 1.369053] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (unknown) succeeded
[ KERNEL] [ 1.369057] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (unknown) filtered out
[ KERNEL] [ 1.371690] ata1.00: configured for UDMA/133
[ KERNEL] [ 1.371860] scsi 0:0:0:0: Direct-Access ATA ST320LT007-9ZV14 LVM1 PQ: 0 ANSI: 5
[ KERNEL] [ 1.372099] usb 2-1.5: new full-speed USB device number 3 using ehci-pci
[ KERNEL] [ 1.400925] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ KERNEL] [ 1.468931] usb 1-1.2: New USB device found, idVendor=03f0, idProduct=612a
[ KERNEL] [ 1.468935] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ KERNEL] [ 1.468937] usb 1-1.2: Product: HP LaserJet M101-M106
[ KERNEL] [ 1.468939] usb 1-1.2: Manufacturer: HP
[ KERNEL] [ 1.468941] usb 1-1.2: SerialNumber: VNC3710370

[ KERNEL] [ 1.491434] usb 2-1.5: New USB device found, idVendor=046d, idProduct=c534
[ KERNEL] [ 1.491439] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ KERNEL] [ 1.491441] usb 2-1.5: Product: USB Receiver
[ KERNEL] [ 1.491443] usb 2-1.5: Manufacturer: Logitech
[ KERNEL] [ 1.493500] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:046D:C534.0001/input/input8
[ KERNEL] [ 1.548086] usb 1-1.3: new full-speed USB device number 4 using ehci-pci
[ KERNEL] [ 1.552260] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.5/input0
[ KERNEL] [ 1.554868] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/0003:046D:C534.0002/input/input9
[ KERNEL] [ 1.568093] tsc: Refined TSC clocksource calibration: 2594.117 MHz
[ KERNEL] [ 1.568110] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x256486e719d, max_idle_ns: 440795338728 ns
[ KERNEL] [ 1.612273] hid-generic 0003:046D:C534.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.5/input1
[ KERNEL] [ 1.657332] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2020
[ KERNEL] [ 1.657336] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ KERNEL] [ 1.657339] usb 1-1.3: Product: Biometric Coprocessor
[ KERNEL] [ 1.657341] usb 1-1.3: Manufacturer: Auth
[ KERNEL] [ 1.686688] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ KERNEL] [ 1.690945] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (unknown) succeeded
[ KERNEL] [ 1.691718] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (unknown) succeeded
[ KERNEL] [ 1.691989] ata2.00: ATAPI: PLDS DVD-RW DS8A8SH, KU51, max UDMA/100
[ KERNEL] [ 1.699173] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (unknown) succeeded
[ KERNEL] [ 1.699962] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (unknown) succeeded
[ KERNEL] [ 1.700259] ata2.00: configured for UDMA/100
[ KERNEL] [ 1.708129] scsi 1:0:0:0: CD-ROM PLDS DVD-RW DS8A8SH KU51 PQ: 0 ANSI: 5
[ KERNEL] [ 1.740065] usb 1-1.4: new full-speed USB device number 5 using ehci-pci
[ KERNEL] [ 1.856068] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6
[ KERNEL] [ 1.856072] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ KERNEL] [ 1.856075] usb 1-1.4: Product: BCM20702A0
[ KERNEL] [ 1.856077] usb 1-1.4: Manufacturer: Broadcom Corp
[ KERNEL] [ 1.856079] usb 1-1.4: SerialNumber: 7CE9D3E7A0BB
[ KERNEL] [ 1.936092] usb 1-1.6: new high-speed USB device number 6 using ehci-pci
[ KERNEL] [ 2.030799] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ KERNEL] [ 2.051453] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b2db
[ KERNEL] [ 2.051458] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ KERNEL] [ 2.051461] usb 1-1.6: Product: Integrated Camera
[ KERNEL] [ 2.051464] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[ KERNEL] [ 2.054794] ata5: SATA link down (SStatus 0 SControl 300)
[ initrd] [ 2.055109] ATA module ahci.ko loaded.
[ initrd] [ 2.055242] modprobe pata_legacy all=1.
[ KERNEL] [ 2.056873] scsi host6: pata_legacy
[ KERNEL] [ 2.056914] ata7: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
[ KERNEL] [ 2.226806] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7
[ KERNEL] [ 2.236541] scsi host6: pata_legacy
[ KERNEL] [ 2.236577] ata8: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
[SYSLOG] <29>Nov 1 15:13:48 modprobe: FATAL: Error inserting pata_legacy (/lib/modules/4.14.147/kernel/drivers/ata/pata_legacy.ko): No such device

[ initrd] [ 2.464383] modprobe mmc_block.
[ initrd] [ 2.465758] modprobe sdhci-pci.
[ KERNEL] [ 2.466897] sdhci: Secure Digital Host Controller Interface driver
[ KERNEL] [ 2.466898] sdhci: Copyright(c) Pierre Ossman
[ KERNEL] [ 2.467076] sdhci-pci 0000:02:00.0: SDHCI controller found [1180:e822] (rev 7)
[ KERNEL] [ 2.467520] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[ initrd] [ 2.468390] modprobe sdhci-acpi.
[ KERNEL] [ 2.468169] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA
[ initrd] [ 2.469569] modprobe rtsx_pci_sdmmc.
[ initrd] [ 2.470892] Load HDD drivers.
[ initrd] [ 2.470917] modprobe sd_mod.
[ KERNEL] [ 2.472151] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ KERNEL] [ 2.472154] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ KERNEL] [ 2.472163] sd 0:0:0:0: [sda] Write Protect is off
[ KERNEL] [ 2.472165] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ KERNEL] [ 2.472180] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ KERNEL] [ 2.508393] sda: sda1 sda2
[ KERNEL] [ 2.508629] sd 0:0:0:0: [sda] Attached SCSI disk
[ initrd] [ 2.518130] Success: media /dev/sda1 mounted to /bootmedia.
[ initrd] [ 2.564559] Cache package files.
[ initrd] [ 2.564581] WTpassword present: 5826066300145acd1df8d9194ba93fa8.
[ initrd] [ 2.586218] [FILE CACHE] Take 'packages/lib6' from cache.
[ KERNEL] [ 2.592118] clocksource: Switched to clocksource tsc
[ initrd] [ 2.598688] PCI: C 02 8086:1502 Network controller Intel Corporation 82579LM Gigabit Network Connection (Lewisville).
[ initrd] [ 2.598703] PCI: C 0c:05 8086:1e22 Serial bus controller SMBus Intel Corporation 7 Series/C216 Chipset Family SMBus Controller.
[ initrd] [ 2.598716] PCI: C 06 8086:0154 Bridge Intel Corporation 3rd Gen Core processor DRAM Controller.
[ initrd] [ 2.598728] PCI: C 06:04 8086:1e12 Bridge PCI bridge Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2.
[ initrd] [ 2.598739] PCI: C 0c:03 8086:1e2d Serial bus controller USB controller Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller.
[ initrd] [ 2.598751] PCI: C 0c:03 8086:1e26 Serial bus controller USB controller Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller.
[ initrd] [ 2.598762] PCI: C 03 8086:0166 Display controller Intel Corporation 3rd Gen Core processor Graphics Controller.
[ initrd] [ 2.598774] PCI: C 0c:03 8086:1e31 Serial bus controller USB controller Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller.
[ initrd] [ 2.598786] PCI: C 06:04 8086:1e14 Bridge PCI bridge Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3.
[ initrd] [ 2.598798] PCI: C 01:06 8086:1e03 Mass storage controller SATA controller Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode].
[ initrd] [ 2.598809] PCI: C 02:80 8086:0085 Network controller Network controller Intel Corporation Centrino Advanced-N 6205 [Taylor Peak].
[ initrd] [ 2.598821] PCI: C 06:04 8086:1e10 Bridge PCI bridge Intel Corporation 7 Series/C216 Chipset Family PCI Express Root Port 1.
[ initrd] [ 2.598833] PCI: C 06:01 8086:1e55 Bridge ISA bridge Intel Corporation QM77 Express Chipset LPC Controller.
[ initrd] [ 2.598845] PCI: C 08:80 1180:e822 Generic system peripheral System peripheral Ricoh Co Ltd MMC/SD Host Controller.
[ initrd] [ 2.598857] PCI: C 07:80 8086:1e3a Communication controller Communication controller Intel Corporation 7 Series/C216 Chipset Family MEI Controller.
[ initrd] [ 2.598869] PCI: C 04:03 8086:1e20 Multimedia controller Audio device Intel Corporation 7 Series/C216 Chipset Family High Definition Audio Controller.
[ initrd] [ 2.606062] USB: 8087:0024 Intel Corp. Integrated Rate Matching Hub.
[ initrd] [ 2.606078] USB: 147e:2020 Upek TouchChip Fingerprint Coprocessor (WBF advanced mode).
[ initrd] [ 2.606087] USB: 046d:c534 Logitech, Inc. Unifying Receiver.
[ initrd] [ 2.606095] USB: 04f2:b2db Chicony Electronics Co., Ltd Thinkpad T430 camera.
[ initrd] [ 2.606103] USB: 0a5c:21e6 Broadcom Corp. BCM20702 Bluetooth 4.0 [ThinkPad].
[ initrd] [ 2.606112] USB: 03f0:612a HP, Inc.
/--- FILE "/bootmedia/configs/initrd.wtc" -----------------------
| [BOM]
| clientIP=*
| config=http
| netmedia=wifi
| setupPassword=5826066300145acd1df8d9194ba93fa8
| tftpPrefix=/wtware/
| tftpIP=192.168.1.30
| cacheFiles=on
| wifi_ssid=MikroTik
| wifi_channel=1
| wifi_security=wpa_psk
Skip 'wifi_key='.
\----------------------------------------------------
[ initrd] [ 2.973064] Load Wi-Fi wireless network card driver.
[ initrd] [ 2.996077] [FILE CACHE] Take 'packages/dbus' from cache.
[ initrd] [ 2.996120] +--- Executing "/usr/bin/dbus-uuidgen --ensure"
[ KERNEL] [ 2.996137] random: crng init done
[ initrd] [ 3.088121] +- Errorlevel: 0, output:
File is empty.
[ initrd] [ 3.088169] +------------------------
[ initrd] [ 3.088183] +--- Executing "/usr/bin/dbus-daemon --system "
[ initrd] [ 3.140934] +- Errorlevel: 0, output:
File is empty.
[ initrd] [ 3.140983] +------------------------
[ initrd] [ 3.140999] Run '/usr/bin/dbus-daemon --session --address=unix:path=/run/user/1007/bus', log '', env '', pid ''.
[ pfac] [ 3.141084] Run /usr/bin/dbus-daemon --session --address=unix:path=/run/user/1007/bus.
[ pfac] [ 3.141125] Ok, PID 1010.
[ initrd] [ 3.370315] [FILE CACHE] Take 'packages/xnet' from cache.
[ initrd] [ 3.382861] [FILE CACHE] Take 'packages/xnet6' from cache.
[ initrd] [ 3.383872] modprobe iwlwifi.
[ KERNEL] [ 3.386246] Intel(R) Wireless WiFi driver for Linux
[ KERNEL] [ 3.386247] Copyright(c) 2003- 2015 Intel Corporation
[ KERNEL] [ 3.386415] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ initrd] [ 3.387352] PCI Wi-Fi module iwlwifi.ko loaded.
[ KERNEL] [ 3.387102] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ KERNEL] [ 3.388537] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ KERNEL] [ 3.388539] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ KERNEL] [ 3.388540] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[ KERNEL] [ 3.388541] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
[ KERNEL] [ 3.424316] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ KERNEL] [ 3.487543] iwlwifi 0000:03:00.0 eth0: renamed from wlan0
/--- FILE "/etc/wpa.conf" -----------------------
| ctrl_interface=/var/run/wpa_supplicant
| network={
Skip 'psk='.
| ssid="MikroTik"
| }
\----------------------------------------------------
[ initrd] [ 3.501108] +--- Executing "/sbin/wpa_supplicant -B -c /etc/wpa.conf -i eth0 -f /tmp/wpa_supplicant.out"
[ WPA] [ 3.697259] Successfully initialized wpa_supplicant
[ KERNEL] [ 3.713547] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ KERNEL] [ 4.008870] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ initrd] [ 4.187595] +- Errorlevel: 0, output:
File is empty.
[ initrd] [ 4.187694] +------------------------
[ initrd] [ 4.220586] State SCANNING before handshake, do nothing.
[ initrd] [ 4.521321] State SCANNING before handshake, do nothing.
[ initrd] [ 4.822051] State SCANNING before handshake, do nothing.
[ initrd] [ 5.122772] State SCANNING before handshake, do nothing.
[ initrd] [ 5.423493] State SCANNING before handshake, do nothing.
[ initrd] [ 5.724225] State SCANNING before handshake, do nothing.
[ initrd] [ 6.024946] State SCANNING before handshake, do nothing.
[ initrd] [ 6.325730] State SCANNING before handshake, do nothing.
[ initrd] [ 6.626452] State SCANNING before handshake, do nothing.
[ initrd] [ 6.927214] State SCANNING before handshake, do nothing.
[ initrd] [ 7.227934] State SCANNING before handshake, do nothing.
[ WPA] [ 7.427304] eth0: SME: Trying to authenticate with 6c:3b:6b:7b:65:ff (SSID='MikroTik' freq=2412 MHz)
[ KERNEL] [ 7.427357] eth0: authenticate with 6c:3b:6b:7b:65:ff
[ KERNEL] [ 7.432662] eth0: send auth to 6c:3b:6b:7b:65:ff (try 1/3)
[ KERNEL] [ 7.453916] eth0: authenticated
[ WPA] [ 7.454018] eth0: Trying to associate with 6c:3b:6b:7b:65:ff (SSID='MikroTik' freq=2412 MHz)
[ KERNEL] [ 7.456075] eth0: associate with 6c:3b:6b:7b:65:ff (try 1/3)
[ KERNEL] [ 7.476520] eth0: RX AssocResp from 6c:3b:6b:7b:65:ff (capab=0x431 status=0 aid=2)
[ KERNEL] [ 7.505858] eth0: associated
[ WPA] [ 7.505992] eth0: Associated with 6c:3b:6b:7b:65:ff
[ WPA] [ 7.506000] eth0: CTRL-EVENT-SUBNET-STATUS-UPDATE status=0
[ WPA] [ 7.517107] eth0: WPA: Key negotiation completed with 6c:3b:6b:7b:65:ff [PTK=CCMP GTK=CCMP]
[ WPA] [ 7.517127] eth0: CTRL-EVENT-CONNECTED - Connection to 6c:3b:6b:7b:65:ff completed [id=0 id_str=]
[ initrd] [ 7.528719] wpa_state=COMPLETED
[ initrd] [ 7.528737] Download configs from HTTP 192.168.1.30 port 789 prefix '/wtware/'.
[ initrd] [ 7.528749] WTpassword present: 5826066300145acd1df8d9194ba93fa8.
[ initrd] [ 8.080307] dhcp: 328 bytes from 192.168.88.1.
[ initrd] [ 8.080328] 00000000:000001340000000000110000C0A85801C0A858FB004300440134000002010600 ...4.........X...X..C.D.4......
[ initrd] [ 8.080342] 00000020:67458B6B0000000000000000C0A858FBC0A8580100000000606720F2BB180000 gE.k..........X...X.....`g ....
[ initrd] [ 8.080356] 00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 8.080365] 00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 8.080372] 00000080:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 8.080380] 000000a0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 8.080387] 000000c0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 8.080395] 000000e0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 8.080402] 00000100:0000000000000000638253633501023604C0A858013304000002580104FFFFFF ........c.Sc5..6...X.3....X.....
[ initrd] [ 8.080410] 00000120:000304C0A85801060401010101FF000000000000000000000000000000000000 .....X..........................
[ initrd] [ 8.080417] 00000140:0000000000000000 ........
[ initrd] [ 9.144113] dhcp: 328 bytes from 192.168.88.1.
[ initrd] [ 9.144131] 00000000:000001340000000000110000C0A85801C0A858FB004300440134000002010600 ...4.........X...X..C.D.4......
[ initrd] [ 9.144143] 00000020:67458B6B0000000000000000C0A858FBC0A8580100000000606720F2BB180000 gE.k..........X...X.....`g ....
[ initrd] [ 9.144155] 00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 9.144163] 00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 9.144170] 00000080:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 9.144178] 000000a0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 9.144185] 000000c0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 9.144193] 000000e0:0000000000000000000000000000000000000000000000000000000000000000 ................................
[ initrd] [ 9.144200] 00000100:0000000000000000638253633501053604C0A858013304000002580104FFFFFF ........c.Sc5..6...X.3....X.....
[ initrd] [ 9.144210] 00000120:000304C0A85801060401010101FF000000000000000000000000000000000000 .....X..........................
[ initrd] [ 9.144218] 00000140:0000000000000000 ........
[ initrd] [ 9.160096] [DHCP] DHCP server address 192.168.88.1.
[ initrd] [ 9.160116] [DHCP] IP 192.168.88.251 mask 255.255.255.0.
[ initrd] [ 9.160129] [DHCP] Default gateway 192.168.88.1.
[ initrd] [ 9.160141] [DHCP] DNS 1.1.1.1.
[ initrd] [ 9.160153] [DHCP] HTTP IP 192.168.1.30 already specified.
WTC listener is active.
WTC broadcast listener is active.
Send broadcast WTCU discover.
[ initrd] [ 9.198763] Run OpenVPN with user config configs/openvpn.cfg.
[ initrd] [ 9.198782] [NTP] Disabled.
[ initrd] [ 9.198795] modprobe tun.
[ initrd] [ 9.200024] +--- Executing "/usr/sbin/openvpn --config /etc/client.conf --daemon"
[ KERNEL] [ 9.199832] tun: Universal TUN/TAP device driver, 1.6
[SYSLOG] <29>Nov 1 15:13:55 openvpn[1072]: OpenVPN 2.4.7 i686-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Feb 20 2019
[SYSLOG] <29>Nov 1 15:13:55 openvpn[1072]: library versions: OpenSSL 1.1.1c 28 May 2019, LZO 2.10
[ initrd] [ 9.257397] +- Errorlevel: 0, output:
File is empty.
[ initrd] [ 9.257449] +------------------------
[SYSLOG] <29>Nov 1 15:13:55 openvpn[1073]: TCP/UDP: Preserving recently used remote address: [AF_INET]10.10.10.254:1195
[SYSLOG] <29>Nov 1 15:13:55 openvpn[1073]: Attempting to establish TCP connection with [AF_INET]10.10.10.254:1195 [nonblock]
[SYSLOG] <29>Nov 1 15:13:56 openvpn[1073]: TCP connection established with [AF_INET]10.10.10.254:1195
[SYSLOG] <29>Nov 1 15:13:56 openvpn[1073]: TCP_CLIENT link local (bound): [AF_INET][undef]:0
[SYSLOG] <29>Nov 1 15:13:56 openvpn[1073]: TCP_CLIENT link remote: [AF_INET]10.10.10.254:1195
[SYSLOG] <29>Nov 1 15:13:56 openvpn[1073]: [LAB] Peer Connection Initiated with [AF_INET]10.10.10.254:1195
[SYSLOG] <29>Nov 1 15:13:57 openvpn[1073]: TUN/TAP device tun0 opened
[SYSLOG] <29>Nov 1 15:13:57 openvpn[1073]: /sbin/ip link set dev tun0 up mtu 1500
[SYSLOG] <29>Nov 1 15:13:57 openvpn[1073]: /sbin/ip addr add dev tun0 7.7.7.2/24 broadcast 7.7.7.255
[SYSLOG] <28>Nov 1 15:13:57 openvpn[1073]: WARNING: this configuration may cache passwords in memory -- use the auth-nocache option to prevent this
[SYSLOG] <29>Nov 1 15:13:57 openvpn[1073]: Initialization Sequence Completed
[ initrd] [ 11.723535] OpenVPN tun0: my IP 7.7.7.2.
[ initrd] [ 11.723598] Run '/sbin/httpd', log '/tmp/httpd.out', env '', pid ''.
[ pfac] [ 11.723727] Run /sbin/httpd.
[ initrd] [ 11.723737] [HTTP] Download config file /wtware/Everyone/list.wtc from 192.168.1.30.
[ pfac] [ 11.723746] Ok, PID 1177.
[ initrd] [ 11.734262] [HTTP] Download config file /wtware/Terminals/60.67.20.F2.BB.18/config.wtc from 192.168.1.30.
[ httpd] [ 11.738291] Internal HTTP Server, WTware 5.8.67
[ initrd] [ 11.789082] [HTTP] Download config file /wtware/Terminals/60.67.20.F2.BB.18/wtware.lic from 192.168.1.30.
[ initrd] [ 11.845992] [HTTP] File not found.
/--- FILE "/tmp/config.wtc" -----------------------
| clienthostname=ARM*MAC
| discover=192.168.1.30
| redraw_delay=50
| infobox=always, shutdown, reboot
| server=buhgalter.it-works.local
| extra=DNS.zip
| display=1600x900
| domain=it-works.local
| onerror=quiet
| turnoffmenu=poweroff
| sleep=5,suspend
| ask_password=on
| usb=03f0:612a, debug
| connection
\----------------------------------------------------
[ initrd] [ 11.846073] [HTTP] Download config file /wtware/Everyone/all.wtc from 192.168.1.30.
/--- FILE "/tmp/all.wtc" -----------------------
| server=192.168.1.64
\----------------------------------------------------
[ initrd] [ 11.859928] [HTTP] Download config file /wtware/Everyone/wtware.lic from 192.168.1.30.
[ initrd] [ 11.910458] Remount /bootmedia for writing.
[ initrd] [ 11.910858] Remount /bootmedia as read-only.
/--- FILE "/etc/config.compiled" -----------------------
| [BOM]
| server=buhgalter.it-works.local
| clienthostname=ARM*MAC
| discover=192.168.1.30
| redraw_delay=50
| infobox=always, shutdown, reboot
| extra=DNS.zip
| display=1600x900
| domain=it-works.local
| onerror=quiet
| turnoffmenu=poweroff
| sleep=5,suspend
| ask_password=on
| usb=03f0:612a, debug
| connection
\----------------------------------------------------
[ initrd] [ 11.913561] Hostname: "ARM606720F2BB18".
[ initrd] [ 12.012119] [NTP] 42 DHCP option is not set.
Everyone can control terminal by RSH.
RSH: listener is active.
Send broadcast WTCU discover.
Send WTCU discover to 192.168.1.30.
[ httpd] [ 12.012846] Reread settings.
[ httpd] [ 12.012877] Everyone can control terminal by HTTP.
[ initrd] [ 12.013407] Use 'video=i915(F)' driver.
/--- FILE "/etc/config.compiled" -----------------------
| [BOM]
| server=buhgalter.it-works.local
| clienthostname=ARM*MAC
| discover=192.168.1.30
| redraw_delay=50
| infobox=always, shutdown, reboot
| extra=DNS.zip
| display=1600x900
| domain=it-works.local
| onerror=quiet
| turnoffmenu=poweroff
| sleep=5,suspend
| ask_password=on
| usb=03f0:612a, debug
| video=i915(F)
| connection
\----------------------------------------------------
[ initrd] [ 12.111652] [FILE CACHE] Take 'packages/f' from cache.
[ initrd] [ 12.148973] [FILE CACHE] Take 'packages/fwt6' from cache.
[ initrd] [ 12.195272] [FILE CACHE] Take 'packages/f-i915' from cache.
[ initrd] [ 12.221115] [FILE CACHE] Take 'packages/graphic' from cache.
[ gm] [ 12.242012] WTware 5.8.67 session manager.
[ gm] [ 12.242239] Load agpgart driver.
[ gm] [ 12.242256] modprobe agpgart.
[ gm] [ 12.243378] modprobe intel-agp.
[ KERNEL] [ 12.243261] Linux agpgart interface v0.103
[ gm] [ 12.244525] EV_REL flag found. Add mouse event8: TPPS/2 IBM TrackPoint.
[ gm] [ 12.244550] Add keyboard event7: Logitech USB Receiver.
[ gm] [ 12.244565] Add keyboard event6: Logitech USB Receiver.
[ gm] [ 12.244584] EV_ABS flag found. Add mouse event5: SynPS/2 Synaptics TouchPad.
[ gm] [ 12.244598] Add keyboard event4: AT Translated Set 2 keyboard.
[ gm] [ 12.244611] Ignore event3: PC Speaker.
[ gm] [ 12.284102] Add keyboard event2: Power Button.
[ gm] [ 12.284121] Add keyboard event1: Sleep Button.
[ gm] [ 12.284131] Ignore event0: Lid Switch.
[ gm] [ 12.328123] Display mode: 1600x900, 32 bit, landscape, 0 Hz, modeline "", DDC enabled, connector 0.
[ gm] [ 12.493431] modprobe drm.
[ gm] [ 12.495148] Run modprobe i915 modeset=1.
[ gm] [ 12.495181] modprobe i915 modeset=1.
[ KERNEL] [ 12.499801] [drm] Memory usable by graphics device = 2048M
[ KERNEL] [ 12.499803] [drm] Replacing VGA console driver
[ KERNEL] [ 12.499853] Console: switching to colour dummy device 80x25
[ KERNEL] [ 12.505722] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ KERNEL] [ 12.505722] [drm] Driver supports precise vblank timestamp query.
[ KERNEL] [ 12.579133] [drm] Initialized i915 1.6.0 20170818 for 0000:00:02.0 on minor 0
[ KERNEL] [ 12.579526] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ KERNEL] [ 12.579778] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[ gm] [ 13.063563] Kernel drm/kms module loaded.
[ KERNEL] [ 13.063065] fbcon: inteldrmfb (fb0) is primary device
[ KERNEL] [ 13.063141] Console: switching to colour frame buffer device 200x56
[ KERNEL] [ 13.063152] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ gm] [ 14.620622] count_fbs 0.
[ gm] [ 14.620675] count_crtcs 3.
[ gm] [ 14.620697] count_connectors 8.
[ gm] [ 14.620715] count_encoders 8.
[ gm] [ 14.620728] min_width 0, max_width 8192, min_height 0, max_height 8192.
[ gm] [ 14.620740] ======================
[ gm] [ 14.620751] connector_id 57.
[ gm] [ 14.620762] encoder_id 58.
[ gm] [ 14.620772] connector_type LVDS (7).
[ gm] [ 14.620784] connector_type_id 1.
[ gm] [ 14.620794] connection 1.
[ gm] [ 14.620812] mm_width 310, mm_height 170.
[ gm] [ 14.620832] subpixel 1.
[ gm] [ 14.620847] count_modes 1.
[ gm] [ 14.620859] count_props 4.
[ gm] [ 14.620871] count_encoders 1.
[ gm] [ 14.620882] encoders_ptr [58]
[ gm] [ 14.620894] ======================
[ gm] [ 14.630637] ======================
[ gm] [ 14.630676] connector_id 63.
[ gm] [ 14.630686] encoder_id 0.
[ gm] [ 14.630695] connector_type VGA (1).
[ gm] [ 14.630704] connector_type_id 1.
[ gm] [ 14.630713] connection 2.
[ gm] [ 14.630721] mm_width 0, mm_height 0.
[ gm] [ 14.630730] subpixel 0.
[ gm] [ 14.630738] count_modes 0.
[ gm] [ 14.630746] count_props 3.
[ gm] [ 14.630754] count_encoders 1.
[ gm] [ 14.630763] encoders_ptr [64]
[ gm] [ 14.630771] ======================
[ gm] [ 15.060073] ======================
[ gm] [ 15.060122] connector_id 66.
[ gm] [ 15.060139] encoder_id 0.
[ gm] [ 15.060150] connector_type HDMIA (11).
[ gm] [ 15.060160] connector_type_id 1.
[ gm] [ 15.060170] connection 2.
[ gm] [ 15.060180] mm_width 0, mm_height 0.
[ gm] [ 15.060191] subpixel 0.
[ gm] [ 15.060201] count_modes 0.
[ gm] [ 15.060211] count_props 6.
[ gm] [ 15.060221] count_encoders 1.
[ gm] [ 15.060231] encoders_ptr [65]
[ gm] [ 15.060241] ======================
[ gm] [ 15.060252] ======================
[ gm] [ 15.060270] connector_id 71.
[ gm] [ 15.060285] encoder_id 0.
[ gm] [ 15.060295] connector_type DisplayPort (10).
[ gm] [ 15.060306] connector_type_id 1.
[ gm] [ 15.060316] connection 2.
[ gm] [ 15.060326] mm_width 0, mm_height 0.
[ gm] [ 15.060336] subpixel 0.
[ gm] [ 15.060346] count_modes 0.
[ gm] [ 15.060356] count_props 5.
[ gm] [ 15.060366] count_encoders 1.
[ gm] [ 15.060378] encoders_ptr [70]
[ gm] [ 15.060388] ======================
[ gm] [ 15.078218] ======================
[ gm] [ 15.078261] connector_id 73.
[ gm] [ 15.078275] encoder_id 0.
[ gm] [ 15.078287] connector_type HDMIA (11).
[ gm] [ 15.078299] connector_type_id 2.
[ gm] [ 15.078310] connection 2.
[ gm] [ 15.078321] mm_width 0, mm_height 0.
[ gm] [ 15.078332] subpixel 0.
[ gm] [ 15.078342] count_modes 0.
[ gm] [ 15.078352] count_props 6.
[ gm] [ 15.078369] count_encoders 1.
[ gm] [ 15.078390] encoders_ptr [72]
[ gm] [ 15.078402] ======================
[ gm] [ 15.095290] ======================
[ gm] [ 15.095341] connector_id 75.
[ gm] [ 15.095363] encoder_id 0.
[ gm] [ 15.095383] connector_type HDMIA (11).
[ gm] [ 15.095403] connector_type_id 3.
[ gm] [ 15.095423] connection 2.
[ gm] [ 15.095442] mm_width 0, mm_height 0.
[ gm] [ 15.095460] subpixel 0.
[ gm] [ 15.095478] count_modes 0.
[ gm] [ 15.095497] count_props 6.
[ gm] [ 15.095516] count_encoders 1.
[ gm] [ 15.095535] encoders_ptr [74]
[ gm] [ 15.095557] ======================
[ gm] [ 15.095569] ======================
[ gm] [ 15.095580] connector_id 77.
[ gm] [ 15.095592] encoder_id 0.
[ gm] [ 15.095602] connector_type DisplayPort (10).
[ gm] [ 15.095613] connector_type_id 2.
[ gm] [ 15.095624] connection 2.
[ gm] [ 15.095635] mm_width 0, mm_height 0.
[ gm] [ 15.095646] subpixel 0.
[ gm] [ 15.095658] count_modes 0.
[ gm] [ 15.095668] count_props 5.
[ gm] [ 15.095680] count_encoders 1.
[ gm] [ 15.095691] encoders_ptr [76]
[ gm] [ 15.095702] ======================
[ gm] [ 15.095713] ======================
[ gm] [ 15.095724] connector_id 79.
[ gm] [ 15.095735] encoder_id 0.
[ gm] [ 15.095746] connector_type DisplayPort (10).
[ gm] [ 15.095757] connector_type_id 3.
[ gm] [ 15.095769] connection 2.
[ gm] [ 15.095781] mm_width 0, mm_height 0.
[ gm] [ 15.095792] subpixel 0.
[ gm] [ 15.095813] count_modes 0.
[ gm] [ 15.095832] count_props 5.
[ gm] [ 15.095851] count_encoders 1.
[ gm] [ 15.095871] encoders_ptr [78]
[ gm] [ 15.095890] ======================
[ gm] [ 15.095909] ======================
[ gm] [ 15.095926] crtc_id 36.
[ gm] [ 15.095943] fb buffer_id 82.
[ gm] [ 15.095961] x 0, y 0.
[ gm] [ 15.095979] mode_valid 1.
[ gm] [ 15.095997] Mode 1600x900: clock 107800 H 1600 1648 1680 1920 0 V 900 903 908 936 0 VR 60 flags 0x000a type 0x0048.
[ gm] [ 15.096028] gamma_size 256.
[ gm] [ 15.096048] 0 connectors.
[ gm] [ 15.096065] ======================
[ gm] [ 15.096082] ======================
[ gm] [ 15.096099] crtc_id 46.
[ gm] [ 15.096116] fb buffer_id 0 (disconnected from fb).
[ gm] [ 15.096134] x 0, y 0.
[ gm] [ 15.096152] mode_valid 0.
[ gm] [ 15.096169] Mode : clock 0 H 0 0 0 0 0 V 0 0 0 0 0 VR 0 flags 0x0000 type 0x0000.
[ gm] [ 15.096187] gamma_size 256.
[ gm] [ 15.096204] 0 connectors.
[ gm] [ 15.096222] ======================
[ gm] [ 15.096240] ======================
[ gm] [ 15.096257] crtc_id 56.
[ gm] [ 15.096274] fb buffer_id 0 (disconnected from fb).
[ gm] [ 15.096291] x 0, y 0.
[ gm] [ 15.096308] mode_valid 0.
[ gm] [ 15.096326] Mode : clock 0 H 0 0 0 0 0 V 0 0 0 0 0 VR 0 flags 0x0000 type 0x0000.
[ gm] [ 15.096344] gamma_size 256.
[ gm] [ 15.096362] 0 connectors.
[ gm] [ 15.096379] ======================
[ gm] [ 15.096396] ======================
[ gm] [ 15.096414] encoder_id 58.
[ gm] [ 15.096432] encoder_type LVDS (3).
[ gm] [ 15.096450] crtc_id 36.
[ gm] [ 15.096468] possible_crtcs 7.
[ gm] [ 15.096485] possible_clones 1.
[ gm] [ 15.096502] ======================
[ gm] [ 15.096519] ======================
[ gm] [ 15.096537] encoder_id 64.
[ gm] [ 15.096555] encoder_type DAC (1).
[ gm] [ 15.096573] crtc_id 0.
[ gm] [ 15.096591] possible_crtcs 7.
[ gm] [ 15.096608] possible_clones 54.
[ gm] [ 15.096625] ======================
[ gm] [ 15.096639] ======================
[ gm] [ 15.096650] encoder_id 65.
[ gm] [ 15.096662] encoder_type TMDS (2).
[ gm] [ 15.096673] crtc_id 0.
[ gm] [ 15.096685] possible_crtcs 7.
[ gm] [ 15.096696] possible_clones 6.
[ gm] [ 15.096707] ======================
[ gm] [ 15.096719] ======================
[ gm] [ 15.096731] encoder_id 70.
[ gm] [ 15.096744] encoder_type TMDS (2).
[ gm] [ 15.096756] crtc_id 0.
[ gm] [ 15.096767] possible_crtcs 7.
[ gm] [ 15.096779] possible_clones 8.
[ gm] [ 15.096790] ======================
[ gm] [ 15.096801] ======================
[ gm] [ 15.096813] encoder_id 72.
[ gm] [ 15.096825] encoder_type TMDS (2).
[ gm] [ 15.096836] crtc_id 0.
[ gm] [ 15.096847] possible_crtcs 7.
[ gm] [ 15.096859] possible_clones 18.
[ gm] [ 15.096870] ======================
[ gm] [ 15.096881] ======================
[ gm] [ 15.096893] encoder_id 74.
[ gm] [ 15.096904] encoder_type TMDS (2).
[ gm] [ 15.096915] crtc_id 0.
[ gm] [ 15.096927] possible_crtcs 7.
[ gm] [ 15.096938] possible_clones 34.
[ gm] [ 15.096950] ======================
[ gm] [ 15.096962] ======================
[ gm] [ 15.096973] encoder_id 76.
[ gm] [ 15.096984] encoder_type TMDS (2).
[ gm] [ 15.096996] crtc_id 0.
[ gm] [ 15.097007] possible_crtcs 7.
[ gm] [ 15.097019] possible_clones 64.
[ gm] [ 15.097030] ======================
[ gm] [ 15.097042] ======================
[ gm] [ 15.097053] encoder_id 78.
[ gm] [ 15.097065] encoder_type TMDS (2).
[ gm] [ 15.097076] crtc_id 0.
[ gm] [ 15.097088] possible_crtcs 7.
[ gm] [ 15.097099] possible_clones 128.
[ gm] [ 15.097111] ======================
/--- FILE "/proc/mtrr" -----------------------
| reg00: base=0x0ffc00000 ( 4092MB), size= 4MB, count=1: write-protect
| reg01: base=0x000000000 ( 0MB), size= 2048MB, count=1: write-back
| reg02: base=0x080000000 ( 2048MB), size= 1024MB, count=1: write-back
| reg03: base=0x0c0000000 ( 3072MB), size= 512MB, count=1: write-back
| reg04: base=0x0dc000000 ( 3520MB), size= 64MB, count=1: uncachable
| reg05: base=0x0db000000 ( 3504MB), size= 16MB, count=1: uncachable
| reg06: base=0x100000000 ( 4096MB), size= 512MB, count=1: write-back
| reg07: base=0x11f000000 ( 4592MB), size= 16MB, count=1: uncachable
| reg08: base=0x11e800000 ( 4584MB), size= 8MB, count=1: uncachable
| reg09: base=0x11e600000 ( 4582MB), size= 2MB, count=1: uncachable
\----------------------------------------------------
[ gm] [ 15.097186] Connector Id 57.
[ gm] [ 15.097218] Encoder Id 58.
[ gm] [ 15.097231] CRTC Id 36.
[ gm] [ 15.097243] Force 60Hz refresh.
[ gm] [ 15.097256] Mode 1600x900: clock 107800 H 1600 1648 1680 1920 0 V 900 903 908 936 0 VR 60 flags 0x000a type 0x0048.
[ gm] [ 15.097268] ^^^ Use this mode ^^^.
[ gm] [ 15.097280] Once more, choose this mode:
[ gm] [ 15.097292] Mode 1600x900: clock 107800 H 1600 1648 1680 1920 0 V 900 903 908 936 0 VR 60 flags 0x000a type 0x0048.
[ gm] [ 15.097305] fb_ptr 0xb763b000
[ gm] [ 15.097316] stride 6400.
[ gm] [ 15.097328] size 5760000.
[ gm] [ 15.097340] handle 0x00000001.
[ gm] [ 15.098927] ======================
[ gm] [ 15.098941] fb_id 0.
[ gm] [ 15.098952] width 1600.
[ gm] [ 15.098965] height 900.
[ gm] [ 15.098977] pitch 6400.
[ gm] [ 15.098989] bpp 32.
[ gm] [ 15.099001] depth 24.
[ gm] [ 15.099013] handle 0x00000001.
[ gm] [ 15.099025] ======================
[ gm] [ 15.110299] LINELENBYTES 6400, VBUF 0x0xb763b000.
[ gm] [ 15.128631] Use /lib/ui32.so.
[ gm] [ 15.234146] WMEMCOPY: 54000K copied in 0.009821 sec.
[ gm] [ 15.243823] libc: 54000K copied in 0.009669 sec.
[ gm] [ 15.253519] movs: 54000K copied in 0.009679 sec.
[ gm] [ 15.263360] MMX: 54000K copied in 0.009815 sec.
[ gm] [ 15.272958] SSE2: 54000K copied in 0.009583 sec.
[ gm] [ 15.273034] Choose SSE2 memcpy.
[ gm] [ 15.274115] [HTTP] Download config file /wtware/Everyone/DNS.zip from 192.168.1.30.
[ gm] [ 15.287084] +--- Executing "/bin/unzip -n -d / /tmp/extra-DNS.zip"
[ gm] [ 15.287733] +- Errorlevel: 0, output:
| Archive: /tmp/extra-DNS.zip
| inflating: runme
[ gm] [ 15.287792] +------------------------
[ gm] [ 15.287891] Run '/bin/sh /runme2unix', log '/tmp/extra.out', env '', pid ''.
[ pfac] [ 15.287914] Run /bin/sh /runme2unix.
[ pfac] [ 15.287950] Ok, PID 1257.
[ gm] [ 15.288027] Run '/sbin/rdpdr[usb] 03f0:612a debug', log '/tmp/rdpdr[usb].out', env '', pid ''.
[ pfac] [ 15.288044] Run /sbin/rdpdr[usb] 03f0:612a debug.
[ pfac] [ 15.288090] Ok, PID 1258.
[rdpdr-usb 03f0:612a] [ 15.288539] RDP USB Redirector, WTware 5.8.67
[rdpdr-usb 03f0:612a] [ 15.288581] [DEBUG] Open listener at /tmp/rdpdr[usb]_03f0:612a. Main thread 0xb7d89700.
[rdpdr-usb 03f0:612a] [ 15.288613] [DEBUG] Init libusb.
[EXTRA] close kotopipe (n = 0, errno 0).
[ pfac] [ 15.288648] Process pid 1257 terminated, status 00000000.
[rdpdr-usb 03f0:612a] [ 15.289433] Device connected. USB Id 03f0:612a, bus Id 1-1.2, BUSNUM 1, DEVNUM 3.
[rdpdr-usb 03f0:612a] [ 15.289459] [DEBUG] Ignore 0a5c:21e6.
[rdpdr-usb 03f0:612a] [ 15.289482] [DEBUG] Ignore 04f2:b2db.
[rdpdr-usb 03f0:612a] [ 15.289503] [DEBUG] Ignore 1d6b:0003.
[rdpdr-usb 03f0:612a] [ 15.289524] [DEBUG] Ignore 046d:c534.
[rdpdr-usb 03f0:612a] [ 15.289545] [DEBUG] Ignore 147e:2020.
[rdpdr-usb 03f0:612a] [ 15.289566] [DEBUG] Ignore 8087:0024.
[rdpdr-usb 03f0:612a] [ 15.289588] [DEBUG] Ignore 1d6b:0002.
[rdpdr-usb 03f0:612a] [ 15.289610] [DEBUG] Ignore 8087:0024.
[rdpdr-usb 03f0:612a] [ 15.289631] [DEBUG] Ignore 1d6b:0002.
[rdpdr-usb 03f0:612a] [ 15.289652] [DEBUG] Ignore 1d6b:0002.

[ gm] [ 15.293087] Run '/sbin/resolver 0xc52220 dns [buhgalter.it-works.local]', log '', env '', pid ''.
[ pfac] [ 15.293118] Run /sbin/resolver 0xc52220 dns [buhgalter.it-works.local].
[ pfac] [ 15.293156] Ok, PID 1261.
[ gm] [ 15.293184] Nobody can control terminal by VNC.
[ gm] [ 15.293216] Add keyboard event9: Video Bus.
[ gm] [ 15.300990] buhgalter.it-works.local => 10.10.0.13.
[ pfac] [ 15.301092] Process pid 1261 terminated, status 00000000.
-------------------------------------------------------------------------------------------------
Возможно я допускаю одну и ту же ошибку, или же требую невозможного. Но пока не знаю, как вот такую задачу решить. Немного даже смешно.
В любом случае, буду рад если кто-то поделится опытом о том как пробрасывать USB принтеры в терминал. Задача, как оказалась, очень даже нужная и немного нетривиальная.

aka
Разработчик
Разработчик
Сообщения: 10226
Зарегистрирован: Ср окт 01, 2003 12:06 am
Откуда: Роcсия, Тольятти
Контактная информация:

Re: Установка USB принтера на терминал Windows 10

Сообщение aka » Пт ноя 01, 2019 11:34 pm

RKV писал(а):
Пт ноя 01, 2019 6:23 pm
На официальном сайте HP под ОС Windows 10 x64 есть ПО с драйверами, вот только при установке требуется, чтобы USB устройство было подключено.
Проблему лучше решать, оставаясть в виндовсах, без ПО сторонних производителей. Например, подключи принтер к какому-нибудь другому виндовсу, поставь драйвера на этот другой виндовс, расшарь в сеть и подключи к серверу как сетевой. При опдключении сетевого драйвера иногда ставятся сами...

Ответить